SF35 initial profile

46 files changed, 521 insertions, 0 deletions

diff --git a/profiles/comment.csv b/profiles/comment.csv
new file mode 100644
index 0000000..df35361
--- /dev/null
+++ b/profiles/comment.csv
@@ -0,0 +1,5 @@
+Format is tab separated comment settings.
+Name                          	Value
+WindowPosition	0+0
+Activate Comment	False
+Open File to Write Comments for	
diff --git a/profiles/cutting.csv b/profiles/cutting.csv
new file mode 100644
index 0000000..343333d
--- /dev/null
+++ b/profiles/cutting.csv
@@ -0,0 +1,4 @@
+Format is tab separated cutting settings.
+Name                          	Value
+WindowPosition	0+400
+Profile Selection:	end_mill
diff --git a/profiles/description.csv b/profiles/description.csv
new file mode 100644
index 0000000..6eec4a6
--- /dev/null
+++ b/profiles/description.csv
@@ -0,0 +1,4 @@
+Format is tab separated description settings.
+Name                          	Value
+WindowPosition	0+0
+Description Text:	Write your description of the profile here.___replaced___newline___replaced___newlineSuggested format is a description, followed by a link to the profile post or web page.
diff --git a/profiles/extrusion.csv b/profiles/extrusion.csv
new file mode 100644
index 0000000..3db7596
--- /dev/null
+++ b/profiles/extrusion.csv
@@ -0,0 +1,4 @@
+Format is tab separated extrusion settings.
+Name                          	Value
+WindowPosition	0+400
+Profile Selection:	ABS
diff --git a/profiles/extrusion/ABS/bottom.csv b/profiles/extrusion/ABS/bottom.csv
new file mode 100644
index 0000000..f7ced9a
--- /dev/null
+++ b/profiles/extrusion/ABS/bottom.csv
@@ -0,0 +1,7 @@
+Format is tab separated bottom settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Bottom	
+Activate Bottom:	True
+Altitude (mm):	0.3
+SVG Viewer:	webbrowser
diff --git a/profiles/extrusion/ABS/carve.csv b/profiles/extrusion/ABS/carve.csv
new file mode 100644
index 0000000..f3a0517
--- /dev/null
+++ b/profiles/extrusion/ABS/carve.csv
@@ -0,0 +1,16 @@
+Format is tab separated carve settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Carve	
+Add Layer Template to SVG	True
+Bridge Thickness Multiplier (ratio):	1.0
+Extra Decimal Places (float):	1.0
+Import Coarseness (ratio):	1.0
+Infill in Direction of Bridges	True
+Layer Thickness (mm):	0.4
+Layers From (index):	0
+Layers To (index):	912345678
+Correct Mesh	True
+Unproven Mesh	False
+Perimeter Width over Thickness (ratio):	1.45
+SVG Viewer:	webbrowser
diff --git a/profiles/extrusion/ABS/chamber.csv b/profiles/extrusion/ABS/chamber.csv
new file mode 100644
index 0000000..ce8dd85
--- /dev/null
+++ b/profiles/extrusion/ABS/chamber.csv
@@ -0,0 +1,8 @@
+Format is tab separated chamber settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Chamber	
+Activate Chamber:	False
+Bed Temperature (Celcius):	60.0
+Chamber Temperature (Celcius):	30.0
+Holding Force (bar):	0.0
diff --git a/profiles/extrusion/ABS/clip.csv b/profiles/extrusion/ABS/clip.csv
new file mode 100644
index 0000000..e14c474
--- /dev/null
+++ b/profiles/extrusion/ABS/clip.csv
@@ -0,0 +1,7 @@
+Format is tab separated clip settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Clip	
+Activate Clip	False
+Clip Over Perimeter Width (ratio):	0.5
+Maximum Connection Distance Over Perimeter Width (ratio):	10.0
diff --git a/profiles/extrusion/ABS/comb.csv b/profiles/extrusion/ABS/comb.csv
new file mode 100644
