From 433102f424c6a9d6d6a5fd771b0244c836bb48fa Mon Sep 17 00:00:00 2001 From: dakkar Date: Fri, 10 Feb 2023 12:45:24 +0000 Subject: update most links https, re-point some dead ones --- src/HW/makerbot/arduino-on-gentoo/document.en.rest.txt | 8 ++++---- src/HW/makerbot/arduino-on-gentoo/document.it.rest.txt | 8 ++++---- src/HW/makerbot/cupcake-build/document.en.rest.tt | 4 ++-- src/HW/makerbot/cupcake-build/document.it.rest.tt | 6 +++--- src/HW/makerbot/printed-objects/document.en.rest.tt | 8 ++++---- src/HW/makerbot/printed-objects/document.it.rest.tt | 8 ++++---- 6 files changed, 21 insertions(+), 21 deletions(-) (limited to 'src/HW/makerbot') diff --git a/src/HW/makerbot/arduino-on-gentoo/document.en.rest.txt b/src/HW/makerbot/arduino-on-gentoo/document.en.rest.txt index f5ced2f..dcd0437 100644 --- a/src/HW/makerbot/arduino-on-gentoo/document.en.rest.txt +++ b/src/HW/makerbot/arduino-on-gentoo/document.en.rest.txt @@ -145,9 +145,9 @@ on the CupCake_, and it worked perfectly. .. _CupCake: http://wiki.makerbot.com/cupcake .. _`MakerBot instructions`: http://wiki.makerbot.com/cupcake-motherboard-firmware-update -.. _crossdev: http://en.gentoo-wiki.com/wiki/Crossdev -.. _`hint found in a mailing list post`: http://www.mail-archive.com/avr-libc-dev@nongnu.org/msg03019.html -.. _Arduino: http://arduino.cc/ -.. _`Arduino instructions`: http://code.google.com/p/arduino/wiki/BuildingArduino +.. _crossdev: https://wiki.gentoo.com/wiki/Crossdev +.. _`hint found in a mailing list post`: https://www.mail-archive.com/avr-libc-dev@nongnu.org/msg03019.html +.. _Arduino: https://arduino.cc/ +.. _`Arduino instructions`: https://code.google.com/p/arduino/wiki/BuildingArduino .. _Sanguino: http://sanguino.cc/ .. _`Sanguino instructions`: http://sanguino.cc/softwareforlinux diff --git a/src/HW/makerbot/arduino-on-gentoo/document.it.rest.txt b/src/HW/makerbot/arduino-on-gentoo/document.it.rest.txt index 6a2c51f..a149716 100644 --- a/src/HW/makerbot/arduino-on-gentoo/document.it.rest.txt +++ b/src/HW/makerbot/arduino-on-gentoo/document.it.rest.txt @@ -144,9 +144,9 @@ le board della CupCake_, e ha funzionato perfettamente. .. _CupCake: http://wiki.makerbot.com/cupcake .. _`istruzioni di MakerBot`: http://wiki.makerbot.com/cupcake-motherboard-firmware-update -.. _crossdev: http://en.gentoo-wiki.com/wiki/Crossdev -.. _`consiglio trovato su una mailing list`: http://www.mail-archive.com/avr-libc-dev@nongnu.org/msg03019.html -.. _Arduino: http://arduino.cc/ -.. _`istruzioni Arduino`: http://code.google.com/p/arduino/wiki/BuildingArduino +.. _crossdev: https://wiki.gentoo.com/wiki/Crossdev +.. _`consiglio trovato su una mailing list`: https://www.mail-archive.com/avr-libc-dev@nongnu.org/msg03019.html +.. _Arduino: https://arduino.cc/ +.. _`istruzioni Arduino`: https://code.google.com/p/arduino/wiki/BuildingArduino .. _Sanguino: http://sanguino.cc/ .. _`istruzioni Sanguino`: http://sanguino.cc/softwareforlinux diff --git a/src/HW/makerbot/cupcake-build/document.en.rest.tt b/src/HW/makerbot/cupcake-build/document.en.rest.tt index 757c913..6d8bdf6 100644 --- a/src/HW/makerbot/cupcake-build/document.en.rest.tt +++ b/src/HW/makerbot/cupcake-build/document.en.rest.tt @@ -21,7 +21,7 @@ Having all the pieces, and the instructions, we start building. The ``USBtinyISP`` programmer ============================= -(`link to the instructions `_) +(`link to the instructions `_) It would not have been strictly necessary, since the batch #5 CupCakes come with pre-programmed microcontrollers, but it was in the package, @@ -148,7 +148,7 @@ motor, on the other it was precisely centered. `_, by gluing together the two wheels included in the kit. In my case, and `apparently also for someone else - `_, + `_, the resulting wheel is too thick to fit between the flanges of the pinch wheel, so it's impossible to use. diff --git a/src/HW/makerbot/cupcake-build/document.it.rest.tt b/src/HW/makerbot/cupcake-build/document.it.rest.tt index 183a7c5..18f9123 100644 --- a/src/HW/makerbot/cupcake-build/document.it.rest.tt +++ b/src/HW/makerbot/cupcake-build/document.it.rest.tt @@ -21,7 +21,7 @@ montare i pezzi. Il programmatore ``USBtinyISP`` =============================== -(`link alle istruzioni `_) +(`link alle istruzioni `_) Non sarebbe stato proprio necessario, visto che le CupCake batch #5 vengono spedite con i microcontroller già programmati, ma visto che @@ -153,7 +153,7 @@ centrata. `_, ottenuta incollando assieme le due ruote contenute nel kit. Nel mio caso, e `sembra anche per qualcun altro - `_, + `_, tale ruota doppia è troppo spessa per entrare tra le pareti della ruota dentata, per cui non è possibile usarla. @@ -175,7 +175,7 @@ Prima stampa ============ Finalmente, posso stampare! L'oggetto di prova è una `linguetta a clip -per i fine-corsa Z `_, visto che +per i fine-corsa Z `_, visto che nel mio kit il piano Z non ha le fessure per fermare le linguette. [% WRAPPER 'figure.tt' pic='img_0973' alt='CupCake che stampa il primo diff --git a/src/HW/makerbot/printed-objects/document.en.rest.tt b/src/HW/makerbot/printed-objects/document.en.rest.tt index c4f862f..2f07d2f 100644 --- a/src/HW/makerbot/printed-objects/document.en.rest.tt +++ b/src/HW/makerbot/printed-objects/document.en.rest.tt @@ -55,7 +55,7 @@ The benchmark piece =================== Just to try it out, I printed `the RepRap benchmark piece -`_. +`_. First problem: the raft wasn't sticking to the build base; solved by keeping the extruder nearer to the base. @@ -110,8 +110,8 @@ The whistle =========== Using the new build base, I printed `the whistle -`_ (I actually used `the -cleaned version `_ ). +`_ (I actually used `the +cleaned version `_ ). It came out pretty well, but it does not actually whistle… @@ -134,7 +134,7 @@ The "printruder" ================ Since the whistle came out well enough, I tried a "hard piece": the -"`printruder `_", which is the +"`printruder `_", which is the support part of the extruder, in a printable version. I have to say that it feels like magic, seeing a printer producing its diff --git a/src/HW/makerbot/printed-objects/document.it.rest.tt b/src/HW/makerbot/printed-objects/document.it.rest.tt index fe11ab9..dffb2c5 100644 --- a/src/HW/makerbot/printed-objects/document.it.rest.tt +++ b/src/HW/makerbot/printed-objects/document.it.rest.tt @@ -53,7 +53,7 @@ Il pezzo di riferimento ======================= Per prova, ho stampato `il pezzo di prova per RepRap -`_. +`_. Primo problema: la raft non si voleva attaccare alla base; risolto tenendo l'estrusore più vicino alla base. @@ -110,8 +110,8 @@ Il fischietto ============= Armato della nuova base di stampa, ho stampato `il fischietto -`_ (in effetti ho usato `la -versione ripulita `_ ). +`_ (in effetti ho usato `la +versione ripulita `_ ). È venuto piuttosto bene, ma non fischia… @@ -135,7 +135,7 @@ Il "printruder" Visto che il fischietto è venuto abbastanza bene, ho provato a stampare un pezzo difficile: il "`printruder -`_", ovvero il supporto +`_", ovvero il supporto dell'estrusore, in versione stampabile. Bisogna dire che ha del magico, vedere una stampante che produce i -- cgit v1.2.3