diff options
Diffstat (limited to 'raft_ABS.csv')
| -rw-r--r-- | raft_ABS.csv | 33 |
1 files changed, 0 insertions, 33 deletions
diff --git a/raft_ABS.csv b/raft_ABS.csv deleted file mode 100644 index 7527b72..0000000 --- a/raft_ABS.csv +++ /dev/null @@ -1,33 +0,0 @@ -Format is tab separated preferences. -Activate Raft: True -Add Raft, Elevate Nozzle, Orbit and Set Altitude: True -Base Infill Density (ratio): 0.5 -Base Layer Thickness over Layer Thickness: 2.2 -Base Layers (integer): 1 -Base Nozzle Lift over Half Base Layer Thickness (ratio): 0.4 -Bottom Altitude: 0.1 -Open File to be Rafted -Infill Overhang (ratio): 0.1 -Interface Infill Density (ratio): 0.4 -Interface Layer Thickness over Layer Thickness: 1.4 -Interface Layers (integer): 3 -Interface Nozzle Lift over Half Interface Layer Thickness (ratio): 0.5 -Operating Nozzle Lift over Half Layer Thickness (ratio): 1.0 -Raft Outset Radius over Extrusion Width (ratio): 7.5 -Support Inset over Perimeter Extrusion Width (ratio): 0.0 -No Support Material True -Support Material Everywhere False -Support Material on Exterior Only False -Support Minimum Angle (degrees): 60.0 -Temperature Change Time Before Raft (seconds): 0.0 -Temperature Change Time Before First Layer Outline (seconds): 0.0 -Temperature Change Time Before Next Threads (seconds): 0.0 -Temperature Change Time Before Support Layers (seconds): 0.0 -Temperature Change Time Before Supported Layers (seconds): 0.0 -Temperature of Raft (Celcius): 230.0 -Temperature of Shape First Layer Outline (Celcius): 215.0 -Temperature of Shape First Layer Within (Celcius): 215.0 -Temperature of Shape Next Layers (Celcius): 220.0 -Temperature of Support Layers (Celcius): 220.0 -Temperature of Supported Layers (Celcius): 220.0 -windowPositionRaft Preferences 6+23 |