index 0000000..dc68f7d
--- /dev/null
+++ b/profiles/extrusion/ABS/comb.csv
@@ -0,0 +1,5 @@
+Format is tab separated comb settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Comb	
+Activate Comb	True
diff --git a/profiles/extrusion/ABS/cool.csv b/profiles/extrusion/ABS/cool.csv
new file mode 100644
index 0000000..9c76d7d
--- /dev/null
+++ b/profiles/extrusion/ABS/cool.csv
@@ -0,0 +1,12 @@
+Format is tab separated cool settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Cool	
+Activate Cool	False
+Orbit	True
+Slow Down	False
+Maximum Cool (Celcius):	2.0
+Minimum Layer Time (seconds):	5.0
+Minimum Orbital Radius (millimeters):	10.0
+Turn Fan On at Beginning	False
+Turn Fan Off at Ending	False
diff --git a/profiles/extrusion/ABS/dimension.csv b/profiles/extrusion/ABS/dimension.csv
new file mode 100644
index 0000000..e31ca32
--- /dev/null
+++ b/profiles/extrusion/ABS/dimension.csv
@@ -0,0 +1,10 @@
+Format is tab separated dimension settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Dimension	
+Activate Dimension	False
+Absolute Extrusion Distance	True
+Relative Extrusion Distance	False
+Extruder Retraction Speed (mm/s):	13.3
+Retraction Distance (millimeters):	0.0
+Restart Extra Distance (millimeters):	0.0
diff --git a/profiles/extrusion/ABS/export.csv b/profiles/extrusion/ABS/export.csv
new file mode 100644
index 0000000..4ec0003
--- /dev/null
+++ b/profiles/extrusion/ABS/export.csv
@@ -0,0 +1,14 @@
+Format is tab separated export settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Export	
+Activate Export	True
+Also Send Output To:	
+Delete Comments	False
+Do Not Change Output	True
+binary_16_byte	False
+gcode_step	False
+gcode_time_segment	False
+gcode_small	False
+File Extension:	gcode
+Save Penultimate Gcode	False
diff --git a/profiles/extrusion/ABS/fill.csv b/profiles/extrusion/ABS/fill.csv
new file mode 100644
index 0000000..d873ea5
--- /dev/null
+++ b/profiles/extrusion/ABS/fill.csv
@@ -0,0 +1,33 @@
+Format is tab separated fill settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Fill	
+Activate Fill:	True
+Diaphragm Period (layers):	100
+Diaphragm Thickness (layers):	0
+Extra Shells on Alternating Solid Layer (layers):	2
+Extra Shells on Base (layers):	2
+Extra Shells on Sparse Layer (layers):	2
+Grid Circle Separation over Perimeter Width (ratio):	0.2
+Grid Extra Overlap (ratio):	0.1
+Grid Junction Separation Band Height (layers):	10
+Grid Junction Separation over Octogon Radius At End (ratio):	0.0
+Grid Junction Separation over Octogon Radius At Middle (ratio):	0.0
+Infill Begin Rotation (degrees):	90.0
+Infill Begin Rotation Repeat (layers):	1
+Infill Interior Density over Exterior Density (ratio):	0.9
+Infill Odd Layer Extra Rotation (degrees):	90.0
+Grid Circular	False
+Grid Hexagonal	True
+Grid Rectangular	False
+Line	False
+Infill Perimeter Overlap (ratio):	0.35
+Infill Solidity (ratio):	0.25
+Infill Width over Thickness (ratio):	1.5
+Solid Surface Thickness (layers):	2
+Infill > Loops > Perimeter	False
+Infill > Perimeter > Loops	False
+Loops > Infill > Perimeter	False
+Loops > Perimeter > Infill	True
+Perimeter > Infill > Loops	False
+Perimeter > Loops > Infill	False
diff --git a/profiles/extrusion/ABS/fillet.csv b/profiles/extrusion/ABS/fillet.csv
new file mode 100644
index 0000000..61e1043
--- /dev/null
+++ b/profiles/extrusion/ABS/fillet.csv
@@ -0,0 +1,13 @@
+Format is tab separated fillet settings.
