1 files changed, 85 insertions, 0 deletions
diff --git a/tools/settings.sh b/tools/settings.sh
new file mode 100644
index 0000000..d5b8fdf
--- /dev/null
+++ b/tools/settings.sh
@@ -0,0 +1,85 @@
+## NEEDS: LIBRARY, SKETCH, ROOT, SOURCEDIR
+## Should be included when the current directory is the dir of the Sketch.
+
+case "$0" in
+    */settings.sh)
+        echo "This file must be included, never run directly!" >&2
+        exit 1
+        ;;
+esac
+
+SKETCH="${SKETCH:-${DEFAULT_SKETCH}}"
+LIBRARY="${LIBRARY:-${SKETCH}}"
+
+if [ -z "${SKETCH}" ] || [ -z "${LIBRARY}" ] || [ -z "${ROOT}" ] || [ -z "${SOURCEDIR}" ]; then
+    echo "SKETCH, LIBRARY, SOURCEDIR, and ROOT need to be set before including this file!" >&2
+    exit 1
+fi
+
+BOARD="${BOARD:-model01}"
+MCU="${MCU:-atmega32u4}"
+FQBN="${FQBN:-keyboardio:avr:${BOARD}}"
+
+DEVICE_PORT="$(ls /dev/ttyACM* 2>/dev/null || echo '')"
+DEVICE_PORT_BOOTLOADER="$(ls /dev/ttyACM* 2>/dev/null || echo '')"
+
+RESET_DEVICE="stty -F ${DEVICE_PORT} 1200 hupcl"
+
+ARDUINO_PATH="${ARDUINO_PATH:-/usr/local/arduino}"
+ARDUINO_LOCAL_LIB_PATH="${ARDUINO_LOCAL_LIB_PATH:-${HOME}/Arduino}"
+ARDUINO_TOOLS_PATH="${ARDUINO_TOOLS_PATH:-${ARDUINO_PATH}/hardware/tools}"
+ARDUINO_BUILDER="${ARDUINO_BUILDER:-${ARDUINO_PATH}/arduino-builder}"
+ARDUINO_IDE_VERSION="100607"
+
+BOARD_HARDWARE_PATH="${BOARD_HARDWARE_PATH:-${ARDUINO_LOCAL_LIB_PATH}/hardware}"
+BOOTLOADER_PATH="${BOARD_HARDWARE_PATH}/keyboardio/avr/bootloaders/caterina/Caterina.hex"
+
+AVR_SIZE="${AVR_SIZE:-${ARDUINO_TOOLS_PATH}/avr/bin/avr-size}"
+AVR_NM="${AVR_NM:-${ARDUINO_TOOLS_PATH}/avr/bin/avr-nm}"
+AVR_OBJDUMP="${AVR_OBJDUMP:-${ARDUINO_TOOLS_PATH}/avr/bin/avr-objdump}"
+
+MD5="md5sum"
+
+BUILD_PATH="${BUILD_PATH:-$(mktemp -d 2>/dev/null || mktemp -d -t 'build')}"
+OUTPUT_DIR="${OUTPUT_DIR:-output/${LIBRARY}}"
+OUTPUT_PATH="${OUTPUT_PATH:-${SOURCEDIR}/${OUTPUT_DIR}}"
+
+GIT_VERSION="$(cd $(find_sketch); git describe --abbrev=4 --dirty --always)"
+LIB_VERSION="$(cd $(find_sketch); (grep version= ../../library.properties 2>/dev/null || echo version=0.0.0) | cut -d= -f2)-g${GIT_VERSION}"
+
+OUTPUT_FILE_PREFIX="${SKETCH}-${LIB_VERSION}"
+
+HEX_FILE_PATH="${OUTPUT_PATH}/${OUTPUT_FILE_PREFIX}.hex"
+HEX_FILE_WITH_BOOTLOADER_PATH="${OUTPUT_PATH}/${OUTPUT_FILE_PREFIX}-with-bootloader.hex"
+ELF_FILE_PATH="${OUTPUT_PATH}/${OUTPUT_FILE_PREFIX}.elf"
+
+ARDUINO_TOOLS_PARAM="-tools ${ARDUINO_TOOLS_PATH}"
+if [ -z "${ARDUINO_TOOLS_PATH}" ]; then
+    ARDUINO_TOOLS_PARAM=""
+fi
+
+if [ ! -z "${AVR_GCC_PREFIX}" ]; then
+    ARDUINO_AVR_GCC_PREFIX_PARAM="-prefs \"runtime.tools.avr-gcc.path=${AVR_GCC_PREFIX}\""
+fi
+
+if [ ! -z "${VERBOSE}" ] && [ "${VERBOSE}" -gt 0 ]; then
+    ARDUINO_VERBOSE="-verbose"
+else
+    ARDUINO_VERBOSE="-quiet"
+fi
+
+## Platform-specific overrides
+# Shamelessly stolen from git's Makefile
+uname_S=$(uname -s 2>/dev/null || echo not)
+
+if [ "${uname_S}" = "Darwin" ]; then
+    DEVICE_PORT="$(ls /dev/cu.usbmodemHID?? /dev/cu.usbmodem14*)"
+    DEVICE_PORT_BOOTLOADER="$(ls /dev/cu.usbmodem14*)"
+
+    ARDUINO_PATH="/Applications/Arduino.app/Contents/Java/"
+    ARDUINO_LOCAL_LIB_PATH="${HOME}/Documents/Arduino"
+
+    MD5="md5"
+
+    RESET_DEVICE="stty -f ${DEVICE_PORT} 1200"
+fi