diff --git c/configure.ac w/configure.ac
index 052908b..2cd46ff 100644
--- c/configure.ac
+++ w/configure.ac
@@ -154,6 +154,7 @@ possible_drivers="(none) \
(uirt2) \
(uirt2_raw) \
(usb_uirt_raw) \
+ (usb_irtoy) \
(usbx) \
(udp)"
@@ -446,7 +447,7 @@ AC_ARG_WITH(driver,
srm7500libusb, tekram,
tekram_bt829, tira, tira_raw, ttusbir,
tuxbox, tvbox, udp, uirt2, uirt2_raw,
- usb_uirt_raw, usbx, wpc8769l, zotac],
+ usb_uirt_raw, usb_irtoy, usbx, wpc8769l, zotac],
driver=${withval},
driver="unset"
)
@@ -680,6 +681,9 @@ if test "$driver" = "userspace" -o "$driver" = "all"; then
uirt2_raw|usb_uirt_raw)
hw_module="${hw_module} hw_uirt2_raw.o hw_uirt2_common.o serial.o receive.o transmit.o"
;;
+ usb_irtoy)
+ hw_module="${hw_module} hw_usbirtoy.o serial.o receive.o transmit.o"
+ ;;
usbx)
hw_module="${hw_module} hw_usbx.o serial.o"
;;
@@ -1391,6 +1395,11 @@ if test "$driver" = "uirt2_raw"; then
hw_module="hw_uirt2_raw.o hw_uirt2_common.o serial.o receive.o transmit.o"
HW_DEFAULT="hw_uirt2_raw"
fi
+if test "$driver" = "usb_irtoy"; then
+ lirc_driver="none"
+ hw_module="hw_usbirtoy.o serial.o receive.o transmit.o"
+ HW_DEFAULT="hw_usbirtoy"
+fi
if test "$driver" = "usb_uirt_raw"; then
lirc_driver="none"
hw_module="hw_uirt2_raw.o hw_uirt2_common.o serial.o receive.o transmit.o"
diff --git c/daemons/hw-types.c w/daemons/hw-types.c
index 0536ea2..b11cbdf 100644
--- c/daemons/hw-types.c
+++ w/daemons/hw-types.c
@@ -58,6 +58,7 @@ extern struct hardware hw_udp;
extern struct hardware hw_uirt2;
extern struct hardware hw_uirt2_raw;
extern struct hardware hw_usb_uirt_raw;
+extern struct hardware hw_usbirtoy;
extern struct hardware hw_usbx;
#ifndef HW_DEFAULT
diff --git c/daemons/hw_usbirtoy.c w/daemons/hw_usbirtoy.c
new file mode 100644
index 0000000..ed2df85
--- /dev/null
+++ w/daemons/hw_usbirtoy.c
@@ -0,0 +1,607 @@
+/****************************************************************************
+ ** hw_usbirtoy.c **********************************************************
+ ****************************************************************************
+ *
+ * Routines for USB Infrared Toy receiver/transmitter in sampling mode
+ *
+ * Copyright (C) 2011 Peter Kooiman <pkooiman@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Library General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifdef HAVE_CONFIG_H
+ #include <config.h>
+#endif
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <limits.h>
+#include <signal.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <sys/ioctl.h>
+#include <errno.h>
+
+
+#include "hardware.h"
+#include "serial.h"
+#include "ir_remote.h"
+#include "lircd.h"
+#include "receive.h"