+Name                          	Value
+WindowPosition	700+0
+Open File to be Filleted	
+Activate Fillet	False
+Arc Point	False
+Arc Radius	False
+Arc Segment	False
+Bevel	True
+Corner Feed Rate over Operating Feed Rate (ratio):	1.0
+Fillet Radius over Perimeter Width (ratio):	0.35
+Reversal Slowdown Distance over Perimeter Width (ratio):	0.5
+Use Intermediate Feed Rate in Corners	True
diff --git a/profiles/extrusion/ABS/hop.csv b/profiles/extrusion/ABS/hop.csv
new file mode 100644
index 0000000..6d2853f
--- /dev/null
+++ b/profiles/extrusion/ABS/hop.csv
@@ -0,0 +1,7 @@
+Format is tab separated hop settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Hop	
+Activate Hop	False
+Hop Over Layer Thickness (ratio):	1.0
+Minimum Hop Angle (degrees):	30.0
diff --git a/profiles/extrusion/ABS/inset.csv b/profiles/extrusion/ABS/inset.csv
new file mode 100644
index 0000000..49199e6
--- /dev/null
+++ b/profiles/extrusion/ABS/inset.csv
@@ -0,0 +1,10 @@
+Format is tab separated inset settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Inset	
+Add Custom Code for Temperature Reading	True
+Bridge Width Multiplier (ratio):	1.0
+Ascending Area	True
+Descending Area	False
+Overlap Removal Width over Perimeter Width (ratio):	0.8
+Turn Extruder Heater Off at Shut Down	True
diff --git a/profiles/extrusion/ABS/jitter.csv b/profiles/extrusion/ABS/jitter.csv
new file mode 100644
index 0000000..09edfb6
--- /dev/null
+++ b/profiles/extrusion/ABS/jitter.csv
@@ -0,0 +1,6 @@
+Format is tab separated jitter settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Jitter	
+Activate Jitter	False
+Jitter Over Perimeter Width (ratio):	2.0
diff --git a/profiles/extrusion/ABS/limit.csv b/profiles/extrusion/ABS/limit.csv
new file mode 100644
index 0000000..353e5c1
--- /dev/null
+++ b/profiles/extrusion/ABS/limit.csv
@@ -0,0 +1,7 @@
+Format is tab separated limit settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Limit	
+Activate Limit	False
+Maximum Initial Feed Rate (mm/s):	1.0
+Maximum Z Feed Rate (mm/s):	8.0
diff --git a/profiles/extrusion/ABS/multiply.csv b/profiles/extrusion/ABS/multiply.csv
new file mode 100644
index 0000000..7f9d9db
--- /dev/null
+++ b/profiles/extrusion/ABS/multiply.csv
@@ -0,0 +1,10 @@
+Format is tab separated multiply settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Multiply	
+Activate Multiply:	False
+Center X (mm):	0.0
+Center Y (mm):	0.0
+Number of Columns (integer):	1
+Number of Rows (integer):	1
+Separation over Perimeter Width (ratio):	15.0
diff --git a/profiles/extrusion/ABS/oozebane.csv b/profiles/extrusion/ABS/oozebane.csv
new file mode 100644
index 0000000..c3fddfa
--- /dev/null
+++ b/profiles/extrusion/ABS/oozebane.csv
@@ -0,0 +1,13 @@
+Format is tab separated oozebane settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Oozebane	
+Activate Oozebane	False
+After Startup Distance (millimeters):	1.2
+Early Shutdown Distance (millimeters):	1.2
+Early Startup Distance Constant (millimeters):	20.0
+Early Startup Maximum Distance (millimeters):	1.2
+First Early Startup Distance (millimeters):	25.0
+Minimum Distance for Early Startup (millimeters):	0.0
+Minimum Distance for Early Shutdown (millimeters):	0.0
+Slowdown Startup Steps (positive integer):	3
diff --git a/profiles/extrusion/ABS/preface.csv b/profiles/extrusion/ABS/preface.csv
new file mode 100644
index 0000000..2d89dd0
--- /dev/null
+++ b/profiles/extrusion/ABS/preface.csv
@@ -0,0 +1,12 @@
+Format is tab separated preface settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Preface	
+Meta:	
+Name of End File:	end.gcode
+Name of Start File:	start.gcode
+Set Positioning to Absolute	False
+Set Units to Millimeters	False
+Start at Home	False
+Turn Extruder Off at Shut Down	False
+Turn Extruder Off at Start Up	False
