From b1392ecce9f9bacfd8eee42a0e21f39b29cf0fc5 Mon Sep 17 00:00:00 2001 From: dakkar Date: Sat, 2 Oct 2010 13:58:47 +0100 Subject: mk5-heated-platform, from ReplicatorG 0019 --- gcode_scripts/end.txt | 9 +++++++++ gcode_scripts/start.txt | 20 ++++++++++++++++++++ 2 files changed, 29 insertions(+) create mode 100644 gcode_scripts/end.txt create mode 100644 gcode_scripts/start.txt (limited to 'gcode_scripts') diff --git a/gcode_scripts/end.txt b/gcode_scripts/end.txt new file mode 100644 index 0000000..c1c26a7 --- /dev/null +++ b/gcode_scripts/end.txt @@ -0,0 +1,9 @@ +(end of the file, cooldown routines) +M104 S0 T0 (temp zero) +M109 S0 T0 (platform off) +M106 (fan on) +G92 Z0 (zero our z axis - hack b/c skeinforge mangles gcodes in end.txt) +G1 Z10 (go up 10 b/c it was zeroed earlier.) +G1 X0 Y0 Z10 (go to 0,0,z) +M18 (turn off steppers.) + diff --git a/gcode_scripts/start.txt b/gcode_scripts/start.txt new file mode 100644 index 0000000..3ca7561 --- /dev/null +++ b/gcode_scripts/start.txt @@ -0,0 +1,20 @@ +(Cupcake ABS with heated build platform skeinforge profile) +(beginning of start.txt) +M104 S220 T0 (Extruder Temperature to 220 Celsius) +M109 S110 T0 (Heated Platform Temperature to 110 Celsius) +M107 (fan off) +G21 (Metric FTW) +G90 (Absolute Positioning) +G92 X0 Y0 Z0 (You are now at 0,0,0) +(You have failed me for the last time, MakerBot) +G0 Z15 (Move up for warmup) +M108 S255 (Extruder speed = max) +M6 T0 (Wait for tool to heat up) +G04 P5000 (Wait 5 seconds) +M101 (Extruder on, forward) +G04 P5000 (Wait 5 seconds) +M103 (Extruder off) +M01 (The heated build platform is heating up. Wait until after the lights have turned off for the first time, clear the test extrusion, and click yes.) +G0 Z0 (Go back to zero.) +(end of start.txt) + -- cgit v1.2.3