From f3b6e73ca1fcf29731cc2a85114c41fad87d0d96 Mon Sep 17 00:00:00 2001 From: dakkar Date: Mon, 17 Aug 2009 10:54:50 +0200 Subject: moved stuff around it's a good idea to separate the documents from the templates --- src/HW/newt-setup/document.en.rest.txt | 140 +++++++++++++++++++++++++++++++ src/HW/newt-setup/document.it.rest.txt | 140 +++++++++++++++++++++++++++++++ src/HW/newt-setup/du2html.xsl | 1 + src/HW/newton-7110/document.en.rest.txt | 131 +++++++++++++++++++++++++++++ src/HW/newton-7110/document.it.rest.txt | 142 ++++++++++++++++++++++++++++++++ src/HW/newton-7110/du2html.xsl | 1 + 6 files changed, 555 insertions(+) create mode 100644 src/HW/newt-setup/document.en.rest.txt create mode 100644 src/HW/newt-setup/document.it.rest.txt create mode 120000 src/HW/newt-setup/du2html.xsl create mode 100644 src/HW/newton-7110/document.en.rest.txt create mode 100644 src/HW/newton-7110/document.it.rest.txt create mode 120000 src/HW/newton-7110/du2html.xsl (limited to 'src/HW') diff --git a/src/HW/newt-setup/document.en.rest.txt b/src/HW/newt-setup/document.en.rest.txt new file mode 100644 index 0000000..cf7cba1 --- /dev/null +++ b/src/HW/newt-setup/document.en.rest.txt @@ -0,0 +1,140 @@ +Newton and Nokia 7110 Setup +=========================== +:CreationDate: 2003-01-28 10:09:25 +:tags: hardware + +Internet Settings +----------------- + +For Internet Setup of NIE 2.0 + +Protocol: + + PPP + +Configuration: + + Server + +User ID: + + + +Access Number: + + 2800 + +When closing, disconnect: + + after 1 minute + +Primary DNS/Name Server Address: + + 10.127.1.141 + +Domain Name: + + omnitel.it + +Modem Settings: + + 7110 + +Country: + + Italy + +Modem Settings +-------------- + +For Modem Modifier v2.02 + +Modem Name: + + 7110 + +Version: + + 1 + +Organization: + + Nokia + +ID the Modem: + + False + +Use Hardware CD: + + True + +Use Config. String: + + True + +Use Dial Options: + + True + +Hang Up At Disconnect: + + True + +Supports Cellular: + + **False** + +Supports EC: + + True + +Supports LCS: + + False + +Direct Connect Only: + + False + +Connect Speeds: + + 2400 4800 7200 9600 12000 14400 + +Config. Speed: + + 19200 + +Command Timeout: + + 2000 + +Max Chars Per Line: + + 40 + +Inter-Command Delay: + + 50 + +Modem ID String: + +Config. String No EC: + + AT&FV1E0&D2&S0&C1S0=0 + +Config. String EC Only: + + AT&FV1E0&D2&S0&C1S0=0+CBST=75,0,1 + +Config. String EC And Fallback: + + AT&FV1E0&D2&S0&C1S0=0+CBST=75,0,1 + +Config. String Cellular: + +Config. String Direct Connect: + +Smart Cr's: + + checked diff --git a/src/HW/newt-setup/document.it.rest.txt b/src/HW/newt-setup/document.it.rest.txt new file mode 100644 index 0000000..dc24f7c --- /dev/null +++ b/src/HW/newt-setup/document.it.rest.txt @@ -0,0 +1,140 @@ +Impostazioni Newton e Nokia 7110 +================================ +:CreationDate: 2003-01-28 10:09:25 +:tags: hardware + +Impostazioni Internet +--------------------- + +Per Internet Setup di NIE 2.0 + +Protocol: + + PPP + +Configuration: + + Server + +User ID: + + + +Access Number: + + 2800 + +When closing, disconnect: + + after 1 minute + +Primary DNS/Name Server Address: + + 10.127.1.141 + +Domain Name: + + omnitel.it + +Modem Settings: + + 7110 + +Country: + + Italy + +Impostazioni modem +------------------ + +Per Modem Modifier v2.02 + +Modem Name: + + 7110 + +Version: + + 1 + +Organization: + + Nokia + +ID the Modem: + + False + +Use Hardware CD: + + True + +Use Config. String: + + True + +Use Dial Options: + + True + +Hang Up At Disconnect: + + True + +Supports Cellular: + + **False** + +Supports