From 433102f424c6a9d6d6a5fd771b0244c836bb48fa Mon Sep 17 00:00:00 2001
From: dakkar <dakkar@thenautilus.net>
Date: Fri, 10 Feb 2023 12:45:24 +0000
Subject: update most links

https, re-point some dead ones
---
 src/HW/makerbot/printed-objects/document.en.rest.tt | 8 ++++----
 src/HW/makerbot/printed-objects/document.it.rest.tt | 8 ++++----
 2 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'src/HW/makerbot/printed-objects')

diff --git a/src/HW/makerbot/printed-objects/document.en.rest.tt b/src/HW/makerbot/printed-objects/document.en.rest.tt
index c4f862f..2f07d2f 100644
--- a/src/HW/makerbot/printed-objects/document.en.rest.tt
+++ b/src/HW/makerbot/printed-objects/document.en.rest.tt
@@ -55,7 +55,7 @@ The benchmark piece
 ===================
 
 Just to try it out, I printed `the RepRap benchmark piece
-<http://www.thingiverse.com/thing:968>`_.
+<https://www.thingiverse.com/thing:968>`_.
 
 First problem: the raft wasn't sticking to the build base; solved by
 keeping the extruder nearer to the base.
@@ -110,8 +110,8 @@ The whistle
 ===========
 
 Using the new build base, I printed `the whistle
-<http://www.thingiverse.com/thing:1046>`_ (I actually used `the
-cleaned version <http://www.thingiverse.com/thing:1048>`_ ).
+<https://www.thingiverse.com/thing:1046>`_ (I actually used `the
+cleaned version <https://www.thingiverse.com/thing:1048>`_ ).
 
 It came out pretty well, but it does not actually whistle…
 
@@ -134,7 +134,7 @@ The "printruder"
 ================
 
 Since the whistle came out well enough, I tried a "hard piece": the
-"`printruder <http://www.thingiverse.com/thing:958>`_", which is the
+"`printruder <https://www.thingiverse.com/thing:958>`_", which is the
 support part of the extruder, in a printable version.
 
 I have to say that it feels like magic, seeing a printer producing its
diff --git a/src/HW/makerbot/printed-objects/document.it.rest.tt b/src/HW/makerbot/printed-objects/document.it.rest.tt
index fe11ab9..dffb2c5 100644
--- a/src/HW/makerbot/printed-objects/document.it.rest.tt
+++ b/src/HW/makerbot/printed-objects/document.it.rest.tt
@@ -53,7 +53,7 @@ Il pezzo di riferimento
 =======================
 
 Per prova, ho stampato `il pezzo di prova per RepRap
-<http://www.thingiverse.com/thing:968>`_.
+<https://www.thingiverse.com/thing:968>`_.
 
 Primo problema: la raft non si voleva attaccare alla base; risolto
 tenendo l'estrusore più vicino alla base.
@@ -110,8 +110,8 @@ Il fischietto
 =============
 
 Armato della nuova base di stampa, ho stampato `il fischietto
-<http://www.thingiverse.com/thing:1046>`_ (in effetti ho usato `la
-versione ripulita <http://www.thingiverse.com/thing:1048>`_ ).
+<https://www.thingiverse.com/thing:1046>`_ (in effetti ho usato `la
+versione ripulita <https://www.thingiverse.com/thing:1048>`_ ).
 
 È venuto piuttosto bene, ma non fischia…
 
@@ -135,7 +135,7 @@ Il "printruder"
 
 Visto che il fischietto è venuto abbastanza bene, ho provato a
 stampare un pezzo difficile: il "`printruder
-<http://www.thingiverse.com/thing:958>`_", ovvero il supporto
+<https://www.thingiverse.com/thing:958>`_", ovvero il supporto
 dell'estrusore, in versione stampabile.
 
 Bisogna dire che ha del magico, vedere una stampante che produce i
-- 
cgit v1.2.3