From 0613bb28883b72062adb38ac5dbde6dee7075c69 Mon Sep 17 00:00:00 2001 From: dakkar Date: Sat, 5 Feb 2011 11:11:46 +0000 Subject: SF35 initial profile --- alterations/end.gcode | 4 ++++ alterations/replace.csv | 1 + alterations/start.gcode | 18 ++++++++++++++ analyze.csv | 3 --- behold.csv | 32 ------------------------- carve.csv | 12 ---------- clip.csv | 5 ---- comb.csv | 7 ------ comment.csv | 4 ---- cool.csv | 7 ------ export.csv | 12 ---------- fill.csv | 22 ----------------- fillet.csv | 12 ---------- gcode_scripts/end.txt | 9 ------- gcode_scripts/start.txt | 20 ---------------- hop.csv | 6 ----- inset.csv | 8 ------- material.csv | 4 ---- multiply.csv | 9 ------- oozebane.csv | 12 ---------- polyfile.csv | 4 ---- profiles/comment.csv | 5 ++++ profiles/cutting.csv | 4 ++++ profiles/description.csv | 4 ++++ profiles/extrusion.csv | 4 ++++ profiles/extrusion/ABS/bottom.csv | 7 ++++++ profiles/extrusion/ABS/carve.csv | 16 +++++++++++++ profiles/extrusion/ABS/chamber.csv | 8 +++++++ profiles/extrusion/ABS/clip.csv | 7 ++++++ profiles/extrusion/ABS/comb.csv | 5 ++++ profiles/extrusion/ABS/cool.csv | 12 ++++++++++ profiles/extrusion/ABS/dimension.csv | 10 ++++++++ profiles/extrusion/ABS/export.csv | 14 +++++++++++ profiles/extrusion/ABS/fill.csv | 33 +++++++++++++++++++++++++ profiles/extrusion/ABS/fillet.csv | 13 ++++++++++ profiles/extrusion/ABS/hop.csv | 7 ++++++ profiles/extrusion/ABS/inset.csv | 10 ++++++++ profiles/extrusion/ABS/jitter.csv | 6 +++++ profiles/extrusion/ABS/limit.csv | 7 ++++++ profiles/extrusion/ABS/multiply.csv | 10 ++++++++ profiles/extrusion/ABS/oozebane.csv | 13 ++++++++++ profiles/extrusion/ABS/preface.csv | 12 ++++++++++ profiles/extrusion/ABS/raft.csv | 34 ++++++++++++++++++++++++++ profiles/extrusion/ABS/speed.csv | 16 +++++++++++++ profiles/extrusion/ABS/splodge.csv | 11 +++++++++ profiles/extrusion/ABS/stretch.csv | 11 +++++++++ profiles/extrusion/ABS/temperature.csv | 14 +++++++++++ profiles/extrusion/ABS/tower.csv | 8 +++++++ profiles/extrusion/ABS/vectorwrite.csv | 8 +++++++ profiles/extrusion/ABS/widen.csv | 5 ++++ profiles/extrusion/ABS/wipe.csv | 15 ++++++++++++ profiles/home.csv | 6 +++++ profiles/interpret.csv | 7 ++++++ profiles/lash.csv | 7 ++++++ profiles/milling.csv | 4 ++++ profiles/polyfile.csv | 5 ++++ profiles/skeinforge.csv | 9 +++++++ profiles/skeinforge_analyze.csv | 10 ++++++++ profiles/skeinforge_craft.csv | 44 ++++++++++++++++++++++++++++++++++ profiles/skeinforge_help.csv | 4 ++++ profiles/skeinforge_meta.csv | 5 ++++ profiles/skeinforge_profile.csv | 7 ++++++ profiles/skeiniso.csv | 40 +++++++++++++++++++++++++++++++ profiles/skeinlayer.csv | 22 +++++++++++++++++ profiles/statistic.csv | 11 +++++++++ profiles/unpause.csv | 7 ++++++ profiles/winding.csv | 4 ++++ raft_ABS.csv | 33 ------------------------- skeinforge.csv | 3 --- skeinview.csv | 9 ------- speed.csv | 16 ------------- statistic.csv | 6 ----- stretch.csv | 8 ------- tower.csv | 7 ------ unpause.csv | 6 ----- vectorwrite.csv | 6 ----- wipe.csv | 14 ----------- 77 files changed, 544 insertions(+), 296 deletions(-) create mode 100644 alterations/end.gcode create mode 100644 alterations/replace.csv create mode 100644 alterations/start.gcode delete mode 100644 analyze.csv delete mode 100644 behold.csv delete mode 100644 carve.csv delete mode 100644 clip.csv delete mode 100644 comb.csv delete mode 100644 comment.csv delete mode 100644 cool.csv delete mode 100644 export.csv delete mode 100644 fill.csv delete mode 100644 fillet.csv delete mode 100644 gcode_scripts/end.txt delete mode 100644 gcode_scripts/start.txt delete mode 100644 hop.csv delete mode 100644 inset.csv delete mode 100644 material.csv delete mode 100644 multiply.csv delete mode 100644 oozebane.csv delete mode 100644 polyfile.csv create mode 100644 profiles/comment.csv create mode 100644 profiles/cutting.csv create mode 100644 profiles/description.csv create mode 100644 profiles/extrusion.csv create mode 100644 profiles/extrusion/ABS/bottom.csv create mode 100644 profiles/extrusion/ABS/carve.csv create mode 100644 profiles/extrusion/ABS/chamber.csv create mode 100644 profiles/extrusion/ABS/clip.csv create mode 100644 profiles/extrusion/ABS/comb.csv create mode 100644 profiles/extrusion/ABS/cool.csv create mode 100644 profiles/extrusion/ABS/dimension.csv create mode 100644 profiles/extrusion/ABS/export.csv create mode 100644 profiles/extrusion/ABS/fill.csv create mode 100644 profiles/extrusion/ABS/fillet.csv create mode 100644 profiles/extrusion/ABS/hop.csv create mode 100644 profiles/extrusion/ABS/inset.csv create mode 100644 profiles/extrusion/ABS/jitter.csv create mode 100644 profiles/extrusion/ABS/limit.csv create mode 100644 profiles/extrusion/ABS/multiply.csv create mode 100644 profiles/extrusion/ABS/oozebane.csv create mode 100644 profiles/extrusion/ABS/preface.csv create mode 100644 profiles/extrusion/ABS/raft.csv create mode 100644 profiles/extrusion/ABS/speed.csv create mode 100644 profiles/extrusion/ABS/splodge.csv create mode 100644 profiles/extrusion/ABS/stretch.csv create mode 100644 profiles/extrusion/ABS/temperature.csv create mode 100644 profiles/extrusion/ABS/tower.csv create mode 100644 profiles/extrusion/ABS/vectorwrite.csv create mode 100644 profiles/extrusion/ABS/widen.csv create mode 100644 profiles/extrusion/ABS/wipe.csv create mode 100644 profiles/home.csv create mode 100644 profiles/interpret.csv create mode 100644 profiles/lash.csv create mode 100644 profiles/milling.csv create mode 100644 profiles/polyfile.csv create mode 100644 profiles/skeinforge.csv create mode 100644 profiles/skeinforge_analyze.csv create mode 100644 profiles/skeinforge_craft.csv create mode 100644 profiles/skeinforge_help.csv create mode 100644 profiles/skeinforge_meta.csv