+#include "transmit.h"
+
+#define IRTOY_MINFWVERSION 20
+
+#define IRTOY_UNIT 21.3333
+#define IRTOY_LONGSPACE 1000000
+
+
+const unsigned char IRTOY_COMMAND_TXSTART[] = {0x24, 0x25, 0x26, 0x03};
+#define IRTOY_COMMAND_RESET 0
+#define IRTOY_COMMAND_SMODE_ENTER 's'
+#define IRTOY_COMMAND_VERSION 'v'
+
+#define IRTOY_REPLY_XMITCOUNT 't'
+#define IRTOY_REPLY_XMITSUCCESS 'C'
+#define IRTOY_REPLY_VERSION 'V'
+#define IRTOY_REPLY_SAMPLEMODEPROTO 'S'
+
+#define IRTOY_LEN_XMITRES 4
+#define IRTOY_LEN_VERSION 4
+#define IRTOY_LEN_SAMPLEMODEPROTO 3
+
+#define IRTOY_TIMEOUT_READYFORDATA 1000000
+#define IRTOY_TIMEOUT_FLUSH 20000
+#define IRTOY_TIMEOUT_SMODE_ENTER 500000
+#define IRTOY_TIMEOUT_VERSION 500000
+
+
+struct tag_irtoy_t {
+ int hwVersion;
+ int swVersion;
+ int protoVersion;
+ int fd;
+ int awaitingNewSig;
+ int pulse;
+};
+
+typedef struct tag_irtoy_t irtoy_t;
+
+static irtoy_t *dev;
+
+unsigned char rawSB[WBUF_SIZE * 2 + 2];
+
+/* exported functions */
+static int irtoy_init(void);
+static int irtoy_deinit(void);
+static int irtoy_send(struct ir_remote *remote, struct ir_ncode *code);
+static char *irtoy_rec(struct ir_remote *remotes);
+static int irtoy_decode(struct ir_remote *remote, ir_code * prep, ir_code * codep, ir_code * postp,
+ int *repeat_flagp, lirc_t * min_remaining_gapp, lirc_t * max_remaining_gapp);
+static lirc_t irtoy_readdata(lirc_t timeout);
+
+
+struct hardware hw_usbirtoy = {
+#ifndef LIRC_IRTTY
+ "/dev/ttyACM0",
+#else
+ LIRC_IRTTY, /* default device */
+#endif
+ -1, /* fd */
+ LIRC_CAN_REC_MODE2 | LIRC_CAN_SEND_PULSE, /* features */
+ LIRC_MODE_PULSE, /* send_mode */
+ LIRC_MODE_MODE2, /* rec_mode */
+ 0, /* code_length */
+ irtoy_init, /* init_func */
+ irtoy_deinit, /* deinit_func */
+ irtoy_send, /* send_func */
+ irtoy_rec, /* rec_func */
+ irtoy_decode, /* decode_func */
+ NULL, /* ioctl_func */
+ irtoy_readdata, /* readdata */
+ "usb_irtoy"
+};
+
+
+static int irtoy_decode(struct ir_remote *remote, ir_code * prep, ir_code * codep, ir_code * postp,
+ int *repeat_flagp, lirc_t * min_remaining_gapp, lirc_t * max_remaining_gapp)
+{
+ int res;
+
+ LOGPRINTF(1, "irtoy_decode: enter");
+
+ res = receive_decode(remote, prep, codep, postp, repeat_flagp, min_remaining_gapp, max_remaining_gapp);
+
+ LOGPRINTF(1, "irtoy_decode: %d", res);
+
+ return res;
+}
+
+
+
+
+static ssize_t read_with_timeout(int fd, void *buf, size_t count, long to_usec)
+{
+ ssize_t rc;
+ size_t numread = 0;
+ struct timeval timeout;
+ fd_set fds;
+
+ timeout.tv_sec = 0;
+ timeout.tv_usec = to_usec;
+
+ rc = read(fd, (char *) buf, count);
+
+ if (rc > 0) {
+ numread += rc;
+ }
+