EC: + + True + +Supports LCS: + + False + +Direct Connect Only: + + False + +Connect Speeds: + + 2400 4800 7200 9600 12000 14400 + +Config. Speed: + + 19200 + +Command Timeout: + + 2000 + +Max Chars Per Line: + + 40 + +Inter-Command Delay: + + 50 + +Modem ID String: + +Config. String No EC: + + AT&FV1E0&D2&S0&C1S0=0 + +Config. String EC Only: + + AT&FV1E0&D2&S0&C1S0=0+CBST=75,0,1 + +Config. String EC And Fallback: + + AT&FV1E0&D2&S0&C1S0=0+CBST=75,0,1 + +Config. String Cellular: + +Config. String Direct Connect: + +Smart Cr's: + + checked diff --git a/src/HW/newt-setup/du2html.xsl b/src/HW/newt-setup/du2html.xsl new file mode 120000 index 0000000..e2487e0 --- /dev/null +++ b/src/HW/newt-setup/du2html.xsl @@ -0,0 +1 @@ +../../../templates/du2html.xsl \ No newline at end of file diff --git a/src/HW/newton-7110/document.en.rest.txt b/src/HW/newton-7110/document.en.rest.txt new file mode 100644 index 0000000..d01780e --- /dev/null +++ b/src/HW/newton-7110/document.en.rest.txt @@ -0,0 +1,131 @@ +How to connect a Nokia 7110 to a Newton +======================================= +:CreationDate: 2003-07-14 9:41:11 +:tags: hardware + +After reading on the `NewtonTalk`_ mailing list an article (not present in any +of the `two`_ `archives`_) by `Richard Avery`_ telling how he connected a +`Nokia 6210`_ to his Newton, I decided to buy a cellular phone and try it. + +My choice has been a model `7110`_ (mostly because of its price...), which +however has a built-in modem, this being necessary to use it with the Newton +without special software. I found also the data cable **DLR-3**: note that data +cable for lower models (**DAU-9P** and the like) doesn't allow to use the modem +(it's possible to use 51xx and 61xx phones for data trasmission with those +cables, but only under Windows with a software modem). + +Having the cable, we can test it putting it between the phone and a computer +with a RS-232 serial port. With a terminal emulation program: + +In the picture you can see how to the ati (identification) commnad, the phone +answers with its name, and to the ati2 command, it asnwers with the version +number of its software. + +But the Newton has no RS-232 port! +`````````````````````````````````` + +Yes, this could seem a problem at first sight. On the other hand, as many know, +with the special serial adapter (dongle) it's possible to extract a RS-422 (Mac +serial) from the Newton; moreover, RS-422 is compatible with RS-232: just +connect the right wires. I did it this way: (pinouts are connector side): + ++------+------+ +|RS-232|RS-422| ++------+------+ +|1 |2 | ++------+------+ +|2 |5 | ++------+------+ +|3 |3 | ++------+------+ +|4 |1 | ++------+------+ +|5 |8 & 4 | ++------+------+ +|6 |2 | ++------+------+ +|7 |1 | ++------+------+ +|8 |2 | ++------+------+ + + +On the Web you can find several texts about different serial interfaces: the +search is left as useful exercise to the reader. + +To test the adapter, link everything up (phone - DLR-3 - adapter just built - +dongle - Newton) and use a terminal emulator on the Newton: + +The program used is `PT100`_ + +What about the Internet? +```````````````````````` + +All right, at this point the only thing missing is using the phone to connect +the Newton wirelessly to the Internet. You'll need `Newton Internet Enabler +version 2`_, and `Modem Modifier version 2.02`_. + +Here you can see the settings I use (the links are to a text version of the +same). + +There are some details to clear: + +* 2800 is the phone number of `Omnitel`_ (Vodaphone group) Internet