diff options
Diffstat (limited to 'profiles/extrusion')
26 files changed, 312 insertions, 0 deletions
diff --git a/profiles/extrusion/ABS/bottom.csv b/profiles/extrusion/ABS/bottom.csv new file mode 100644 index 0000000..f7ced9a --- /dev/null +++ b/profiles/extrusion/ABS/bottom.csv @@ -0,0 +1,7 @@ +Format is tab separated bottom settings. +Name Value +WindowPosition 700+0 +Open File for Bottom +Activate Bottom: True +Altitude (mm): 0.3 +SVG Viewer: webbrowser diff --git a/profiles/extrusion/ABS/carve.csv b/profiles/extrusion/ABS/carve.csv new file mode 100644 index 0000000..f3a0517 --- /dev/null +++ b/profiles/extrusion/ABS/carve.csv @@ -0,0 +1,16 @@ +Format is tab separated carve settings. +Name Value +WindowPosition 700+0 +Open File for Carve +Add Layer Template to SVG True +Bridge Thickness Multiplier (ratio): 1.0 +Extra Decimal Places (float): 1.0 +Import Coarseness (ratio): 1.0 +Infill in Direction of Bridges True +Layer Thickness (mm): 0.4 +Layers From (index): 0 +Layers To (index): 912345678 +Correct Mesh True +Unproven Mesh False +Perimeter Width over Thickness (ratio): 1.45 +SVG Viewer: webbrowser diff --git a/profiles/extrusion/ABS/chamber.csv b/profiles/extrusion/ABS/chamber.csv new file mode 100644 index 0000000..ce8dd85 --- /dev/null +++ b/profiles/extrusion/ABS/chamber.csv @@ -0,0 +1,8 @@ +Format is tab separated chamber settings. +Name Value +WindowPosition 700+0 +Open File for Chamber +Activate Chamber: False +Bed Temperature (Celcius): 60.0 +Chamber Temperature (Celcius): 30.0 +Holding Force (bar): 0.0 diff --git a/profiles/extrusion/ABS/clip.csv b/profiles/extrusion/ABS/clip.csv new file mode 100644 index 0000000..e14c474 --- /dev/null +++ b/profiles/extrusion/ABS/clip.csv @@ -0,0 +1,7 @@ +Format is tab separated clip settings. +Name Value +WindowPosition 700+0 +Open File for Clip +Activate Clip False +Clip Over Perimeter Width (ratio): 0.5 +Maximum Connection Distance Over Perimeter Width (ratio): 10.0 diff --git a/profiles/extrusion/ABS/comb.csv b/profiles/extrusion/ABS/comb.csv new file mode 100644 index 0000000..dc68f7d --- /dev/null +++ b/profiles/extrusion/ABS/comb.csv @@ -0,0 +1,5 @@ +Format is tab separated comb settings. +Name Value +WindowPosition 700+0 +Open File for Comb +Activate Comb True diff --git a/profiles/extrusion/ABS/cool.csv b/profiles/extrusion/ABS/cool.csv new file mode 100644 index 0000000..9c76d7d --- /dev/null +++ b/profiles/extrusion/ABS/cool.csv @@ -0,0 +1,12 @@ +Format is tab separated cool settings. +Name Value +WindowPosition 700+0 +Open File for Cool +Activate Cool False +Orbit True +Slow Down False +Maximum Cool (Celcius): 2.0 +Minimum Layer Time (seconds): 5.0 +Minimum Orbital Radius (millimeters): 10.0 +Turn Fan On at Beginning False +Turn Fan Off at Ending False diff --git a/profiles/extrusion/ABS/dimension.csv b/profiles/extrusion/ABS/dimension.csv new file mode 100644 index 0000000..e31ca32 --- /dev/null +++ b/profiles/extrusion/ABS/dimension.csv @@ -0,0 +1,10 @@ +Format is tab separated dimension settings. +Name Value +WindowPosition 700+0 +Open File for Dimension +Activate Dimension False +Absolute Extrusion Distance True +Relative Extrusion Distance False +Extruder Retraction Speed (mm/s): 13.3 +Retraction Distance (millimeters): 0.0 +Restart Extra Distance (millimeters): 0.0 diff --git a/profiles/extrusion/ABS/export.csv b/profiles/extrusion/ABS/export.csv new file mode 100644 index 0000000..4ec0003 --- /dev/null +++ b/profiles/extrusion/ABS/export.csv @@ -0,0 +1,14 @@ +Format is tab separated export settings. +Name Value +WindowPosition 700+0 +Open File for Export +Activate Export True +Also Send Output To: +Delete Comments False +Do Not Change Output True +binary_16_byte False +gcode_step False +gcode_time_segment False +gcode_small False +File Extension: gcode +Save Penultimate Gcode False diff --git a/profiles/extrusion/ABS/fill.csv b/profiles/extrusion/ABS/fill.csv new file mode 100644 index 0000000..d873ea5 --- /dev/null +++ b/profiles/extrusion/ABS/fill.csv @@ -0,0 +1,33 @@ +Format is tab separated fill settings. +Name Value +WindowPosition 700+0 +Open File for Fill +Activate Fill: True +Diaphragm Period (layers): 100 +Diaphragm Thickness (layers): 0 +Extra Shells on Alternating Solid Layer (layers): 2 +Extra Shells on Base (layers): 2 +Extra Shells on Sparse Layer (layers): 2 +Grid Circle Separation over Perimeter Width (ratio): 0.2 +Grid Extra Overlap (ratio): 0.1 +Grid Junction Separation Band Height (layers): 10 +Grid Junction Separation over Octogon Radius At End (ratio): 0.0 +Grid Junction Separation over Octogon Radius At Middle (ratio): 0.0 +Infill Begin Rotation (degrees): 90.0 +Infill Begin Rotation Repeat (layers): 1 +Infill Interior Density over Exterior Density (ratio): 0.9 +Infill Odd Layer Extra Rotation (degrees): 90.0 +Grid Circular False +Grid Hexagonal True +Grid Rectangular False +Line False +Infill Perimeter Overlap (ratio): 0.35 +Infill Solidity (ratio): 0.25 +Infill Width over Thickness (ratio): 1.5 +Solid Surface Thickness (layers): 2 +Infill > Loops > Perimeter False +Infill > Perimeter > Loops False +Loops > Infill > Perimeter False +Loops > Perimeter > Infill True +Perimeter > Infill > Loops False +Perimeter > Loops > Infill False diff --git a/profiles/extrusion/ABS/fillet.csv b/profiles/extrusion/ABS/fillet.csv new file mode 100644 index 0000000..61e1043 --- /dev/null +++ b/profiles/extrusion/ABS/fillet.csv @@ -0,0 +1,13 @@ +Format is tab separated fillet settings. +Name Value +WindowPosition 700+0 +Open File to be Filleted +Activate Fillet False +Arc Point False +Arc Radius False +Arc Segment False +Bevel True +Corner Feed Rate over Operating Feed Rate (ratio): 1.0 +Fillet Radius over Perimeter Width (ratio): 0.35 +Reversal Slowdown Distance over Perimeter Width (ratio): 0.5 +Use Intermediate Feed Rate in Corners True diff --git a/profiles/extrusion/ABS/hop.csv b/profiles/extrusion/ABS/hop.csv new file mode 100644 index 0000000..6d2853f --- /dev/null +++ b/profiles/extrusion/ABS/hop.csv @@ -0,0 +1,7 @@ +Format is tab separated hop settings. +Name Value +WindowPosition 700+0 +Open File for Hop +Activate Hop False +Hop Over Layer Thickness (ratio): 1.0 +Minimum Hop Angle (degrees): 30.0 diff --git a/profiles/extrusion/ABS/inset.csv b/profiles/extrusion/ABS/inset.csv new file mode 100644 index 0000000..49199e6 --- /dev/null +++ b/profiles/extrusion/ABS/inset.csv @@ -0,0 +1,10 @@ +Format is tab separated inset settings. +Name Value +WindowPosition 700+0 +Open File for Inset +Add Custom Code for Temperature Reading True +Bridge Width Multiplier (ratio): 1.0 +Ascending Area True +Descending Area False +Overlap Removal Width over Perimeter Width (ratio): 0.8 +Turn Extruder Heater Off at Shut Down True diff --git a/profiles/extrusion/ABS/jitter.csv b/profiles/extrusion/ABS/jitter.csv new file mode 100644 index 0000000..09edfb6 --- /dev/null +++ b/profiles/extrusion/ABS/jitter.csv @@ -0,0 +1,6 @@ +Format is tab separated jitter settings. +Name Value +WindowPosition 700+0 +Open File for Jitter +Activate Jitter False +Jitter Over Perimeter Width (ratio): 2.0 diff --git a/profiles/extrusion/ABS/limit.csv b/profiles/extrusion/ABS/limit.csv new file mode 100644 index 0000000..353e5c1 --- /dev/null +++ b/profiles/extrusion/ABS/limit.csv @@ -0,0 +1,7 @@ +Format is tab separated limit settings. +Name Value +WindowPosition 700+0 +Open File for Limit +Activate Limit False +Maximum Initial Feed Rate (mm/s): 1.0 +Maximum Z Feed Rate (mm/s): 8.0 diff --git a/profiles/extrusion/ABS/multiply.csv b/profiles/extrusion/ABS/multiply.csv new file mode 100644 index 0000000..7f9d9db --- /dev/null +++ b/profiles/extrusion/ABS/multiply.csv @@ -0,0 +1,10 @@ +Format is tab separated multiply settings. +Name Value +WindowPosition 700+0 +Open File for Multiply +Activate Multiply: False +Center X (mm): 0.0 +Center Y (mm): 0.0 +Number of Columns (integer): 1 +Number of Rows (integer): 1 +Separation over Perimeter Width (ratio): 15.0 diff --git a/profiles/extrusion/ABS/oozebane.csv b/profiles/extrusion/ABS/oozebane.csv new file mode 100644 index 0000000..c3fddfa --- /dev/null +++ b/profiles/extrusion/ABS/oozebane.csv @@ -0,0 +1,13 @@ +Format is tab separated oozebane settings. +Name Value +WindowPosition 700+0 +Open File for Oozebane +Activate Oozebane False +After Startup Distance (millimeters): 1.2 +Early Shutdown Distance (millimeters): 1.2 +Early Startup Distance Constant (millimeters): 20.0 +Early Startup Maximum Distance (millimeters): 1.2 +First Early Startup Distance (millimeters): 25.0 +Minimum Distance for Early Startup (millimeters): 0.0 +Minimum Distance for Early Shutdown (millimeters): 0.0 +Slowdown Startup Steps (positive integer): 3 diff --git a/profiles/extrusion/ABS/preface.csv b/profiles/extrusion/ABS/preface.csv new file mode 100644 index 0000000..2d89dd0 --- /dev/null +++ b/profiles/extrusion/ABS/preface.csv @@ -0,0 +1,12 @@ +Format is tab separated preface settings. +Name Value +WindowPosition 700+0 +Open File for Preface +Meta: +Name of End File: end.gcode +Name of Start File: start.gcode +Set Positioning to Absolute False +Set Units to Millimeters False +Start at Home False +Turn Extruder Off at Shut Down False +Turn Extruder Off at Start Up False diff --git a/profiles/extrusion/ABS/raft.csv b/profiles/extrusion/ABS/raft.csv new file mode 100644 index 0000000..ab0a273 --- /dev/null +++ b/profiles/extrusion/ABS/raft.csv @@ -0,0 +1,34 @@ +Format is tab separated raft settings. +Name Value +WindowPosition 700+0 +Open File for Raft +Activate Raft True +Add Raft, Elevate Nozzle, Orbit and Set Altitude: True +Base Feed Rate Multiplier (ratio): 0.6 +Base Flow Rate Multiplier (ratio): 1.0 +Base Infill Density (ratio): 0.5 +Base Layer Thickness over Layer Thickness: 2.0 +Base Layers (integer): 1 +Base Nozzle Lift over Base Layer Thickness (ratio): 0.8 +Initial Circling: False +Infill Overhang over Extrusion Width (ratio): 0.05 +Interface Feed Rate Multiplier (ratio): 1.4 +Interface Flow Rate Multiplier (ratio): 1.0 +Interface Infill Density (ratio): 0.65 +Interface Layer Thickness over Layer Thickness: 1.2 +Interface Layers (integer): 1 +Interface Nozzle Lift over Interface Layer Thickness (ratio): 0.2 +Object First Layer Feed Rate Infill Multiplier (ratio): 0.65 +Object First Layer Feed Rate Perimeter Multiplier (ratio): 0.75 +Object First Layer Flow Rate Multiplier (ratio): 1.0 +Operating Nozzle Lift over Layer Thickness (ratio): 1.2 +Raft Additional Margin over Length (%): 1.3 +Raft Margin (mm): 5.0 +Support Cross Hatch False +Support Flow Rate over Operating Flow Rate (ratio): 1.0 +Support Gap over Perimeter Extrusion Width (ratio): 6.0 +None False +Empty Layers Only False +Everywhere False +Exterior Only True +Support Minimum Angle (degrees): 46.0 diff --git a/profiles/extrusion/ABS/speed.csv b/profiles/extrusion/ABS/speed.csv new file mode 100644 index 0000000..bb1535b --- /dev/null +++ b/profiles/extrusion/ABS/speed.csv @@ -0,0 +1,16 @@ +Format is tab separated speed settings. +Name Value +WindowPosition 700+0 +Open File for Speed +Activate Speed: True +Add Flow Rate: True +Bridge Feed Rate Multiplier (ratio): 1.0 +Bridge Flow Rate Multiplier (ratio): 1.0 +Duty Cyle at Beginning (portion): 1.0 +Duty Cyle at Ending (portion): 0.0 +Feed Rate (mm/s): 32.0 +Flow Rate Setting (float): 255.0 +Orbital Feed Rate over Operating Feed Rate (ratio): 0.5 +Perimeter Feed Rate over Operating Feed Rate (ratio): 1.0 +Perimeter Flow Rate over Operating Flow Rate (ratio): 1.0 +Travel Feed Rate (mm/s): 