create mode 100644 profiles/skeinforge_profile.csv create mode 100644 profiles/skeiniso.csv create mode 100644 profiles/skeinlayer.csv create mode 100644 profiles/statistic.csv create mode 100644 profiles/unpause.csv create mode 100644 profiles/winding.csv delete mode 100644 raft_ABS.csv delete mode 100644 skeinforge.csv delete mode 100644 skeinview.csv delete mode 100644 speed.csv delete mode 100644 statistic.csv delete mode 100644 stretch.csv delete mode 100644 tower.csv delete mode 100644 unpause.csv delete mode 100644 vectorwrite.csv delete mode 100644 wipe.csv diff --git a/alterations/end.gcode b/alterations/end.gcode new file mode 100644 index 0000000..3c6fdce --- /dev/null +++ b/alterations/end.gcode @@ -0,0 +1,4 @@ +(end of the file, cooldown routines) +M104 S0 +G91 +G1 Z10 diff --git a/alterations/replace.csv b/alterations/replace.csv new file mode 100644 index 0000000..79137d9 --- /dev/null +++ b/alterations/replace.csv @@ -0,0 +1 @@ +M113 ;M113 diff --git a/alterations/start.gcode b/alterations/start.gcode new file mode 100644 index 0000000..ba7bdda --- /dev/null +++ b/alterations/start.gcode @@ -0,0 +1,18 @@ +(Cupcake ABS default skeinforge profile) +(homing routing) +M104 S220 T0 (Temperature to 220 celsius) +M109 S120 T0 (set heated-build-platform temperature) +G21 (Metric FTW) +G90 (Absolute Positioning) +G92 X0 Y0 Z0 (You are now at 0,0,0) +(You have failed me for the last time, MakerBot) +G0 Z15 (Move up for test extrusion) +M108 S255 (Extruder speed = max) +M6 T0 (Wait for tool to heat up) +G04 P5000 (Wait 5 seconds) +M101 (Extruder on, forward) +G04 P5000 (Wait 5 seconds) +M103 (Extruder off) +M01 (The heater is warming up and will do a test extrusion. Click yes after you have cleared the nozzle of the extrusion.) +G0 Z0 (Go back to zero.) +(end of start.) diff --git a/analyze.csv b/analyze.csv deleted file mode 100644 index 3d6b1a7..0000000 --- a/analyze.csv +++ /dev/null @@ -1,3 +0,0 @@ -Format is tab separated preferences. -Open File to be Analyzed -windowPositionBehold Preferences 0+0 diff --git a/behold.csv b/behold.csv deleted file mode 100644 index 84de7f8..0000000 --- a/behold.csv +++ /dev/null @@ -1,32 +0,0 @@ -Format is tab separated preferences. -Activate Behold False -Band Height (layers): 5 -Bottom Band Brightness (ratio): 0.7 -Bottom Layer Brightness (ratio): 1.0 -From the Bottom False -From the Top True -Draw Arrows True -Open File to Behold -Go Around Extruder Off Travel False -Layers From (index): 0 -Layers To (index): 999999 -Number of Fill Bottom Layers (integer): 1 -Number of Fill Top Layers (integer): 1 -Pixels over Extrusion Width (ratio): 10.0 -Screen Horizontal Inset (pixels): 100 -Screen Vertical Inset (pixels): 50 -Viewpoint Latitude (degrees): 45.0 -Viewpoint Longitude (degrees): 210.0 -Width of Extrusion Thread (pixels): 1 -Width of Fill Bottom Thread (pixels): 3 -Width of Fill Top Thread (pixels): 3 -Width of Loop Thread (pixels): 3 -Width of Perimeter Inside Thread (pixels): 4 -Width of Perimeter Outside Thread (pixels): 4 -Width of Raft Thread (pixels): 1 -Width of Travel Thread (pixels): 0 -Width of X Axis (pixels): 5 -Width of Y Axis (pixels): 5 -Width of Z Axis (pixels): 5 -windowPositionBehold Dynamic Preferences 0+0 -windowPositionBehold Preferences 0+0 diff --git a/carve.csv b/carve.csv deleted file mode 100644 index f198a7f..0000000 --- a/carve.csv +++ /dev/null @@ -1,12 +0,0 @@ -Format is tab separated preferences. -Extrusion Width over Thickness (ratio): 1.8 -Open File to be Carved -Import Coarseness (ratio): 1.0 -Correct Mesh True -Unproven Mesh False -Infill Bridge Thickness over Layer Thickness (ratio): 1.0 -Infill Bridge Width over Extrusion Width (ratio): 1.0 -Infill in Direction of Bridges True -Layer Thickness (mm): 0.37 -Layer Thickness over Precision (ratio): 10.0 -windowPositionBehold Preferences 0+0 diff --git a/clip.csv b/clip.csv deleted file mode 100644 index 8019832..0000000 --- a/clip.csv +++ /dev/null @@ -1,5 +0,0 @@ -Format is tab separated preferences. -Activate Clip True -Clip Over Extrusion Width (ratio): 0.18 -Open File to be Clipped -windowPositionBehold Preferences 0+0 diff --git a/comb.csv b/comb.csv deleted file mode 100644 index b4d3214..0000000 --- a/comb.csv +++ /dev/null @@ -1,7 +0,0 @@ -Format is tab separated preferences. -Activate Comb True -Arrival Inset Follow Distance over Extrusion Width (ratio): 3.0 -Jitter Over Extrusion Width (ratio): 10.0 -Minimum Perimeter Departure Distance over Extrusion Width (ratio): 5.0 -Open File to be Combed -windowPositionBehold Preferences 0+0 diff --git a/comment.csv b/comment.csv deleted file mode 100644 index 0a2b5d2..0000000 --- a/comment.csv +++ /dev/null @@ -1,4 +0,0 @@ -Format is tab separated preferences. -Activate Comment False -Open File to Write Comments for -windowPositionBehold Preferences 0+0 diff --git a/cool.csv b/cool.csv deleted file mode 100644 index 3e4b33e..0000000 --- a/cool.csv +++ /dev/null @@ -1,7 +0,0 @@ -Format is tab separated preferences. -Activate Cool False -Open File to be Cooled -Minimum Layer Time (seconds): 60.0 -Turn Fan On at Beginning True -Turn Fan Off at Ending True -windowPositionBehold Preferences 0+0 diff --git a/export.csv b/export.csv deleted file mode 100644 index 0abbe57..0000000 --- a/export.csv +++ /dev/null @@ -1,12 +0,0 @@ -Format is tab separated preferences. -Activate Export True -Also Send Output To: -Delete Comments False -Delete M110 Gcode Line True -binary_16_byte False -Do Not Change Output True -gcode_small False -gcode_step False -File Extension: gcode -Open File to be Exported -windowPositionBehold Preferences 0+0 diff --git a/fill.csv b/fill.csv deleted file mode 100644 index 2235468..0000000 --- a/fill.csv +++ /dev/null @@ -1,22 +0,0 @@ -Format is tab