1 files changed, 38 insertions, 11 deletions

diff --git a/main.ino b/main.ino
index bc27deb..604bdef 100644
--- a/main.ino
+++ b/main.ino
@@ -2,6 +2,20 @@
 #include <SensirionI2CScd4x.h>
 #include <Wire.h>
 
+#define LILYGO_T5_V213 // needed for the display libraries
+
+#include <boards.h>
+#include <GxEPD.h>
+#include <GxGDEH0213B73/GxGDEH0213B73.h>  // screen model, probably correct
+#include <Fonts/FreeMonoBold12pt7b.h>
+#include <GxIO/GxIO_SPI/GxIO_SPI.h>
+#include <GxIO/GxIO.h>
+
+GxIO_Class io(SPI,  EPD_CS, EPD_DC,  EPD_RSET);
+GxEPD_Class display(io, EPD_RSET, EPD_BUSY);
+SPIClass SDSPI(VSPI); // for sdcard? maybe?
+
+
 SensirionI2CScd4x scd4x;
 
 void printUint16Hex(uint16_t value) {
@@ -28,6 +42,15 @@ void setup() {
 
     Wire.begin(21,22);
 
+    SPI.begin(EPD_SCLK, EPD_MISO, EPD_MOSI);
+
+    display.init();
+    display.setTextColor(GxEPD_BLACK);
+    display.setRotation(3);
+    display.setFont(&FreeMonoBold12pt7b);
+    display.fillScreen(GxEPD_WHITE);
+    display.update();
+
     uint16_t error;
     char errorMessage[256];
 
@@ -75,20 +98,24 @@ void loop() {
     float temperature = 0.0f;
     float humidity = 0.0f;
     error = scd4x.readMeasurement(co2, temperature, humidity);
+
+    display.fillScreen(GxEPD_WHITE);
+    display.setCursor(0,20);
+
     if (error) {
-        Serial.print("Error trying to execute readMeasurement(): ");
+        display.print("read error: ");
         errorToString(error, errorMessage, 256);
-        Serial.println(errorMessage);
+        display.println(errorMessage);
     } else if (co2 == 0) {
-        Serial.println("Invalid sample detected, skipping.");
+        display.println("Invalid sample detected, skipping.");
     } else {
-        Serial.print("Co2:");
-        Serial.print(co2);
-        Serial.print("\t");
-        Serial.print("Temperature:");
-        Serial.print(temperature);
-        Serial.print("\t");
-        Serial.print("Humidity:");
-        Serial.println(humidity);
+        display.print("Co2:");
+        display.println(co2);
+        display.print("Temperature:");
+        display.println(temperature);
+        display.print("Humidity:");
+        display.println(humidity);
     }
+
+    display.update();
 }