+ while ((rc == -1 && errno == EAGAIN) || (rc >= 0 && numread < count)) {
+ FD_ZERO(&fds);
+ FD_SET(fd, &fds);
+
+ rc = select(fd + 1, &fds, NULL, NULL, &timeout);
+
+ if (rc == 0) {
+ /* timeout */
+ break;
+ } else if (rc == -1) {
+ /* continue for EAGAIN case */
+ continue;
+ }
+
+ rc = read(fd, ((char *)buf) + numread, count - numread);
+
+ if (rc > 0) {
+ numread += rc;
+ }
+
+ }
+
+ return(numread == 0) ? -1 : numread;
+}
+
+
+static int irtoy_readflush(irtoy_t * dev, long timeout)
+{
+ int res;
+ char c;
+
+ while ((res = read_with_timeout(dev->fd, &c, 1, timeout)) == 1)
+ ;
+
+ if (res != 0)
+ return -1;
+ else
+ return 0;
+}
+
+static lirc_t irtoy_read(irtoy_t * dev, lirc_t timeout)
+{
+
+ lirc_t data;
+ int res;
+ unsigned char dur[2];
+
+ if (!waitfordata(timeout))
+ return 0;
+
+ // lircd expects a space as start of the next transmission, not just at the end of the last one
+ // irrecord however likes to see a space at the end of the signal
+ // We remember if we saw the 0xFFFF timeout from the usbtoy and send a long space both after last signal and at start of next signal
+ // From usb irtoy: <signal...><lastpulse> [usbtoy timeout duration] 0xFFFF [however long it takes before next signal] <firstpulse><signal..>
+ // We return: <signal><lastpulse> [usbtoy timeout duration] LONGSPACE [however long it takes before next signal] LONGSPACE <firstpulse><signal>
+ if (dev->awaitingNewSig) {
+
+ LOGPRINTF(1, "new signal after large space");
+ dev->pulse = 1;
+ dev->awaitingNewSig = 0;
+ return IRTOY_LONGSPACE;
+ }
+
+ res = read_with_timeout(dev->fd, dur, 2, 0);
+
+ if (res != 2) {
+ logprintf(LOG_ERR, "irtoy_read: could not get 2 bytes");
+ return 0;
+ }
+
+
+
+ LOGPRINTF(3, "read_raw %02x%02x", dur[0], dur[1]);
+
+
+ if (dur[0] == 0xff && dur[1] == 0xff) {
+ dev->awaitingNewSig = 1;
+ return IRTOY_LONGSPACE;
+ }
+
+
+ data = (lirc_t) (IRTOY_UNIT * (double) (256 * dur[0] + dur[1]));
+
+ LOGPRINTF(3, "read_raw %d", data);
+
+
+ if (dev->pulse) {
+ data = data | PULSE_BIT;
+ }
+
+ dev->pulse = ! (dev->pulse);
+
+
+ return data;
+}
+
+static lirc_t irtoy_readdata(lirc_t timeout)
+{
+ lirc_t data = irtoy_read(dev, timeout);
+
+ if (data) {
+ LOGPRINTF(1, "irtoy_readdata %d %d", !!(data & PULSE_BIT), data & PULSE_MASK);
+
+ }
+
+ return(data);
+}
+
+static int irtoy_getversion(irtoy_t *dev)
+{
+ int res;
+ unsigned char buf[16];
+ int vNum;
+
+ irtoy_readflush(dev, IRTOY_TIMEOUT_FLUSH);
+
+
+ buf[0] = IRTOY_COMMAND_VERSION;
+ res = write(dev->fd, buf, 1);
+
+ if (res != 1) {
+ logprintf(LOG_ERR, "irtoy_getversion: couldn't write command");
+ return 0;
+ }
+
+