separated preferences. -Diaphragm Period (layers): 999999 -Diaphragm Thickness (layers): 0 -Extra Shells on Alternating Solid Layer (layers): 1 -Extra Shells on Base (layers): 2 -Extra Shells on Sparse Layer (layers): 1 -Grid Extra Overlap (ratio): 0.005 -Grid Junction Separation Band Height (layers): 10 -Grid Junction Separation over Octogon Radius At End (ratio): 0.0 -Grid Junction Separation over Octogon Radius At Middle (ratio): 0.0 -Open File to be Filled -Infill Begin Rotation (degrees): 45.0 -Infill Begin Rotation Repeat (layers): 1 -Infill Solidity (ratio): 0.23 -Infill Odd Layer Extra Rotation (degrees): 90.0 -Grid Hexagonal True -Grid Rectangular False -Line False -Interior Infill Density over Exterior Density (ratio): 0.1 -Outside Extruded First True -Solid Surface Thickness (layers): 2 -windowPositionBehold Preferences 0+0 diff --git a/fillet.csv b/fillet.csv deleted file mode 100644 index eadb68e..0000000 --- a/fillet.csv +++ /dev/null @@ -1,12 +0,0 @@ -Format is tab separated preferences. -Activate Fillet True -Arc Point False -Arc Radius False -Arc Segment False -Bevel True -Corner Feedrate over Operating Feedrate (ratio): 1.0 -Fillet Radius over Extrusion Width (ratio): 0.35 -Open File to be Filleted -Reversal Slowdown Distance over Extrusion Width (ratio): 0.5 -Use Intermediate Feedrate in Corners False -windowPositionBehold Preferences 0+0 diff --git a/gcode_scripts/end.txt b/gcode_scripts/end.txt deleted file mode 100644 index c1c26a7..0000000 --- a/gcode_scripts/end.txt +++ /dev/null @@ -1,9 +0,0 @@ -(end of the file, cooldown routines) -M104 S0 T0 (temp zero) -M109 S0 T0 (platform off) -M106 (fan on) -G92 Z0 (zero our z axis - hack b/c skeinforge mangles gcodes in end.txt) -G1 Z10 (go up 10 b/c it was zeroed earlier.) -G1 X0 Y0 Z10 (go to 0,0,z) -M18 (turn off steppers.) - diff --git a/gcode_scripts/start.txt b/gcode_scripts/start.txt deleted file mode 100644 index 3ca7561..0000000 --- a/gcode_scripts/start.txt +++ /dev/null @@ -1,20 +0,0 @@ -(Cupcake ABS with heated build platform skeinforge profile) -(beginning of start.txt) -M104 S220 T0 (Extruder Temperature to 220 Celsius) -M109 S110 T0 (Heated Platform Temperature to 110 Celsius) -M107 (fan off) -G21 (Metric FTW) -G90 (Absolute Positioning) -G92 X0 Y0 Z0 (You are now at 0,0,0) -(You have failed me for the last time, MakerBot) -G0 Z15 (Move up for warmup) -M108 S255 (Extruder speed = max) -M6 T0 (Wait for tool to heat up) -G04 P5000 (Wait 5 seconds) -M101 (Extruder on, forward) -G04 P5000 (Wait 5 seconds) -M103 (Extruder off) -M01 (The heated build platform is heating up. Wait until after the lights have turned off for the first time, clear the test extrusion, and click yes.) -G0 Z0 (Go back to zero.) -(end of start.txt) - diff --git a/hop.csv b/hop.csv deleted file mode 100644 index 914f48b..0000000 --- a/hop.csv +++ /dev/null @@ -1,6 +0,0 @@ -Format is tab separated preferences. -Activate Hop False -Open File to be Hopped -Hop Over Layer Thickness (ratio): 1.0 -Minimum Hop Angle (degrees): 20.0 -windowPositionBehold Preferences 0+0 diff --git a/inset.csv b/inset.csv deleted file mode 100644 index bd56288..0000000 --- a/inset.csv +++ /dev/null @@ -1,8 +0,0 @@ -Format is tab separated preferences. -Extrusion Perimeter Width over Thickness (ratio): 1.583 -Open File to be Insetted -Infill Perimeter Overlap (ratio): 0.15 -Calculate Overlap from Perimeter and Infill True -Calculate Overlap from Perimeter Only False -Start at Home True -windowPositionBehold Preferences 0+0 diff --git a/material.csv b/material.csv deleted file mode 100644 index 2153ca3..0000000 --- a/material.csv +++ /dev/null @@ -1,4 +0,0 @@ -Format is tab separated preferences. -Material List: ABS HDPE PCL PLA -Material Selection: ABS -windowPositionBehold Preferences 0+0 diff --git a/multiply.csv b/multiply.csv deleted file mode 100644 index b8ae9d8..0000000 --- a/multiply.csv +++ /dev/null @@ -1,9 +0,0 @@ -Format is tab separated preferences. -Activate Multiply: True -Center X (millimeters): 0.0 -Center Y (millimeters): 0.0 -Open File to be Multiplied -Number of Columns (integer): 1 -Number of Rows (integer): 1 -Separation over Extrusion Width (ratio): 10.0 -windowPositionBehold Preferences 0+0 diff --git a/oozebane.csv b/oozebane.csv deleted file mode 100644 index 58e8702..0000000 --- a/oozebane.csv +++ /dev/null @@ -1,12 +0,0 @@ -Format is tab separated preferences. -Activate Oozebane True -After Startup Distance (millimeters): 0.275 -Early Shutdown Distance (millimeters): 0.3 -Early Startup Distance Constant (millimeters): 20.0 -Early Startup Maximum Distance (millimeters): 5.25 -First Early Startup Distance (millimeters): 20.0 -Open File to be Oozebaned -Minimum Distance for Early Startup (millimeters): 0.01 -Minimum Distance for Early Shutdown (millimeters): 1.0 -Slowdown Startup Steps (positive integer): 1 -windowPositionBehold Preferences 0+0 diff --git a/polyfile.csv b/polyfile.csv deleted file mode 100644 index ecb5dcc..0000000 --- a/polyfile.csv +++ /dev/null @@ -1,4 +0,0 @@ -Format is tab separated preferences. -Execute All Unmodified Files in a Directory False -Execute File True -windowPositionBehold Preferences 0+0 diff --git a/profiles/comment.csv b/profiles/comment.csv new file mode 100644 index 0000000..df35361 --- /dev/null +++ b/profiles/comment.csv @@ -0,0 +1,5 @@ +Format is tab separated comment settings. +Name Value +WindowPosition 0+0 +Activate Comment False +Open File to Write Comments for diff --git a/profiles/cutting.csv b/profiles/cutting.csv new file mode 100644 index 0000000..343333d --- /dev/null +++ b/profiles/cutting.csv @@ -0,0 +1,4 @@ +Format is tab separated cutting settings. +Name Value +WindowPosition 0+400 +Profile Selection: end_mill diff --git a/profiles/description.csv b/profiles/description.csv new file mode 100644 index 0000000..6eec4a6 --- /dev/null +++ b/profiles/description.csv @@ -0,0 +1,4 @@ +Format is tab separated description settings. +Name Value +WindowPosition 0+0 +Description Text: Write your description of the profile here.