32.0 diff --git a/profiles/extrusion/ABS/splodge.csv b/profiles/extrusion/ABS/splodge.csv new file mode 100644 index 0000000..b02dc16 --- /dev/null +++ b/profiles/extrusion/ABS/splodge.csv @@ -0,0 +1,11 @@ +Format is tab separated splodge settings. +Name Value +WindowPosition 700+0 +Open File for Splodge +Activate Splodge False +Initial Lift over Extra Thickness (ratio): 1.0 +Initial Splodge Feed Rate (mm/s): 1.0 +Initial Splodge Quantity Length (millimeters): 30.0 +Operating Lift over Extra Thickness (ratio): 1.0 +Operating Splodge Feed Rate (mm/s): 1.0 +Operating Splodge Quantity Length (millimeters): 1.0 diff --git a/profiles/extrusion/ABS/stretch.csv b/profiles/extrusion/ABS/stretch.csv new file mode 100644 index 0000000..594daae --- /dev/null +++ b/profiles/extrusion/ABS/stretch.csv @@ -0,0 +1,11 @@ +Format is tab separated stretch settings. +Name Value +WindowPosition 700+0 +Open File for Stretch +Activate Stretch False +Cross Limit Distance Over Perimeter Width (ratio): 5.0 +Loop Stretch Over Perimeter Width (ratio): 0.11 +Path Stretch Over Perimeter Width (ratio): 0.0 +Perimeter Inside Stretch Over Perimeter Width (ratio): 0.32 +Perimeter Outside Stretch Over Perimeter Width (ratio): 0.1 +Stretch From Distance Over Perimeter Width (ratio): 2.0 diff --git a/profiles/extrusion/ABS/temperature.csv b/profiles/extrusion/ABS/temperature.csv new file mode 100644 index 0000000..14f8006 --- /dev/null +++ b/profiles/extrusion/ABS/temperature.csv @@ -0,0 +1,14 @@ +Format is tab separated temperature settings. +Name Value +WindowPosition 600+0 +Open File for Temperature +Activate Temperature: True +Cooling Rate (Celcius/second): 3.0 +Heating Rate (Celcius/second): 10.0 +Base Temperature (Celcius): 225.0 +Interface Temperature (Celcius): 225.0 +Object First Layer Infill Temperature (Celcius): 225.0 +Object First Layer Perimeter Temperature (Celcius): 225.0 +Object Next Layers Temperature (Celcius): 225.0 +Support Layers Temperature (Celcius): 225.0 +Supported Layers Temperature (Celcius): 225.0 diff --git a/profiles/extrusion/ABS/tower.csv b/profiles/extrusion/ABS/tower.csv new file mode 100644 index 0000000..307f220 --- /dev/null +++ b/profiles/extrusion/ABS/tower.csv @@ -0,0 +1,8 @@ +Format is tab separated tower settings. +Name Value +WindowPosition 700+0 +Open File for Tower +Activate Tower False +Extruder Possible Collision Cone Angle (degrees): 60.0 +Maximum Tower Height (layers): 5 +Tower Start Layer (integer): 5 diff --git a/profiles/extrusion/ABS/vectorwrite.csv b/profiles/extrusion/ABS/vectorwrite.csv new file mode 100644 index 0000000..ac6e12f --- /dev/null +++ b/profiles/extrusion/ABS/vectorwrite.csv @@ -0,0 +1,8 @@ +Format is tab separated vectorwrite settings. +Name Value +WindowPosition 700+0 +Activate Vectorwrite False +Open File to Write Vector Graphics for +Layers From (index): 0 +Layers To (index): 912345678 +SVG Viewer: webbrowser diff --git a/profiles/extrusion/ABS/widen.csv b/profiles/extrusion/ABS/widen.csv new file mode 100644 index 0000000..2acc295 --- /dev/null +++ b/profiles/extrusion/ABS/widen.csv @@ -0,0 +1,5 @@ +Format is tab separated widen settings. +Name Value +WindowPosition 700+0 +Open File for Widen +Activate Widen: False diff --git a/profiles/extrusion/ABS/wipe.csv b/profiles/extrusion/ABS/wipe.csv new file mode 100644 index 0000000..64a86d4 --- /dev/null +++ b/profiles/extrusion/ABS/wipe.csv @@ -0,0 +1,15 @@ +Format is tab separated wipe settings. +Name Value +WindowPosition 700+0 +Open File for Wipe +Activate Wipe True +Location Arrival X (mm): 52.0 +Location Arrival Y (mm): -57.0 +Location Arrival Z (mm): 10.0 +Location Departure X (mm): 52.0 +Location Departure Y (mm): -30.0 +Location Departure Z (mm): 10.0 +Location Wipe X (mm): 52.0 +Location Wipe Y (mm): -55.0 +Location Wipe Z (mm): 10.0 +Wipe Period (layers): 99999999 |