diff --git a/profiles/extrusion/ABS/raft.csv b/profiles/extrusion/ABS/raft.csv
new file mode 100644
index 0000000..ab0a273
--- /dev/null
+++ b/profiles/extrusion/ABS/raft.csv
@@ -0,0 +1,34 @@
+Format is tab separated raft settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Raft	
+Activate Raft	True
+Add Raft, Elevate Nozzle, Orbit and Set Altitude:	True
+Base Feed Rate Multiplier (ratio):	0.6
+Base Flow Rate Multiplier (ratio):	1.0
+Base Infill Density (ratio):	0.5
+Base Layer Thickness over Layer Thickness:	2.0
+Base Layers (integer):	1
+Base Nozzle Lift over Base Layer Thickness (ratio):	0.8
+Initial Circling:	False
+Infill Overhang over Extrusion Width (ratio):	0.05
+Interface Feed Rate Multiplier (ratio):	1.4
+Interface Flow Rate Multiplier (ratio):	1.0
+Interface Infill Density (ratio):	0.65
+Interface Layer Thickness over Layer Thickness:	1.2
+Interface Layers (integer):	1
+Interface Nozzle Lift over Interface Layer Thickness (ratio):	0.2
+Object First Layer Feed Rate Infill Multiplier (ratio):	0.65
+Object First Layer Feed Rate Perimeter Multiplier (ratio):	0.75
+Object First Layer Flow Rate Multiplier (ratio):	1.0
+Operating Nozzle Lift over Layer Thickness (ratio):	1.2
+Raft Additional Margin over Length (%):	1.3
+Raft Margin (mm):	5.0
+Support Cross Hatch	False
+Support Flow Rate over Operating Flow Rate (ratio):	1.0
+Support Gap over Perimeter Extrusion Width (ratio):	6.0
+None	False
+Empty Layers Only	False
+Everywhere	False
+Exterior Only	True
+Support Minimum Angle (degrees):	46.0
diff --git a/profiles/extrusion/ABS/speed.csv b/profiles/extrusion/ABS/speed.csv
new file mode 100644
index 0000000..bb1535b
--- /dev/null
+++ b/profiles/extrusion/ABS/speed.csv
@@ -0,0 +1,16 @@
+Format is tab separated speed settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Speed	
+Activate Speed:	True
+Add Flow Rate:	True
+Bridge Feed Rate Multiplier (ratio):	1.0
+Bridge Flow Rate Multiplier (ratio):	1.0
+Duty Cyle at Beginning (portion):	1.0
+Duty Cyle at Ending (portion):	0.0
+Feed Rate (mm/s):	32.0
+Flow Rate Setting (float):	255.0
+Orbital Feed Rate over Operating Feed Rate (ratio):	0.5
+Perimeter Feed Rate over Operating Feed Rate (ratio):	1.0
+Perimeter Flow Rate over Operating Flow Rate (ratio):	1.0
+Travel Feed Rate (mm/s):	32.0
diff --git a/profiles/extrusion/ABS/splodge.csv b/profiles/extrusion/ABS/splodge.csv
new file mode 100644
index 0000000..b02dc16
--- /dev/null
+++ b/profiles/extrusion/ABS/splodge.csv
@@ -0,0 +1,11 @@
+Format is tab separated splodge settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Splodge	
+Activate Splodge	False
+Initial Lift over Extra Thickness (ratio):	1.0
+Initial Splodge Feed Rate (mm/s):	1.0
+Initial Splodge Quantity Length (millimeters):	30.0
+Operating Lift over Extra Thickness (ratio):	1.0
+Operating Splodge Feed Rate (mm/s):	1.0
+Operating Splodge Quantity Length (millimeters):	1.0
diff --git a/profiles/extrusion/ABS/stretch.csv b/profiles/extrusion/ABS/stretch.csv
new file mode 100644
index 0000000..594daae
--- /dev/null
+++ b/profiles/extrusion/ABS/stretch.csv
@@ -0,0 +1,11 @@
+Format is tab separated stretch settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Stretch	
+Activate Stretch	False
+Cross Limit Distance Over Perimeter Width (ratio):	5.0
+Loop Stretch Over Perimeter Width (ratio):	0.11
+Path Stretch Over Perimeter Width (ratio):	0.0
+Perimeter Inside Stretch Over Perimeter Width (ratio):	0.32
+Perimeter Outside Stretch Over Perimeter Width (ratio):	0.1
+Stretch From Distance Over Perimeter Width (ratio):	2.0
diff --git a/profiles/extrusion/ABS/temperature.csv b/profiles/extrusion/ABS/temperature.csv
new file mode 100644
index 0000000..14f8006
--- /dev/null
+++ b/profiles/extrusion/ABS/temperature.csv
@@ -0,0 +1,14 @@
+Format is tab separated temperature settings.