+ res = read_with_timeout(dev->fd, buf, IRTOY_LEN_VERSION, IRTOY_TIMEOUT_VERSION);
+
+ if (res != IRTOY_LEN_VERSION) {
+ logprintf(LOG_ERR, "irtoy_getversion: couldn't read version");
+ logprintf(LOG_ERR, "please make sure you are using firmware v20 or higher");
+ return 0;
+ }
+
+ buf[IRTOY_LEN_VERSION] = 0;
+
+ LOGPRINTF(1, "irtoy_getversion: Got version %s", buf);
+
+ if (buf[0] != IRTOY_REPLY_VERSION) {
+ logprintf(LOG_ERR, "irtoy_getversion: invalid response %02X", buf[0]);
+ logprintf(LOG_ERR, "please make sure you are using firmware v20 or higher");
+ return 0;
+ }
+
+ vNum = atoi(buf + 1);
+ dev->hwVersion = vNum / 100;
+ dev->swVersion = vNum % 100;
+ return 1;
+}
+
+static int irtoy_reset(irtoy_t *dev)
+{
+ int res;
+ unsigned char buf[16];
+
+ buf[0] = IRTOY_COMMAND_RESET;
+ res = write(dev->fd, buf, 1);
+
+ if (res != 1) {
+ logprintf(LOG_ERR, "irtoy_reset: couldn't write command");
+ return 0;
+ }
+
+ irtoy_readflush(dev, IRTOY_TIMEOUT_FLUSH);
+
+ return 1;
+}
+
+static int irtoy_enter_samplemode(irtoy_t *dev)
+{
+
+ int res;
+ unsigned char buf[16];
+
+ buf[0] = IRTOY_COMMAND_SMODE_ENTER;
+ res = write(dev->fd, buf, 1);
+
+ if (res != 1) {
+ logprintf(LOG_ERR, "irtoy_enter_samplemode: couldn't write command");
+ return 0;
+ }
+
+
+ res = read_with_timeout(dev->fd, buf, IRTOY_LEN_SAMPLEMODEPROTO, IRTOY_TIMEOUT_SMODE_ENTER);
+
+ if (res != IRTOY_LEN_SAMPLEMODEPROTO) {
+ logprintf(LOG_ERR, "irtoy_enter_samplemode: couldn't read command result");
+ return 0;
+ }
+
+ buf[IRTOY_LEN_SAMPLEMODEPROTO] = 0;
+
+ if (buf[0] != IRTOY_REPLY_SAMPLEMODEPROTO) {
+ logprintf(LOG_ERR, "irtoy_enter_samplemode: invalid response %02X", buf[0]);
+ return 0;
+ }
+
+
+ LOGPRINTF(1, "irtoy_reset: Got protocol %s", buf);
+
+ dev->protoVersion = atoi(buf + 1);
+ return 1;
+}
+
+
+static irtoy_t *irtoy_hw_init(int fd)
+{
+
+
+ irtoy_t *dev = (irtoy_t *) malloc(sizeof(irtoy_t));
+
+ if (dev == NULL) {
+ logprintf(LOG_ERR, "irtoy_init: out of memory");
+ return NULL;
+ }
+
+ memset(dev, 0, sizeof(irtoy_t));
+
+ dev->awaitingNewSig = 1;
+ dev->fd = fd;
+ dev->pulse = 1;
+
+ irtoy_readflush(dev, IRTOY_TIMEOUT_FLUSH);
+
+ if (!irtoy_reset(dev) || !irtoy_getversion(dev) || !irtoy_enter_samplemode(dev)) {
+ free(dev);
+ dev = NULL;
+ return NULL;
+ }
+
+ return dev;
+}
+
+
+
+
+static int irtoy_init(void)
+{
+
+
+
+ if (!tty_create_lock(hw.device)) {
+ logprintf(LOG_ERR, "usb_irtoy: could not create lock files");
+ return(0);
+ }
+
+ if ((hw.fd = open(hw.device, O_RDWR | O_NONBLOCK | O_NOCTTY)) < 0) {
+ logprintf(LOG_ERR, "usb_irtoy: could not open %s", hw.device);
+ tty_delete_lock();
+ return(0);
+ }
+
+ if (!tty_reset(hw.fd)) {