___replaced___newline___replaced___newlineSuggested format is a description, followed by a link to the profile post or web page. diff --git a/profiles/extrusion.csv b/profiles/extrusion.csv new file mode 100644 index 0000000..3db7596 --- /dev/null +++ b/profiles/extrusion.csv @@ -0,0 +1,4 @@ +Format is tab separated extrusion settings. +Name Value +WindowPosition 0+400 +Profile Selection: ABS diff --git a/profiles/extrusion/ABS/bottom.csv b/profiles/extrusion/ABS/bottom.csv new file mode 100644 index 0000000..f7ced9a --- /dev/null +++ b/profiles/extrusion/ABS/bottom.csv @@ -0,0 +1,7 @@ +Format is tab separated bottom settings. +Name Value +WindowPosition 700+0 +Open File for Bottom +Activate Bottom: True +Altitude (mm): 0.3 +SVG Viewer: webbrowser diff --git a/profiles/extrusion/ABS/carve.csv b/profiles/extrusion/ABS/carve.csv new file mode 100644 index 0000000..f3a0517 --- /dev/null +++ b/profiles/extrusion/ABS/carve.csv @@ -0,0 +1,16 @@ +Format is tab separated carve settings. +Name Value +WindowPosition 700+0 +Open File for Carve +Add Layer Template to SVG True +Bridge Thickness Multiplier (ratio): 1.0 +Extra Decimal Places (float): 1.0 +Import Coarseness (ratio): 1.0 +Infill in Direction of Bridges True +Layer Thickness (mm): 0.4 +Layers From (index): 0 +Layers To (index): 912345678 +Correct Mesh True +Unproven Mesh False +Perimeter Width over Thickness (ratio): 1.45 +SVG Viewer: webbrowser diff --git a/profiles/extrusion/ABS/chamber.csv b/profiles/extrusion/ABS/chamber.csv new file mode 100644 index 0000000..ce8dd85 --- /dev/null +++ b/profiles/extrusion/ABS/chamber.csv @@ -0,0 +1,8 @@ +Format is tab separated chamber settings. +Name Value +WindowPosition 700+0 +Open File for Chamber +Activate Chamber: False +Bed Temperature (Celcius): 60.0 +Chamber Temperature (Celcius): 30.0 +Holding Force (bar): 0.0 diff --git a/profiles/extrusion/ABS/clip.csv b/profiles/extrusion/ABS/clip.csv new file mode 100644 index 0000000..e14c474 --- /dev/null +++ b/profiles/extrusion/ABS/clip.csv @@ -0,0 +1,7 @@ +Format is tab separated clip settings. +Name Value +WindowPosition 700+0 +Open File for Clip +Activate Clip False +Clip Over Perimeter Width (ratio): 0.5 +Maximum Connection Distance Over Perimeter Width (ratio): 10.0 diff --git a/profiles/extrusion/ABS/comb.csv b/profiles/extrusion/ABS/comb.csv new file mode 100644 index 0000000..dc68f7d --- /dev/null +++ b/profiles/extrusion/ABS/comb.csv @@ -0,0 +1,5 @@ +Format is tab separated comb settings. +Name Value +WindowPosition 700+0 +Open File for Comb +Activate Comb True diff --git a/profiles/extrusion/ABS/cool.csv b/profiles/extrusion/ABS/cool.csv new file mode 100644 index 0000000..9c76d7d --- /dev/null +++ b/profiles/extrusion/ABS/cool.csv @@ -0,0 +1,12 @@ +Format is tab separated cool settings. +Name Value +WindowPosition 700+0 +Open File for Cool +Activate Cool False +Orbit True +Slow Down False +Maximum Cool (Celcius): 2.0 +Minimum Layer Time (seconds): 5.0 +Minimum Orbital Radius (millimeters): 10.0 +Turn Fan On at Beginning False +Turn Fan Off at Ending False diff --git a/profiles/extrusion/ABS/dimension.csv b/profiles/extrusion/ABS/dimension.csv new file mode 100644 index 0000000..e31ca32 --- /dev/null +++ b/profiles/extrusion/ABS/dimension.csv @@ -0,0 +1,10 @@ +Format is tab separated dimension settings. +Name Value +WindowPosition 700+0 +Open File for Dimension +Activate Dimension False +Absolute Extrusion Distance True +Relative Extrusion Distance False +Extruder Retraction Speed (mm/s): 13.3 +Retraction Distance (millimeters): 0.0 +Restart Extra Distance (millimeters): 0.0 diff --git a/profiles/extrusion/ABS/export.csv b/profiles/extrusion/ABS/export.csv new file mode 100644 index 0000000..4ec0003 --- /dev/null +++ b/profiles/extrusion/ABS/export.csv @@ -0,0 +1,14 @@ +Format is tab separated export settings. +Name Value +WindowPosition 700+0 +Open File for Export +Activate Export True +Also Send Output To: +Delete Comments False +Do Not Change Output True +binary_16_byte False +gcode_step False +gcode_time_segment False +gcode_small False +File Extension: gcode +Save Penultimate Gcode False diff --git a/profiles/extrusion/ABS/fill.csv b/profiles/extrusion/ABS/fill.csv new file mode 100644 index 0000000..d873ea5 --- /dev/null +++ b/profiles/extrusion/ABS/fill.csv @@ -0,0 +1,33 @@ +Format is tab separated fill settings. +Name Value +WindowPosition 700+0 +Open File for Fill +Activate Fill: True +Diaphragm Period (layers): 100 +Diaphragm Thickness (layers): 0 +Extra Shells on Alternating Solid Layer (layers): 2 +Extra Shells on Base (layers): 2 +Extra Shells on Sparse Layer (layers): 2 +Grid Circle Separation over Perimeter Width (ratio): 0.2 +Grid Extra Overlap (ratio): 0.1 +Grid Junction Separation Band Height (layers): 10 +Grid Junction Separation over Octogon Radius At End (ratio): 0.0 +Grid Junction Separation over Octogon Radius At Middle (ratio): 0.0 +Infill Begin Rotation (degrees): 90.0 +Infill Begin Rotation Repeat (layers): 1 +Infill Interior Density over Exterior Density (ratio): 0.9 +Infill Odd Layer Extra Rotation (degrees): 90.0 +Grid Circular False +Grid Hexagonal True +Grid Rectangular False +Line False +Infill Perimeter Overlap (ratio): 0.35 +Infill Solidity (ratio): 0.25 +Infill Width over Thickness (ratio): 1.5 +Solid Surface Thickness (layers): 2 +Infill > Loops > Perimeter False +Infill > Perimeter > Loops False +Loops > Infill > Perimeter False +Loops > Perimeter > Infill True +Perimeter > Infill > Loops