From 0ee5a937a5026b64e82492c396b8fbcb2b4052de Mon Sep 17 00:00:00 2001 From: Jesse Vincent Date: Fri, 8 Sep 2017 00:39:40 -0400 Subject: A couple explanatory notes suggested by Jennifer Leigh --- README.md | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'README.md') diff --git a/README.md b/README.md index 641a9ff..c396e87 100644 --- a/README.md +++ b/README.md @@ -53,6 +53,8 @@ git clone https://github.com/keyboardio/Model01-Firmware.git # Build and flash the firmware +Before you begin, make sure your Model 01 is connected to your computer. + ### Option 1: From the command line ```sh @@ -60,15 +62,16 @@ cd Model01-Firmware make flash ``` -When the builder tells you to hit Enter to continue, hold down "Prog" on your keyboard and hit Enter. +When the builder tells you to hit Enter to continue, hold down "Prog" in the top left corner of your keyboard and hit Enter. ### Option 2: From the Arduino IDE + Open the sketch you wish to flash (for example, `Model01-Firmware.ino`). Click the Upload button or press `Ctrl-U`. -Hold down "Prog" on your keyboard, particularly when the compile finishes and the upload begins. +Hold down the "Prog" key in the top left corner of your keyboard, until the compile finishes and the upload begins. # Thanks! -- cgit v1.2.3