+Name                          	Value
+WindowPosition	600+0
+Open File for Temperature	
+Activate Temperature:	True
+Cooling Rate (Celcius/second):	3.0
+Heating Rate (Celcius/second):	10.0
+Base Temperature (Celcius):	225.0
+Interface Temperature (Celcius):	225.0
+Object First Layer Infill Temperature (Celcius):	225.0
+Object First Layer Perimeter Temperature (Celcius):	225.0
+Object Next Layers Temperature (Celcius):	225.0
+Support Layers Temperature (Celcius):	225.0
+Supported Layers Temperature (Celcius):	225.0
diff --git a/profiles/extrusion/ABS/tower.csv b/profiles/extrusion/ABS/tower.csv
new file mode 100644
index 0000000..307f220
--- /dev/null
+++ b/profiles/extrusion/ABS/tower.csv
@@ -0,0 +1,8 @@
+Format is tab separated tower settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Tower	
+Activate Tower	False
+Extruder Possible Collision Cone Angle (degrees):	60.0
+Maximum Tower Height (layers):	5
+Tower Start Layer (integer):	5
diff --git a/profiles/extrusion/ABS/vectorwrite.csv b/profiles/extrusion/ABS/vectorwrite.csv
new file mode 100644
index 0000000..ac6e12f
--- /dev/null
+++ b/profiles/extrusion/ABS/vectorwrite.csv
@@ -0,0 +1,8 @@
+Format is tab separated vectorwrite settings.
+Name                          	Value
+WindowPosition	700+0
+Activate Vectorwrite	False
+Open File to Write Vector Graphics for	
+Layers From (index):	0
+Layers To (index):	912345678
+SVG Viewer:	webbrowser
diff --git a/profiles/extrusion/ABS/widen.csv b/profiles/extrusion/ABS/widen.csv
new file mode 100644
index 0000000..2acc295
--- /dev/null
+++ b/profiles/extrusion/ABS/widen.csv
@@ -0,0 +1,5 @@
+Format is tab separated widen settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Widen	
+Activate Widen:	False
diff --git a/profiles/extrusion/ABS/wipe.csv b/profiles/extrusion/ABS/wipe.csv
new file mode 100644
index 0000000..64a86d4
--- /dev/null
+++ b/profiles/extrusion/ABS/wipe.csv
@@ -0,0 +1,15 @@
+Format is tab separated wipe settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Wipe	
+Activate Wipe	True
+Location Arrival X (mm):	52.0
+Location Arrival Y (mm):	-57.0
+Location Arrival Z (mm):	10.0
+Location Departure X (mm):	52.0
+Location Departure Y (mm):	-30.0
+Location Departure Z (mm):	10.0
+Location Wipe X (mm):	52.0
+Location Wipe Y (mm):	-55.0
+Location Wipe Z (mm):	10.0
+Wipe Period (layers):	99999999
diff --git a/profiles/home.csv b/profiles/home.csv
new file mode 100644
index 0000000..0b37e04
--- /dev/null
+++ b/profiles/home.csv
@@ -0,0 +1,6 @@
+Format is tab separated home settings.
+Name                          	Value
+WindowPosition	0+0
+Open File for Home	
+Activate Home	False
+Name of Homing File:	homing.gcode
diff --git a/profiles/interpret.csv b/profiles/interpret.csv
new file mode 100644
index 0000000..4fe641d
--- /dev/null
+++ b/profiles/interpret.csv
@@ -0,0 +1,7 @@
+Format is tab separated interpret settings.
+Name                          	Value
+WindowPosition	0+0
+Open File for Interpret	
+Activate Interpret	False
+Print Interpretion	False
+Text Program:	webbrowser
diff --git a/profiles/lash.csv b/profiles/lash.csv
new file mode 100644
index 0000000..cc36337
--- /dev/null
+++ b/profiles/lash.csv
@@ -0,0 +1,7 @@
+Format is tab separated lash settings.
