From 9157e18663f7b6715cfc9a30c66325b8e1a52a3a Mon Sep 17 00:00:00 2001 From: dakkar Date: Mon, 7 Sep 2009 11:05:09 +0200 Subject: add ebuild link and confirm that instructions work --- src/HW/makerbot/arduino-on-gentoo/document.en.rest.txt | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'src/HW/makerbot/arduino-on-gentoo/document.en.rest.txt') diff --git a/src/HW/makerbot/arduino-on-gentoo/document.en.rest.txt b/src/HW/makerbot/arduino-on-gentoo/document.en.rest.txt index 3220c0e..f5ced2f 100644 --- a/src/HW/makerbot/arduino-on-gentoo/document.en.rest.txt +++ b/src/HW/makerbot/arduino-on-gentoo/document.en.rest.txt @@ -67,6 +67,10 @@ bundled version:: It runs! +.. warning:: In the official Portage tree, RXTX is at version 2.1.7.2, + which does not seem to work. We need version 2.2; you can get it + from `my overlay `_. + Of course, no Sanguino_ support, and the CupCake_ main board is a Sanguino_. @@ -134,8 +138,10 @@ Now:: ./make.sh ./run.sh -and I have the environment working! Well, at least it starts and lists -the appropriate boards. We'll see if it actually works. +and I have the environment working! Actually working: I used the +results of these instructions to upgrade the firmware of both boards +on the CupCake_, and it worked perfectly. + .. _CupCake: http://wiki.makerbot.com/cupcake .. _`MakerBot instructions`: http://wiki.makerbot.com/cupcake-motherboard-firmware-update -- cgit v1.2.3