+ logprintf(LOG_ERR, "usb_irtoy: could not reset tty");
+ close(hw.fd);
+ tty_delete_lock();
+ return(0);
+ }
+
+
+ if (!tty_setbaud(hw.fd, 115200)) {
+ logprintf(LOG_ERR, "usb_irtoy: could not set baud rate");
+ close(hw.fd);
+ tty_delete_lock();
+ return(0);
+ }
+
+ if (!tty_setcsize(hw.fd, 8)) {
+ logprintf(LOG_ERR, "usb_irtoy: could not set csize");
+ close(hw.fd);
+ tty_delete_lock();
+ return(0);
+ }
+
+ if (!tty_setrtscts(hw.fd, 1)) {
+ logprintf(LOG_ERR, "usb_irtoy: could not enable hardware flow");
+ close(hw.fd);
+ tty_delete_lock();
+ return(0);
+ }
+
+ if ((dev = irtoy_hw_init(hw.fd)) == NULL) {
+ logprintf(LOG_ERR, "usb_irtoy: No USB Irtoy device found at %s", hw.device);
+ close(hw.fd);
+ tty_delete_lock();
+ return(0);
+ }
+
+ LOGPRINTF(1, "Version hw %d, sw %d, protocol %d\n", dev->hwVersion, dev->swVersion, dev->protoVersion);
+
+ if (dev->swVersion < IRTOY_MINFWVERSION) {
+ logprintf(LOG_ERR, "usb_irtoy: Need firmware V%02d or higher, this firmware: %02d", IRTOY_MINFWVERSION, dev->swVersion);
+ free(dev);
+ return 0;
+ }
+
+ init_rec_buffer();
+ init_send_buffer();
+
+
+
+ return(1);
+}
+
+static int irtoy_deinit(void)
+{
+
+ // IMPORTANT do not remove this reset. it is vital to return the irtoy to IRMAN mode.
+ // If we leave the irtoy in sample mode while no-one has the tty open, the linux cdc_acm driver will fail on the next open.
+ // This is apparently due to data being sent while the tty is not open and fairly well known (google for "tty_port_close_start: tty->count = 1 port count = 0")
+ // IRMAN mode will wait until a signal is actually read before sending the next one, while sample mode will keep streaming (and under fluorescent light it WILL stream..)
+ // triggering the problem
+ irtoy_reset(dev);
+
+ free(dev);
+ dev = NULL;
+
+
+ close(hw.fd);
+ hw.fd = -1;
+ tty_delete_lock();
+ return 1;
+}
+
+static char *irtoy_rec(struct ir_remote *remotes)
+{
+ LOGPRINTF(1, "irtoy_raw_rec");
+
+
+ if (!clear_rec_buffer())
+ return(NULL);
+
+ return decode_all(remotes);
+
+
+}
+
+static int irtoy_send_double_buffered(unsigned char * signals, int length)
+{
+ int numToXmit = length;
+ int numThisTime;
+ int res;
+ unsigned char irToyBufLen;
+ unsigned char *txPtr;
+ unsigned char reply[16];
+ int irtoyXmit;
+
+
+ res = write(dev->fd, IRTOY_COMMAND_TXSTART, sizeof(IRTOY_COMMAND_TXSTART));
+
+ if (res != sizeof(IRTOY_COMMAND_TXSTART)) {
+ logprintf(LOG_ERR, "irtoy_send: couldn't write command");
+ return 0;
+ }
+
+ res = read_with_timeout(dev->fd, &irToyBufLen, 1, IRTOY_TIMEOUT_READYFORDATA);
+
+ if (res != 1) {
+ logprintf(LOG_ERR, "irtoy_send: couldn't read command result");