access. + It seems to be the cheapest in Italy. + +* There's no need for username or password, since the authentication is done + by the SIM card. + +* The DNS number **is NOT official**: it would get sent during PPP + handshaking, but the Newton doesn't understand it. The information come + from an Italian web page (`Come accedere a Omnitelnet 2800 da Linux`_). + **DO NOT** use this number if you are not using Omnitel's service. + +* Configuration strings have been taken form the .INF file for the 7110 + installation under Windows. + +* Someone might have noticed that the +CBST=0,0,1 command has been changed in + +CBST=75,0,1. This allows the phone to connect at 14400bps instead of + 9600bps. The information comes from an Italian web page (`Portel`_). In + some areas, the phone will not correclty establish the data connection if + set for 14400bps. I have made two modem profiles, one for each speed. I + still need to find a way to discover which one to use without trial and + error (and paying for two calls). + +Enjoy! + +.. _`pt100`: + http://www.scrawlsoft.com/products/pt100/info.html + +.. _`portel`: + http://www.portel.it/news/news2.asp?news_id=1563 + +.. _`richard avery`: + mailto:rjavery@mail.com + +.. _`come accedere a omnitelnet 2800 da linux`: + http://www.pluto.linux.it/ildp/journal/pj0003/omnitelnet2800.html + +.. _`newtontalk`: + http://www.newtontalk.net/ + +.. _`two`: + http://www.chuma.org/newton/ntalk-archive/ + +.. _`7110`: + http://www.nokiausa.com/phones/1,2499,;;rt7100,FF.html#7100 + +.. _`archives`: + http://www.newtontalk.net/archive/ + +.. _`nokia 6210`: + http://www.nokia.it/cellulari/6210/home.asp + +.. _`newton internet enabler version 2`: + http://www.unna.org/unna/apple/internet/NIE2/ + +.. _`omnitel`: + http://www.omnitel.it/ + +.. _`modem modifier version 2.02`: + http://www.unna.org/unna/utilites/ModemModifier2.02/ diff --git a/src/HW/newton-7110/document.it.rest.txt b/src/HW/newton-7110/document.it.rest.txt new file mode 100644 index 0000000..05542e4 --- /dev/null +++ b/src/HW/newton-7110/document.it.rest.txt @@ -0,0 +1,142 @@ +Come collegare un Nokia 7110 a un Newton +======================================== +:CreationDate: 2003-07-14 9:41:11 +:tags: hardware + +Dopo aver letto sulla mailing list `NewtonTalk`_ un articolo (non presente in +nessuno dei `due`_ `archivi`_) di `Richard Avery`_ in cui diceva di essere +riuscito a collegare un `Nokia 6210`_ al suo Newton, ho deciso di acquistare un +cellulare e provare anch'io. + +La mia scelta è ricaduta sul modello `7110`_ (soprattutto a causa del +prezzo...), che comunque contiene un modem, caratteristica essenziale per +essere usato con il Newton senza programmi speciali. Dopo diverse disavventure +sono riuscito a procurarmi anche l'apposito cavo **DLR-3** (acquistato da +`NIXIE`_): notare che il cavo dati per modelli inferiori (**DAU-9P** e simili) +non permette di utilizzare il modem (è possibile usare i modelli 51xx e 61xx +per trasmissione dati con questi cavi, ma solo sotto Windows grazie a un +software modem). + +Ottenuto il cavo, si può provarlo collegandolo tra il telefono e un computer +con porta RS-232, usando un programma di emulazione terminale: + +Nell'immagine si può vedere come al comando ati (identificazione) il telefono +risponda col proprio nome, e ad ati2 risponda con il numero di versione del +proprio software + +Ma il Newton non ha una RS-232! +``````````````````````````````` + +Infatti, questo può risultare un problema a prima vista. D'altronde, come molti +sanno, con l'apposito adattatore seriale (*dongle* per gli anglofoni) è +possibile estrarre una RS-422 (seriale Mac) dal Newton; inoltre, la RS-422 è +compatibile con la RS-232: basta collegare i fili giusti. Io ho fatto così (le +piedinature sono lato connettore): + ++------+------+ +|RS-232|RS-422| ++------+------+ +|1 |2 | ++------+------+ +|2 |5 | ++------+------+ +|3 |3 | ++------+------+ +|4 |1 | ++------+------+ +|5 |8 & 4 | ++------+------+ +|6 |2 | ++------+------+ +|7 |1 | ++------+------+ +|8 |2 | ++------+------+ + + +In rete è possibile trovare svariate spiegazioni sulle varie interfacce +seriali: la ricerca è lasciata come utile esercizio al lettore. + +Per provare l'adattatore, collegate il tutto (telefono - DLR-3 - adattatore +appena costruito - dongle - Newton) e usate un emulatore di terminale sul +Newton: + +Il programma usato è `PT100`_ + +E Internet? +``````````` + +D'accordo, arrivati a questo punto l'unica cosa che manca è usare il telefono +per connettere il Newton a Internet via radio. Oltre al `Newton Internet +Enabler versione 2`_, vi servirà `Modem Modifier versione 2.02`_. + +Qui sotto potete vedere le impostazioni che uso io (i link puntano a una +versione testo delle stesse). + +Ci sono alcuni punti da chiarire: + +* Il numero 2800 è quello del servizio Internet di `Omnitel`_. L'ho scelto + perché mi sembra quello più economico (`accetto volentieri`_ smentite e + suggerimenti) + +* Il nome utente e la password non sono necessari, in quanto l'autenticazione + avviene tramite la carta SIM + +* Il numero del DNS **non è ufficiale**: verrebbe fornito dinamicamente + durante l'handshaking del PPP, ma il Newton non è in grado di capirlo. + L'informazione viene da `Come accedere a Omnitelnet 2800 da Linux`_ + +* Le stringhe di configurazione sono state ricavate dai file .INF per + l'installazione del 7110 sotto Windows. + +* Qualcuno avrà notato che il comando +CBST=0,0,1 è stato rimpiazzato da + +CBST=75,0,1. Questo permette di collegarsi a una velocità di 14400bps + anziché 9600bps. L'informazione viene da `Portel`_. È possibile che in + alcune zone (mi è capitato a Lucca) il telefono non prenda la linea dati se + configurato per 14400bps. Io ho creato due profili modem, uno a 14440bps e + uno a 9600bps, e scelgo quello che funziona. Devo ancora scoprire un modo + per decidere quale usare senza andare per tentativi (e spendere 400 lire). + +Buon divertimento! + +.. _`pt100`: + http://www.scrawlsoft.com/products/pt100/info.html + +.. _`portel`: + http://www.portel.it/news/news2.asp?news_id=1563 + +.. _`accetto volentieri`: + mailto:dakkar@thenautilus.net + +.. _`newton internet enabler versione 2`: + http://www.unna.org/unna/apple/internet/NIE2/ + +.. _`richard avery`: + mailto:rjavery@mail.com + +.. _`come accedere a omnitelnet 2800 da linux`: + http://www.pluto.linux.it/ildp/journal/pj0003/omnitelnet2800.html + +.. _`newtontalk`: + http://www.newtontalk.net/ + +.. _`nixie`: + http://www.nixie.it/ + +.. _`due`: + http://www.chuma.org/newton/ntalk-archive/ + +.. _`archivi`: + http://www.newtontalk.net/archive/ + +.. _`7110`: + http://www.nokia.it/cellulari/7110/Home.asp + +.. _`nokia 6210`: + http://www.nokia.it/cellulari/6210/home.asp + +.. _`modem modifier versione 2.02`: + http://www.unna.org/unna/utilites/ModemModifier2.02/ + +.. _`omnitel`: + http://www.omnitel.it/ diff --git a/src/HW/newton-7110/du2html.xsl b/src/HW/newton-7110/du2html.xsl new file mode 120000 index 0000000..e2487e0 --- /dev/null +++ b/src/HW/newton-7110/du2html.xsl @@ -0,0 +1 @@ +../../../templates/du2html.xsl \ No newline at end of file -- cgit v1.2.3