False +Perimeter > Loops > Infill False diff --git a/profiles/extrusion/ABS/fillet.csv b/profiles/extrusion/ABS/fillet.csv new file mode 100644 index 0000000..61e1043 --- /dev/null +++ b/profiles/extrusion/ABS/fillet.csv @@ -0,0 +1,13 @@ +Format is tab separated fillet settings. +Name Value +WindowPosition 700+0 +Open File to be Filleted +Activate Fillet False +Arc Point False +Arc Radius False +Arc Segment False +Bevel True +Corner Feed Rate over Operating Feed Rate (ratio): 1.0 +Fillet Radius over Perimeter Width (ratio): 0.35 +Reversal Slowdown Distance over Perimeter Width (ratio): 0.5 +Use Intermediate Feed Rate in Corners True diff --git a/profiles/extrusion/ABS/hop.csv b/profiles/extrusion/ABS/hop.csv new file mode 100644 index 0000000..6d2853f --- /dev/null +++ b/profiles/extrusion/ABS/hop.csv @@ -0,0 +1,7 @@ +Format is tab separated hop settings. +Name Value +WindowPosition 700+0 +Open File for Hop +Activate Hop False +Hop Over Layer Thickness (ratio): 1.0 +Minimum Hop Angle (degrees): 30.0 diff --git a/profiles/extrusion/ABS/inset.csv b/profiles/extrusion/ABS/inset.csv new file mode 100644 index 0000000..49199e6 --- /dev/null +++ b/profiles/extrusion/ABS/inset.csv @@ -0,0 +1,10 @@ +Format is tab separated inset settings. +Name Value +WindowPosition 700+0 +Open File for Inset +Add Custom Code for Temperature Reading True +Bridge Width Multiplier (ratio): 1.0 +Ascending Area True +Descending Area False +Overlap Removal Width over Perimeter Width (ratio): 0.8 +Turn Extruder Heater Off at Shut Down True diff --git a/profiles/extrusion/ABS/jitter.csv b/profiles/extrusion/ABS/jitter.csv new file mode 100644 index 0000000..09edfb6 --- /dev/null +++ b/profiles/extrusion/ABS/jitter.csv @@ -0,0 +1,6 @@ +Format is tab separated jitter settings. +Name Value +WindowPosition 700+0 +Open File for Jitter +Activate Jitter False +Jitter Over Perimeter Width (ratio): 2.0 diff --git a/profiles/extrusion/ABS/limit.csv b/profiles/extrusion/ABS/limit.csv new file mode 100644 index 0000000..353e5c1 --- /dev/null +++ b/profiles/extrusion/ABS/limit.csv @@ -0,0 +1,7 @@ +Format is tab separated limit settings. +Name Value +WindowPosition 700+0 +Open File for Limit +Activate Limit False +Maximum Initial Feed Rate (mm/s): 1.0 +Maximum Z Feed Rate (mm/s): 8.0 diff --git a/profiles/extrusion/ABS/multiply.csv b/profiles/extrusion/ABS/multiply.csv new file mode 100644 index 0000000..7f9d9db --- /dev/null +++ b/profiles/extrusion/ABS/multiply.csv @@ -0,0 +1,10 @@ +Format is tab separated multiply settings. +Name Value +WindowPosition 700+0 +Open File for Multiply +Activate Multiply: False +Center X (mm): 0.0 +Center Y (mm): 0.0 +Number of Columns (integer): 1 +Number of Rows (integer): 1 +Separation over Perimeter Width (ratio): 15.0 diff --git a/profiles/extrusion/ABS/oozebane.csv b/profiles/extrusion/ABS/oozebane.csv new file mode 100644 index 0000000..c3fddfa --- /dev/null +++ b/profiles/extrusion/ABS/oozebane.csv @@ -0,0 +1,13 @@ +Format is tab separated oozebane settings. +Name Value +WindowPosition 700+0 +Open File for Oozebane +Activate Oozebane False +After Startup Distance (millimeters): 1.2 +Early Shutdown Distance (millimeters): 1.2 +Early Startup Distance Constant (millimeters): 20.0 +Early Startup Maximum Distance (millimeters): 1.2 +First Early Startup Distance (millimeters): 25.0 +Minimum Distance for Early Startup (millimeters): 0.0 +Minimum Distance for Early Shutdown (millimeters): 0.0 +Slowdown Startup Steps (positive integer): 3 diff --git a/profiles/extrusion/ABS/preface.csv b/profiles/extrusion/ABS/preface.csv new file mode 100644 index 0000000..2d89dd0 --- /dev/null +++ b/profiles/extrusion/ABS/preface.csv @@ -0,0 +1,12 @@ +Format is tab separated preface settings. +Name Value +WindowPosition 700+0 +Open File for Preface +Meta: +Name of End File: end.gcode +Name of Start File: start.gcode +Set Positioning to Absolute False +Set Units to Millimeters False +Start at Home False +Turn Extruder Off at Shut Down False +Turn Extruder Off at Start Up False diff --git a/profiles/extrusion/ABS/raft.csv b/profiles/extrusion/ABS/raft.csv new file mode 100644 index 0000000..ab0a273 --- /dev/null +++ b/profiles/extrusion/ABS/raft.csv @@ -0,0 +1,34 @@ +Format is tab separated raft settings. +Name Value +WindowPosition 700+0 +Open File for Raft +Activate Raft True +Add Raft, Elevate Nozzle, Orbit and Set Altitude: True +Base Feed Rate Multiplier (ratio): 0.6 +Base Flow Rate Multiplier (ratio): 1.0 +Base Infill Density (ratio): 0.5 +Base Layer Thickness over Layer Thickness: 2.0 +Base Layers (integer): 1 +Base Nozzle Lift over Base Layer Thickness (ratio): 0.8 +Initial Circling: False +Infill Overhang over Extrusion Width (ratio): 0.05 +Interface Feed Rate Multiplier (ratio): 1.4 +Interface Flow Rate Multiplier (ratio): 1.0 +Interface Infill Density (ratio): 0.65 +Interface Layer Thickness over Layer Thickness: 1.2 +Interface Layers (integer): 1 +Interface Nozzle Lift over Interface Layer Thickness (ratio): 0.2 +Object First Layer Feed Rate Infill Multiplier (ratio): 0.65 +Object First Layer Feed Rate Perimeter Multiplier (ratio): 0.75 +Object First Layer Flow Rate Multiplier (ratio): 1.0 +Operating Nozzle Lift over Layer Thickness (ratio): 1.2 +Raft Additional Margin over Length (%): 1.3 +Raft Margin (mm): 5.0 +Support Cross Hatch False +Support Flow Rate over Operating Flow Rate (ratio): 1.0 +Support Gap over Perimeter Extrusion Width (ratio): 6.0 +None False +Empty Layers Only False +Everywhere False +Exterior Only True +Support Minimum Angle (degrees): 46.0 diff --git a/profiles/extrusion/ABS/speed.csv b/profiles/extrusion/ABS/speed.csv new file mode 100644 index 0000000..bb1535b --- /dev/null +++ b/profiles/extrusion/ABS/speed.csv @@ -0,0 +1,16 @@ +Format