+ return -1;
+ }
+
+ LOGPRINTF(1, "irtoy ready for %d bytes\n", irToyBufLen);
+
+ txPtr = signals;
+
+ while (numToXmit) {
+ numThisTime = (numToXmit < irToyBufLen) ? numToXmit : irToyBufLen;
+ res = write(dev->fd, txPtr, numThisTime);
+
+ if (res != numThisTime) {
+ logprintf(LOG_ERR, "irtoy_send: couldn't write command");
+ return 0;
+ }
+
+ txPtr += numThisTime;
+ numToXmit -= numThisTime;
+
+
+ res = read_with_timeout(dev->fd, &irToyBufLen, 1, IRTOY_TIMEOUT_READYFORDATA);
+
+ if (res != 1) {
+ logprintf(LOG_ERR, "irtoy_send: couldn't read command result");
+ return -1;
+ }
+
+ LOGPRINTF(1, "irtoy ready for %d bytes\n", irToyBufLen);
+
+
+ }
+
+
+ res = read_with_timeout(dev->fd, reply, IRTOY_LEN_XMITRES, IRTOY_TIMEOUT_READYFORDATA);
+
+ if (res != IRTOY_LEN_XMITRES) {
+ logprintf(LOG_ERR, "irtoy_send: couldn't read command result");
+ return -1;
+ }
+
+ LOGPRINTF(1, "%c %02X %02X %c\n", reply[0], reply[1], reply[2], reply[3]);
+
+ if (reply[0] != IRTOY_REPLY_XMITCOUNT) {
+ logprintf(LOG_ERR, "irtoy_send: invalid byte count indicator received: %02X", reply[0]);
+ return 0;
+ }
+
+ irtoyXmit = (reply[1] << 8) | reply[2];
+ if (length != irtoyXmit) {
+ logprintf(LOG_ERR, "irtoy_send: incorrect byte count received: %d expected: %d", irtoyXmit, length);
+ return 0;
+ }
+
+ if (reply[3] != IRTOY_REPLY_XMITSUCCESS) {
+ logprintf(LOG_ERR, "irtoy_send: received error status %02X", reply[3]);
+ return 0;
+ }
+
+ return 1;
+
+}
+
+static int irtoy_send(struct ir_remote *remote, struct ir_ncode *code)
+{
+ int length;
+ lirc_t *signals;
+ int res = 0;
+
+ int numToXmit;
+ int i;
+ lirc_t val;
+
+
+ if (!init_send(remote, code)) {
+ return 0;
+ }
+
+ length = send_buffer.wptr;
+ signals = send_buffer.data;
+
+ for (i = 0; i < length; i++) {
+ val = (lirc_t)(((double) signals[i]) / IRTOY_UNIT);
+ rawSB[2*i] = val >> 8;
+ rawSB[2*i + 1] = val & 0xFF;
+ }
+
+ rawSB[2 * length] = 0xFF;
+ rawSB[2 * length + 1] = 0xFF;
+
+ numToXmit = 2 * length + 2;
+ return irtoy_send_double_buffered(rawSB, numToXmit);
+}
+
+
diff --git c/setup.data w/setup.data
index 407d6b2..99be615 100644
--- c/setup.data
+++ w/setup.data
@@ -119,6 +119,7 @@ hw_menu_entry: @hw-usb
awlibusb: "Awox RF/IR Remote (userspace)"
sb0540: "Creative USB IR Receiver (SB0540)"
commandir: "CommandIR Multi-IR Transceiver (userspace)"
+ usb_irtoy: "Dangerous Prototypes USB Infrared Toy"
dfclibusb: "DFC USB InfraRed Remote Control (userspace)"
sasem: "Dign HV5 HTPC IR/VFD Module"
dvico: "DViCO USB Remote"
@@ -147,6 +148,7 @@ hw_menu_entry: @hw-usb
mplay: "VLSystem MPlay Blast"
mplay: "VLSystem MPlay Mini"
+
param_type: \
act200l \
act220l \