+Name                          	Value
+WindowPosition	0+0
+Open File for Lash	
+Activate Lash	False
+X Backlash (mm):	0.2
+Y Backlash (mm):	0.3
diff --git a/profiles/milling.csv b/profiles/milling.csv
new file mode 100644
index 0000000..051a168
--- /dev/null
+++ b/profiles/milling.csv
@@ -0,0 +1,4 @@
+Format is tab separated milling settings.
+Name                          	Value
+WindowPosition	0+400
+Profile Selection:	end_mill
diff --git a/profiles/polyfile.csv b/profiles/polyfile.csv
new file mode 100644
index 0000000..d0ee17c
--- /dev/null
+++ b/profiles/polyfile.csv
@@ -0,0 +1,5 @@
+Format is tab separated polyfile settings.
+Name                          	Value
+WindowPosition	0+0
+Execute All Unmodified Files in a Directory	False
+Execute File	True
diff --git a/profiles/skeinforge.csv b/profiles/skeinforge.csv
new file mode 100644
index 0000000..7126aa9
--- /dev/null
+++ b/profiles/skeinforge.csv
@@ -0,0 +1,9 @@
+Format is tab separated skeinforge settings.
+Name                          	Value
+WindowPosition	698+25
+Open File for Skeinforge	
+analyze	False
+craft	True
+help	False
+meta	False
+profile	False
diff --git a/profiles/skeinforge_analyze.csv b/profiles/skeinforge_analyze.csv
new file mode 100644
index 0000000..23fecbc
--- /dev/null
+++ b/profiles/skeinforge_analyze.csv
@@ -0,0 +1,10 @@
+Format is tab separated skeinforge analyze settings.
+Name                          	Value
+WindowPosition	0+0
+Open File for Analyze	
+comment	False
+interpret	True
+skeiniso	False
+skeinlayer	False
+statistic	False
+vectorwrite	False
diff --git a/profiles/skeinforge_craft.csv b/profiles/skeinforge_craft.csv
new file mode 100644
index 0000000..a262589
--- /dev/null
+++ b/profiles/skeinforge_craft.csv
@@ -0,0 +1,44 @@
+Format is tab separated skeinforge craft settings.
+Name                          	Value
+WindowPosition	0+0
+Open File for Craft	
+bottom	False
+carve	True
+chamber	False
+chop	False
+cleave	False
+clip	False
+coil	False
+comb	False
+cool	False
+dimension	False
+drill	False
+export	False
+feed	False
+fill	False
+fillet	False
+flow	False
+home	False
+hop	False
+inset	False
+jitter	False
+lash	False
+lift	False
+limit	False
+mill	False
+multiply	False
+oozebane	False
+outline	False
+outset	False
+preface	False
+raft	False
+raftless	False
+speed	False
+splodge	False
+stretch	False
+temperature	False
+tower	False
+unpause	False
+whittle	False
+widen	False
+wipe	False
diff --git a/profiles/skeinforge_help.csv b/profiles/skeinforge_help.csv
new file mode 100644
index 0000000..445ef97
--- /dev/null
+++ b/profiles/skeinforge_help.csv
@@ -0,0 +1,4 @@
+Format is tab separated skeinforge help settings.
+Name                          	Value
+WindowPosition	0+0
+Wiki Manual Primary	True
diff --git a/profiles/skeinforge_meta.csv b/profiles/skeinforge_meta.csv
new file mode 100644
index 0000000..72e048b
--- /dev/null
+++ b/profiles/skeinforge_meta.csv
@@ -0,0 +1,5 @@
+Format is tab separated skeinforge meta settings.
+Name                          	Value
+WindowPosition	0+0
+description	False
+polyfile	True
diff --git a/profiles/skeinforge_profile.csv b/profiles/skeinforge_profile.csv
new file mode 100644
index 0000000..1d60c1b
--- /dev/null
+++ b/profiles/skeinforge_profile.csv
@@ -0,0 +1,7 @@
+Format is tab separated skeinforge profile settings.