is tab separated speed settings. +Name Value +WindowPosition 700+0 +Open File for Speed +Activate Speed: True +Add Flow Rate: True +Bridge Feed Rate Multiplier (ratio): 1.0 +Bridge Flow Rate Multiplier (ratio): 1.0 +Duty Cyle at Beginning (portion): 1.0 +Duty Cyle at Ending (portion): 0.0 +Feed Rate (mm/s): 32.0 +Flow Rate Setting (float): 255.0 +Orbital Feed Rate over Operating Feed Rate (ratio): 0.5 +Perimeter Feed Rate over Operating Feed Rate (ratio): 1.0 +Perimeter Flow Rate over Operating Flow Rate (ratio): 1.0 +Travel Feed Rate (mm/s): 32.0 diff --git a/profiles/extrusion/ABS/splodge.csv b/profiles/extrusion/ABS/splodge.csv new file mode 100644 index 0000000..b02dc16 --- /dev/null +++ b/profiles/extrusion/ABS/splodge.csv @@ -0,0 +1,11 @@ +Format is tab separated splodge settings. +Name Value +WindowPosition 700+0 +Open File for Splodge +Activate Splodge False +Initial Lift over Extra Thickness (ratio): 1.0 +Initial Splodge Feed Rate (mm/s): 1.0 +Initial Splodge Quantity Length (millimeters): 30.0 +Operating Lift over Extra Thickness (ratio): 1.0 +Operating Splodge Feed Rate (mm/s): 1.0 +Operating Splodge Quantity Length (millimeters): 1.0 diff --git a/profiles/extrusion/ABS/stretch.csv b/profiles/extrusion/ABS/stretch.csv new file mode 100644 index 0000000..594daae --- /dev/null +++ b/profiles/extrusion/ABS/stretch.csv @@ -0,0 +1,11 @@ +Format is tab separated stretch settings. +Name Value +WindowPosition 700+0 +Open File for Stretch +Activate Stretch False +Cross Limit Distance Over Perimeter Width (ratio): 5.0 +Loop Stretch Over Perimeter Width (ratio): 0.11 +Path Stretch Over Perimeter Width (ratio): 0.0 +Perimeter Inside Stretch Over Perimeter Width (ratio): 0.32 +Perimeter Outside Stretch Over Perimeter Width (ratio): 0.1 +Stretch From Distance Over Perimeter Width (ratio): 2.0 diff --git a/profiles/extrusion/ABS/temperature.csv b/profiles/extrusion/ABS/temperature.csv new file mode 100644 index 0000000..14f8006 --- /dev/null +++ b/profiles/extrusion/ABS/temperature.csv @@ -0,0 +1,14 @@ +Format is tab separated temperature settings. +Name Value +WindowPosition 600+0 +Open File for Temperature +Activate Temperature: True +Cooling Rate (Celcius/second): 3.0 +Heating Rate (Celcius/second): 10.0 +Base Temperature (Celcius): 225.0 +Interface Temperature (Celcius): 225.0 +Object First Layer Infill Temperature (Celcius): 225.0 +Object First Layer Perimeter Temperature (Celcius): 225.0 +Object Next Layers Temperature (Celcius): 225.0 +Support Layers Temperature (Celcius): 225.0 +Supported Layers Temperature (Celcius): 225.0 diff --git a/profiles/extrusion/ABS/tower.csv b/profiles/extrusion/ABS/tower.csv new file mode 100644 index 0000000..307f220 --- /dev/null +++ b/profiles/extrusion/ABS/tower.csv @@ -0,0 +1,8 @@ +Format is tab separated tower settings. +Name Value +WindowPosition 700+0 +Open File for Tower +Activate Tower False +Extruder Possible Collision Cone Angle (degrees): 60.0 +Maximum Tower Height (layers): 5 +Tower Start Layer (integer): 5 diff --git a/profiles/extrusion/ABS/vectorwrite.csv b/profiles/extrusion/ABS/vectorwrite.csv new file mode 100644 index 0000000..ac6e12f --- /dev/null +++ b/profiles/extrusion/ABS/vectorwrite.csv @@ -0,0 +1,8 @@ +Format is tab separated vectorwrite settings. +Name Value +WindowPosition 700+0 +Activate Vectorwrite False +Open File to Write Vector Graphics for +Layers From (index): 0 +Layers To (index): 912345678 +SVG Viewer: webbrowser diff --git a/profiles/extrusion/ABS/widen.csv b/profiles/extrusion/ABS/widen.csv new file mode 100644 index 0000000..2acc295 --- /dev/null +++ b/profiles/extrusion/ABS/widen.csv @@ -0,0 +1,5 @@ +Format is tab separated widen settings. +Name Value +WindowPosition 700+0 +Open File for Widen +Activate Widen: False diff --git a/profiles/extrusion/ABS/wipe.csv b/profiles/extrusion/ABS/wipe.csv new file mode 100644 index 0000000..64a86d4 --- /dev/null +++ b/profiles/extrusion/ABS/wipe.csv @@ -0,0 +1,15 @@ +Format is tab separated wipe settings. +Name Value +WindowPosition 700+0 +Open File for Wipe +Activate Wipe True +Location Arrival X (mm): 52.0 +Location Arrival Y (mm): -57.0 +Location Arrival Z (mm): 10.0 +Location Departure X (mm): 52.0 +Location Departure Y (mm): -30.0 +Location Departure Z (mm): 10.0 +Location Wipe X (mm): 52.0 +Location Wipe Y (mm): -55.0 +Location Wipe Z (mm): 10.0 +Wipe Period (layers): 99999999 diff --git a/profiles/home.csv b/profiles/home.csv new file mode 100644 index 0000000..0b37e04 --- /dev/null +++ b/profiles/home.csv @@ -0,0 +1,6 @@ +Format is tab separated home settings. +Name Value +WindowPosition 0+0 +Open File for Home +Activate Home False +Name of Homing File: homing.gcode diff --git a/profiles/interpret.csv b/profiles/interpret.csv new file mode 100644 index 0000000..4fe641d --- /dev/null +++ b/profiles/interpret.csv @@ -0,0 +1,7 @@ +Format is tab separated interpret settings. +Name Value +WindowPosition 0+0 +Open File for Interpret +Activate Interpret False +Print Interpretion False +Text Program: webbrowser diff --git a/profiles/lash.csv b/profiles/lash.csv new file mode 100644 index 0000000..cc36337 --- /dev/null +++ b/profiles/lash.csv @@ -0,0 +1,7 @@ +Format is tab separated lash settings. +Name Value +WindowPosition 0+0 +Open File for Lash +Activate Lash False +X Backlash (mm): 0.2 +Y Backlash (mm): 0.3 diff --git a/profiles/milling.csv b/profiles/milling.csv new file mode 100644 index 0000000..051a168 --- /dev/null +++ b/profiles/milling.csv @@ -0,0 +1,4 @@ +Format is tab separated milling settings. +Name Value +WindowPosition 0+400 +Profile Selection: end_mill diff --git a/profiles/polyfile.csv b/profiles/polyfile.csv new file mode 100644 index 0000000..d0ee17c --- /dev/null +++ b/profiles/polyfile.csv @@ -0,0 +1,5 @@ +Format is tab separated polyfile settings. +Name Value +WindowPosition 0+0 +Execute All Unmodified Files in a Directory False +Execute File True diff --git a/profiles/skeinforge.csv b/profiles/skeinforge.csv new file mode 100644 index 0000000..7126aa9 --- /dev/null +++ b/profiles/skeinforge.csv @@ -0,0 +1,9 @@ +Format is tab separated skeinforge settings. +Name Value +WindowPosition 698+25 +Open File for Skeinforge +analyze False +craft True +help False +meta False +profile False diff --git a/profiles/skeinforge_analyze.csv b/profiles/skeinforge_analyze.csv new file mode 100644 index 0000000..23fecbc --- /dev/null +++ b/profiles/skeinforge_analyze.csv @@ -0,0 +1,10 @@ +Format is tab separated skeinforge analyze settings. +Name Value +WindowPosition 0+0 +Open File for Analyze +comment False +interpret True +skeiniso False +skeinlayer False +statistic False +vectorwrite False diff --git a/profiles/skeinforge_craft.csv b/profiles/skeinforge_craft.csv new file mode 100644 index 0000000..a262589 --- /dev/null +++ b/profiles/skeinforge_craft.csv @@ -0,0 +1,44 @@ +Format is tab separated skeinforge craft settings. +Name Value +WindowPosition 0+0 +Open File for Craft +bottom False +carve True +chamber False +chop False +cleave False +clip False +coil False +comb False +cool False +dimension False +drill False +export False +feed False +fill False +fillet False +flow False +home False +hop False +inset False +jitter False +lash False +lift False +limit False +mill False +multiply False +oozebane False +outline False +outset False +preface False +raft False +raftless False +speed False +splodge False +stretch False +temperature False +tower False +unpause False +whittle False +widen False +wipe False diff --git a/profiles/skeinforge_help.csv b/profiles/skeinforge_help.csv new file mode 100644 index 0000000..445ef97 --- /dev/null +++ b/profiles/skeinforge_help.csv @@ -0,0 +1,4 @@ +Format is tab separated skeinforge help settings. +Name Value +WindowPosition 0+0 +Wiki Manual Primary True diff --git a/profiles/skeinforge_meta.csv b/profiles/skeinforge_meta.csv new file mode 100644 index 0000000..72e048b --- /dev/null +++ b/profiles/skeinforge_meta.csv @@ -0,0 +1,5 @@ +Format is tab separated skeinforge meta settings. +Name Value +WindowPosition 0+0 +description False +polyfile True diff --git a/profiles/skeinforge_profile.csv b/profiles/skeinforge_profile.csv new file mode 100644 index 0000000..1d60c1b --- /dev/null +++ b/profiles/skeinforge_profile.csv @@ -0,0 +1,7 @@ +Format is tab separated skeinforge profile settings. +Name Value +WindowPosition 0+200 +cutting False +extrusion True +milling False +winding False diff --git a/profiles/skeiniso.csv b/profiles/skeiniso.csv new file mode 100644 index 0000000..8cc481d --- /dev/null +++ b/profiles/skeiniso.csv @@ -0,0 +1,40 @@ +Format is tab separated skeiniso settings. +Name Value +WindowPosition 0+0 +Open File for Skeiniso +Activate Skeiniso False +Frame List +Animation Line Quickening (ratio): 1.0 +Animation Slide Show Rate (layers/second): 2.0 +Axis Rulings True +Band Height (layers): 5 +Bottom Band Brightness (ratio): 0.7 +Bottom Layer Brightness (ratio): 1.0 +From the Bottom False +From the Top True +Draw Arrows False +Go Around Extruder Off Travel False +Layer (index): 0 +Layer Extra Span (integer): 912345678 +Line (index): 0 +Display Line True +View Move False +View Rotate False +Number of Fill Bottom Layers (integer): 1 +Number of Fill Top Layers (integer): 1 +Scale (pixels per millimeter): 15.0 +Screen Horizontal Inset (pixels): 100 +Screen Vertical Inset (pixels): 220 +Viewpoint Latitude (degrees): 15.0 +Viewpoint Longitude (degrees): 210.0 +Width of Axis Negative Side (pixels): 2 +Width of Axis Positive Side (pixels): 6 +Width of Fill Bottom Thread (pixels): 2 +Width of Fill Top Thread (pixels): 2 +Width of Infill Thread (pixels): 1 +Width of Loop Thread (pixels): 2 +Width of Perimeter Inside Thread (pixels): 8 +Width of Perimeter Outside Thread (pixels): 8 +Width of Raft Thread (pixels): 1 +Width of Selection Thread (pixels): 6 +Width of Travel Thread (pixels): 0 diff --git a/profiles/skeinlayer.csv b/profiles/skeinlayer.csv new file mode 100644 index 0000000..fbe43c9 --- /dev/null +++ b/profiles/skeinlayer.csv @@ -0,0 +1,22 @@ +Format is tab separated skeinlayer settings. +Name Value +WindowPosition 0+0 +Open File for Skeinlayer +Activate Skeinlayer False +Frame List +Animation Line Quickening (ratio): 1.0 +Animation Slide Show Rate (layers/second): 2.0 +Draw Arrows True +Go Around Extruder Off Travel False +Layer (index): 15 +Layer Extra Span (integer): 0 +Line (index): 0 +Display Line True +View Move False +Numeric Pointer True +Scale (pixels per millimeter): 15.0 +Screen Horizontal Inset (pixels): 100 +Screen Vertical Inset (pixels): 220 +Width of Extrusion Thread (pixels): 3 +Width of Selection Thread (pixels): 6 +Width of Travel Thread (pixels): 1 diff --git a/profiles/statistic.csv b/profiles/statistic.csv new file mode 100644 index 0000000..871b987 --- /dev/null +++ b/profiles/statistic.csv @@ -0,0 +1,11 @@ +Format is tab separated statistic settings. +Name Value +WindowPosition 0+0 +Activate Statistic True +Machine Time ($/hour): 1.0 +Material ($/kg): 10.0 +Density (kg/m3): 930.0 +Extrusion Diameter over Thickness (ratio): 1.25 +Open File to Generate Statistics for +Print Statistics True +Save Statistics False diff --git a/profiles/unpause.csv b/profiles/unpause.csv new file mode 100644 index 0000000..5ab9392 --- /dev/null +++ b/profiles/unpause.csv @@ -0,0 +1,7 @@ +Format is tab separated unpause settings. +Name Value +WindowPosition 0+0 +Open File for Unpause +Activate Unpause False +Delay (milliseconds): 28.0 +Maximum Speed (ratio): 1.3 diff --git a/profiles/winding.csv b/profiles/winding.csv