@@ -190,6 +192,9 @@ param_type: \
usbx
ttyUSB:
+param_type: usb_irtoy
+ ttyACM:
+
param_type: \
adaptec \
alsa_usb \
@@ -390,6 +395,10 @@ default_param: \
usbx
ttyUSB1:
+default_param: usb_irtoy
+ ttyACM1:
+
+
remote: \
hauppauge \
hauppauge_dvb \
@@ -424,6 +433,7 @@ remote: \
ttusbir \
uirt2_raw \
udp \
+ usb_irtoy \
usb_uirt_raw \
wpc8769l
any:
diff --git c/setup.sh w/setup.sh
index 342f32d..a3546b5 100755
--- c/setup.sh
+++ w/setup.sh
@@ -65,6 +65,10 @@ GetSelectedDriver ()
elif test "$DRIVER_PARAMETER" = "ttyUSB2"; then COM2="on"; IRTTY="/dev/ttyUSB1"; LIRC_PORT="none"; LIRC_IRQ="none"
elif test "$DRIVER_PARAMETER" = "ttyUSB3"; then COM3="on"; IRTTY="/dev/ttyUSB2"; LIRC_PORT="none"; LIRC_IRQ="none"
elif test "$DRIVER_PARAMETER" = "ttyUSB4"; then COM4="on"; IRTTY="/dev/ttyUSB3"; LIRC_PORT="none"; LIRC_IRQ="none"
+ elif test "$DRIVER_PARAMETER" = "ttyACM1"; then COM1="on"; IRTTY="/dev/ttyACM0"; LIRC_PORT="none"; LIRC_IRQ="none"
+ elif test "$DRIVER_PARAMETER" = "ttyACM2"; then COM2="on"; IRTTY="/dev/ttyACM1"; LIRC_PORT="none"; LIRC_IRQ="none"
+ elif test "$DRIVER_PARAMETER" = "ttyACM3"; then COM3="on"; IRTTY="/dev/ttyACM2"; LIRC_PORT="none"; LIRC_IRQ="none"
+ elif test "$DRIVER_PARAMETER" = "ttyACM4"; then COM4="on"; IRTTY="/dev/ttyACM3"; LIRC_PORT="none"; LIRC_IRQ="none"
elif test "$DRIVER_PARAMETER" = "com1"; then COM1="on"; LIRC_PORT=$COM1_PORT; LIRC_IRQ=$COM1_IRQ
elif test "$DRIVER_PARAMETER" = "com2"; then COM2="on"; LIRC_PORT=$COM2_PORT; LIRC_IRQ=$COM2_IRQ
elif test "$DRIVER_PARAMETER" = "com3"; then COM3="on"; LIRC_PORT=$COM3_PORT; LIRC_IRQ=$COM3_IRQ
@@ -207,6 +211,30 @@ SetPortAndIrq ()
else
return 1;
fi
+ elif test "$DRIVER_PARAM_TYPE" = "ttyACM"; then
+ {
+ dialog --clear --backtitle "$BACKTITLE" \
+ --title "Select tty to use" \
+ --radiolist "$SET_TTY_TEXT" 13 74 6 \
+ 1 "/dev/ttyACM0" $COM1 \
+ 2 "/dev/ttyACM1" $COM2 \
+ 3 "/dev/ttyACM2" $COM3 \
+ 4 "/dev/ttyACM3" $COM4 \
+ 2> $TEMP
+ }
+ if test "$?" = "0"; then
+ {
+ set `cat $TEMP`
+ if test "$1" = "1"; then DRIVER_PARAMETER="ttyACM1"
+ elif test "$1" = "2"; then DRIVER_PARAMETER="ttyACM2"
+ elif test "$1" = "3"; then DRIVER_PARAMETER="ttyACM3"
+ elif test "$1" = "4"; then DRIVER_PARAMETER="ttyACM4"
+ fi
+ GetSelectedDriver
+ }
+ else
+ return 1;
+ fi
fi
return 0;
}
@@ -347,7 +375,7 @@ SaveConfig ()
else echo "--without-timer \\" >>$START;
fi
}
- elif test "$DRIVER_PARAM_TYPE" = "tty" -o "$DRIVER_PARAM_TYPE" = "ttyUSB" -o "$LIRC_DRIVER" = "bte"; then
+ elif test "$DRIVER_PARAM_TYPE" = "tty" -o "$DRIVER_PARAM_TYPE" = "ttyUSB" -o "$DRIVER_PARAM_TYPE" = "ttyACM" -o "$LIRC_DRIVER" = "bte"; then
{
echo "--with-tty=$IRTTY \\" >>$START
}