+Name                          	Value
+WindowPosition	0+200
+cutting	False
+extrusion	True
+milling	False
+winding	False
diff --git a/profiles/skeiniso.csv b/profiles/skeiniso.csv
new file mode 100644
index 0000000..8cc481d
--- /dev/null
+++ b/profiles/skeiniso.csv
@@ -0,0 +1,40 @@
+Format is tab separated skeiniso settings.
+Name                          	Value
+WindowPosition	0+0
+Open File for Skeiniso	
+Activate Skeiniso	False
+Frame List
+Animation Line Quickening (ratio):	1.0
+Animation Slide Show Rate (layers/second):	2.0
+Axis Rulings	True
+Band Height (layers):	5
+Bottom Band Brightness (ratio):	0.7
+Bottom Layer Brightness (ratio):	1.0
+From the Bottom	False
+From the Top	True
+Draw Arrows	False
+Go Around Extruder Off Travel	False
+Layer (index):	0
+Layer Extra Span (integer):	912345678
+Line (index):	0
+Display Line	True
+View Move	False
+View Rotate	False
+Number of Fill Bottom Layers (integer):	1
+Number of Fill Top Layers (integer):	1
+Scale (pixels per millimeter):	15.0
+Screen Horizontal Inset (pixels):	100
+Screen Vertical Inset (pixels):	220
+Viewpoint Latitude (degrees):	15.0
+Viewpoint Longitude (degrees):	210.0
+Width of Axis Negative Side (pixels):	2
+Width of Axis Positive Side (pixels):	6
+Width of Fill Bottom Thread (pixels):	2
+Width of Fill Top Thread (pixels):	2
+Width of Infill Thread (pixels):	1
+Width of Loop Thread (pixels):	2
+Width of Perimeter Inside Thread (pixels):	8
+Width of Perimeter Outside Thread (pixels):	8
+Width of Raft Thread (pixels):	1
+Width of Selection Thread (pixels):	6
+Width of Travel Thread (pixels):	0
diff --git a/profiles/skeinlayer.csv b/profiles/skeinlayer.csv
new file mode 100644
index 0000000..fbe43c9
--- /dev/null
+++ b/profiles/skeinlayer.csv
@@ -0,0 +1,22 @@
+Format is tab separated skeinlayer settings.
+Name                          	Value
+WindowPosition	0+0
+Open File for Skeinlayer	
+Activate Skeinlayer	False
+Frame List
+Animation Line Quickening (ratio):	1.0
+Animation Slide Show Rate (layers/second):	2.0
+Draw Arrows	True
+Go Around Extruder Off Travel	False
+Layer (index):	15
+Layer Extra Span (integer):	0
+Line (index):	0
+Display Line	True
+View Move	False
+Numeric Pointer	True
+Scale (pixels per millimeter):	15.0
+Screen Horizontal Inset (pixels):	100
+Screen Vertical Inset (pixels):	220
+Width of Extrusion Thread (pixels):	3
+Width of Selection Thread (pixels):	6
+Width of Travel Thread (pixels):	1
diff --git a/profiles/statistic.csv b/profiles/statistic.csv
new file mode 100644
index 0000000..871b987
--- /dev/null
+++ b/profiles/statistic.csv
@@ -0,0 +1,11 @@
+Format is tab separated statistic settings.
+Name                          	Value
+WindowPosition	0+0
+Activate Statistic	True
+Machine Time ($/hour):	1.0
+Material ($/kg):	10.0
+Density (kg/m3):	930.0
+Extrusion Diameter over Thickness (ratio):	1.25
+Open File to Generate Statistics for	
+Print Statistics	True
+Save Statistics	False
diff --git a/profiles/unpause.csv b/profiles/unpause.csv
new file mode 100644
index 0000000..5ab9392
--- /dev/null
+++ b/profiles/unpause.csv
@@ -0,0 +1,7 @@
+Format is tab separated unpause settings.
+Name                          	Value
+WindowPosition	0+0
+Open File for Unpause	
+Activate Unpause	False
+Delay (milliseconds):	28.0
+Maximum Speed (ratio):	1.3
diff --git a/profiles/winding.csv b/profiles/winding.csv
new file mode 100644
index 0000000..0b65a9f
--- /dev/null
+++ b/profiles/winding.csv
@@ -0,0 +1,4 @@
+Format is tab separated winding settings.
+Name                          	Value
+WindowPosition	0+400
+Profile Selection:	free_wire