new file mode 100644 index 0000000..0b65a9f --- /dev/null +++ b/profiles/winding.csv @@ -0,0 +1,4 @@ +Format is tab separated winding settings. +Name Value +WindowPosition 0+400 +Profile Selection: free_wire diff --git a/raft_ABS.csv b/raft_ABS.csv deleted file mode 100644 index 7527b72..0000000 --- a/raft_ABS.csv +++ /dev/null @@ -1,33 +0,0 @@ -Format is tab separated preferences. -Activate Raft: True -Add Raft, Elevate Nozzle, Orbit and Set Altitude: True -Base Infill Density (ratio): 0.5 -Base Layer Thickness over Layer Thickness: 2.2 -Base Layers (integer): 1 -Base Nozzle Lift over Half Base Layer Thickness (ratio): 0.4 -Bottom Altitude: 0.1 -Open File to be Rafted -Infill Overhang (ratio): 0.1 -Interface Infill Density (ratio): 0.4 -Interface Layer Thickness over Layer Thickness: 1.4 -Interface Layers (integer): 3 -Interface Nozzle Lift over Half Interface Layer Thickness (ratio): 0.5 -Operating Nozzle Lift over Half Layer Thickness (ratio): 1.0 -Raft Outset Radius over Extrusion Width (ratio): 7.5 -Support Inset over Perimeter Extrusion Width (ratio): 0.0 -No Support Material True -Support Material Everywhere False -Support Material on Exterior Only False -Support Minimum Angle (degrees): 60.0 -Temperature Change Time Before Raft (seconds): 0.0 -Temperature Change Time Before First Layer Outline (seconds): 0.0 -Temperature Change Time Before Next Threads (seconds): 0.0 -Temperature Change Time Before Support Layers (seconds): 0.0 -Temperature Change Time Before Supported Layers (seconds): 0.0 -Temperature of Raft (Celcius): 230.0 -Temperature of Shape First Layer Outline (Celcius): 215.0 -Temperature of Shape First Layer Within (Celcius): 215.0 -Temperature of Shape Next Layers (Celcius): 220.0 -Temperature of Support Layers (Celcius): 220.0 -Temperature of Supported Layers (Celcius): 220.0 -windowPositionRaft Preferences 6+23 diff --git a/skeinforge.csv b/skeinforge.csv deleted file mode 100644 index 980129b..0000000 --- a/skeinforge.csv +++ /dev/null @@ -1,3 +0,0 @@ -Format is tab separated preferences. -Open File to be Skeinforged -windowPositionBehold Preferences 0+0 diff --git a/skeinview.csv b/skeinview.csv deleted file mode 100644 index df4ac6e..0000000 --- a/skeinview.csv +++ /dev/null @@ -1,9 +0,0 @@ -Format is tab separated preferences. -Activate Skeinview False -Draw Arrows True -Open File to Skeinview -Go Around Extruder Off Travel False -Pixels over Extrusion Width (ratio): 10.0 -Screen Horizontal Inset (pixels): 100 -Screen Vertical Inset (pixels): 100 -windowPositionBehold Preferences 0+0 diff --git a/speed.csv b/speed.csv deleted file mode 100644 index d675614..0000000 --- a/speed.csv +++ /dev/null @@ -1,16 +0,0 @@ -Format is tab separated preferences. -Activate Speed: True -Bridge Feedrate Multiplier (ratio): 1.0 -Extrusion Diameter over Thickness (ratio): 1.583 -Feedrate (mm/s): 34.1 -Open File to be Speeded -Do Not Add Flowrate False -Metric False -PWM Setting True -Flowrate PWM Setting (if PWM Setting is Chosen): 255.0 -Orbital Feedrate over Operating Feedrate (ratio): 1.0 -Perimeter Feedrate over Operating Feedrate (ratio): 1.0 -Perimeter Flowrate over Operating Flowrate (ratio): 1.0 -Support Flowrate over Operating Flowrate (ratio): 1.0 -Travel Feedrate (mm/s): 55.0 -windowPositionBehold Preferences 0+0 diff --git a/statistic.csv b/statistic.csv deleted file mode 100644 index 95eded8..0000000 --- a/statistic.csv +++ /dev/null @@ -1,6 +0,0 @@ -Format is tab separated preferences. -Activate Statistic True -Open File to Generate Statistics for -Print Statistics True -Save Statistics False -windowPositionBehold Preferences 0+0 diff --git a/stretch.csv b/stretch.csv deleted file mode 100644 index e6afe28..0000000 --- a/stretch.csv +++ /dev/null @@ -1,8 +0,0 @@ -Format is tab separated preferences. -Activate Stretch False -Loop Stretch Over Extrusion Width (ratio): 0.15 -Path Stretch Over Extrusion Width (ratio): 0.0 -Open File to be Stretched -Stretch From Distance Over Extrusion Width (ratio): 2.0 -Perimeter Maximum Stretch Over Extrusion Width (ratio): 0.3 -windowPositionBehold Preferences 0+0 diff --git a/tower.csv b/tower.csv deleted file mode 100644 index 5f5c2d2..0000000 --- a/tower.csv +++ /dev/null @@ -1,7 +0,0 @@ -Format is tab separated preferences. -Activate Tower False -Extruder Possible Collision Cone Angle (degrees): 60.0 -Open File to be Towered -Maximum Tower Height (layers): 10 -Tower Start Layer (integer): 2 -windowPositionBehold Preferences 0+0 diff --git a/unpause.csv b/unpause.csv deleted file mode 100644 index b77ef20..0000000 --- a/unpause.csv +++ /dev/null @@ -1,6 +0,0 @@ -Format is tab separated preferences. -Activate Unpause False -Delay (milliseconds): 28.0 -Open File to be Unpaused -Maximum Speed (ratio): 1.5 -windowPositionBehold Preferences 0+0 diff --git a/vectorwrite.csv b/vectorwrite.csv deleted file mode 100644 index 2349e84..0000000 --- a/vectorwrite.csv +++ /dev/null @@ -1,6 +0,0 @@ -Format is tab separated preferences. -Activate Vectorwrite False -Open File to Write Vector Graphics for -Minimum Number of Layers for Multiple Files (integer): 10 -Pixels over Extrusion Width (ratio): 5.0 -windowPositionBehold Preferences 0+0 diff --git a/wipe.csv b/wipe.csv deleted file mode 100644 index ef41004..0000000 --- a/wipe.csv +++ /dev/null @@ -1,14 +0,0 @@ -Format is tab separated preferences. -Activate Wipe False -Open File to be Wiped -Location Arrival X (mm): -70.0 -Location Arrival Y (mm): -50.0 -Location Arrival Z (mm): 50.0 -Location Departure X (mm): -70.0 -Location Departure Y (mm): -40.0 -Location Departure Z (mm): 50.0 -Location Wipe X (mm): -70.0 -Location Wipe Y (mm): -70.0 -Location Wipe Z (mm): 50.0 -Wipe Period (layers): 3 -windowPositionBehold Preferences 0+0 -- cgit v1.2.3