calibration only needs to be done once!

Revert "force calibration"

This reverts commit 6aa491b6da5f842f4d147a283f05ddd57fb824dd.

1 files changed, 1 insertions, 42 deletions

diff --git a/main.ino b/main.ino
index 8597702..bde8892 100644
--- a/main.ino
+++ b/main.ino
@@ -48,9 +48,6 @@ void showThings(bool all=false) {
   display.updateWindow(0, 0, GxEPD_WIDTH, GxEPD_HEIGHT, false);
 }
 
-unsigned long startTime;
-bool frcDone = false;
-
 void setup() {
 
     Serial.begin(115200);
@@ -98,8 +95,6 @@ void setup() {
         Serial.println(errorMessage);
     }
 
-    startTime = millis();
-
     // this will try to re-init Wire, emit a warning, and carry on
     sensirion_i2c_init();
 
@@ -131,44 +126,8 @@ void loop() {
     char errorMessage[256];
 
     delay(5000);
-    Serial.println(millis());
-
-    if (!frcDone && (millis() - startTime > (3*60 + 30)*1000)) { // 3½ minutes
-      Serial.println("calibration");
-      frcDone=true;
-      display.fillScreen(GxEPD_WHITE);
-      display.setCursor(0,20);
-      display.print("FRC");
-      display.updateWindow(0, 0, GxEPD_WIDTH, GxEPD_HEIGHT, false);
 
-      scd4x.stopPeriodicMeasurement();
-      delay(500);
-
-      uint16_t frcCorrection;
-      error = scd4x.performForcedRecalibration(420,frcCorrection);
-      if (error != 0) {
-        Serial.print("scd4x error ");
-        errorToString(error, errorMessage, 256);
-        Serial.println(errorMessage);
-      }
-      Serial.println(frcCorrection);
-      Serial.println(frcCorrection - 0x8000);
-
-      display.fillScreen(GxEPD_WHITE);
-      display.setCursor(0,20);
-      display.print("FRC ");display.print(frcCorrection);
-      display.updateWindow(0, 0, GxEPD_WIDTH, GxEPD_HEIGHT, false);
-      delay(500);
-      scd4x.startPeriodicMeasurement();
-      delay(2000);
-    }
-    
     error = scd4x.readMeasurement(co2, temperature, humidity);
-    if (error != 0) {
-      Serial.print("scd4x error ");
-      errorToString(error, errorMessage, 256);
-      Serial.println(errorMessage);
-    }
 
     char serial[SPS30_MAX_SERIAL_LEN];
     uint16_t data_ready;
@@ -188,7 +147,7 @@ void loop() {
 
     ret = sps30_read_measurement(&m);
 
-    if (error || ret <0) {
+    if (error || ret <0 || co2 ==0) {
       return;
     }