# Copyright 1999-2014 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/app-misc/lirc/lirc-0.9.0-r5.ebuild,v 1.3 2014/03/05 15:18:20 ago Exp $
EAPI=4
inherit eutils linux-mod linux-info systemd toolchain-funcs flag-o-matic autotools
DESCRIPTION="decode and send infra-red signals of many commonly used remote controls"
HOMEPAGE="http://www.lirc.org/"
MY_P=${PN}-${PV/_/}
if [[ "${PV/_pre/}" = "${PV}" ]]; then
SRC_URI="mirror://sourceforge/lirc/${MY_P}.tar.bz2"
else
SRC_URI="http://www.lirc.org/software/snapshots/${MY_P}.tar.bz2"
fi
LICENSE="GPL-2"
SLOT="0"
KEYWORDS="amd64 ppc ~ppc64 ~x86"
IUSE="debug doc hardware-carrier transmitter static-libs X"
S="${WORKDIR}/${MY_P}"
RDEPEND="
X? (
x11-libs/libX11
x11-libs/libSM
x11-libs/libICE
)
lirc_devices_alsa_usb? ( media-libs/alsa-lib )
lirc_devices_audio? ( >media-libs/portaudio-18 )
lirc_devices_irman? ( media-libs/libirman )"
# 2012-07-17, Ian Stakenvicius
# A helper script that scrapes out values for nearly all of the variables below
# from lirc's configure.ac is available at
# http://dev.gentoo.org/~axs/helper-for-lirc-iuse.sh
# This are drivers with names matching the
# parameter --with-driver=NAME
IUSE_LIRC_DEVICES_DIRECT="
all userspace accent act200l act220l
adaptec alsa_usb animax asusdh atilibusb
atiusb audio audio_alsa avermedia avermedia_vdomate
avermedia98 awlibusb bestbuy bestbuy2 breakoutbox
bte bw6130 caraca chronos commandir
cph06x creative creative_infracd
devinput digimatrix dsp dvico ea65 ene0100
exaudio flyvideo ftdi gvbctv5pci hauppauge
hauppauge_dvb hercules_smarttv_stereo i2cuser
igorplugusb iguanaIR imon imon_24g imon_knob
imon_lcd imon_pad imon_rsc irdeo irdeo_remote
irlink irman irreal it87 ite8709
knc_one kworld leadtek_0007 leadtek_0010
leadtek_pvr2000 livedrive_midi
livedrive_seq logitech macmini
mediafocusI mouseremote
mouseremote_ps2 mp3anywhere mplay nslu2
packard_bell parallel pcmak pcmak_usb
pctv pixelview_bt878 pixelview_pak
pixelview_pro provideo realmagic
remotemaster sa1100 samsung sasem sb0540 serial
silitek sir slinke streamzap tekram
tekram_bt829 tira ttusbir tuxbox tvbox udp uirt2
uirt2_raw usb_irtoy usb_uirt_raw usbx wpc8769l zotac"
# drivers that need special handling and
# must have another name specified for
# parameter --with-driver=NAME
IUSE_LIRC_DEVICES_SPECIAL="
serial_igor_cesko
remote_wonder_plus xboxusb usbirboy inputlirc"
IUSE_LIRC_DEVICES="${IUSE_LIRC_DEVICES_DIRECT} ${IUSE_LIRC_DEVICES_SPECIAL}"
# The following are lists which are used to provide ewarns on incompatibilities
# with the kernel:
#drivers that do not build kernel modules
NO_KMOD_BUILT_FOR_DEV="
accent bte creative creative_infracd devinput dsp ea65 exaudio
ftdi i2cuser irlink irreal livedrive_midi livedrive_seq logitech
mediafocusI mouseremote mouseremote_ps2 mp3anywhere mplay mplay2
pcmak pcmak_usb pctv realmagic remotemaster silitek tira tira_raw
tuxbox udp uirt2 uirt2_raw usb_irtoy usb_uirt_raw usbx"
#drivers that build lirc_dev and so will conflict with kernel lirc_dev
LIRCDEV_BUILT_FOR_DEV="all
act200l act220l adaptec animax atiusb breakoutbox hauppauge
hauppauge_dvb hercules_smarttv_stereo igorplugusb imon imon_24g
imon_knob imon_lcd imon_pad imon_rsc irdeo irdeo_remote knc_one
leadtek_pvr2000 nslu2 packard_bell parallel pixelview_bt878
provideo sa1100 sasem serial sir tekram tekram_bt829 ttusbir
tvbox wpc8769l zotac"
#lirc_gpio drivers, which cannot be supported on kernel >= 2.6.22
LIRC_GPIO_DEV="
avermedia avermedia98 avermedia_vdomate bestbuy bestbuy2 chronos
cph03x cph06x flyvideo gvbctv5pci kworld leadtek_0007 leadtek_0010
pixelview_pak pixelview_pro"
#device-driver which use libusb
LIBUSB_USED_BY_DEV="
all atilibusb awlibusb sasem igorplugusb imon imon_lcd imon_pad
imon_rsc streamzap xboxusb irlink commandir"
for dev in ${LIBUSB_USED_BY_DEV}; do
DEPEND="${DEPEND} lirc_devices_${dev}? ( virtual/libusb:0 )"
done
# adding only compile-time depends
DEPEND="${RDEPEND} ${DEPEND}
virtual/linux-sources
lirc_devices_ftdi? ( dev-embedded/libftdi )
lirc_devices_all? ( dev-embedded/libftdi )"
# adding only run-time depends
RDEPEND="${RDEPEND}
lirc_devices_usbirboy? ( app-misc/usbirboy )
lirc_devices_inputlirc? ( app-misc/inputlircd )
lirc_devices_iguanaIR? ( app-misc/iguanaIR )"
# add all devices to IUSE
# and ensure lirc_devices_all is not set alongside lirc_devices_*
REQUIRED_USE="lirc_devices_all? ("
for dev in ${IUSE_LIRC_DEVICES}; do
IUSE="${IUSE} lirc_devices_${dev}"
if [[ "${dev}" != "all" ]]; then
REQUIRED_USE="${REQUIRED_USE} !lirc_devices_${dev}"
fi
done
REQUIRED_USE="${REQUIRED_USE} )"
add_device() {
local dev="${1}"
local desc="device ${dev}"
if [[ -n "${2}" ]]; then
desc="${2}"
fi
# Bug #187418
if kernel_is ge 2 6 22 && [[ " ${LIRC_GPIO_DEV} " == *" ${dev} "* ]]; then
eerror "${desc} uses lirc_gpio which fails with kernel 2.6.22 or above. Not building."
eerror "Use 'devinput' instead, or use 'userspace' along with in-kernel drivers"
return 0
fi
: ${lirc_device_count:=0}
((lirc_device_count++))
elog "Compiling support for ${desc}"
if [[ " ${LIRCDEV_BUILT_FOR_DEV} " == *" ${dev} "* ]] ; then
if linux_chkconfig_present LIRC ; then
ewarn "${desc} builds lirc_dev and CONFIG_LIRC is set in the kernel -- this may conflict."
fi
if ! linux_chkconfig_present MODULE_UNLOAD ; then
ewarn "${desc} builds modules and CONFIG_MODULE_UNLOAD is unset in kernel."
ewarn "You will need MODULE_UNLOAD support in your kernel."
fi
fi
if [[ " ${NO_KMOD_BUILT_FOR_DEV} " == *" ${dev} "* ]] && ! linux_chkconfig_present IR_LIRC_CODEC ; then
ewarn "${desc} builds no kernel module and CONFIG_IR_LIRC_CODEC is unset in kernel."
fi
if [[ ${lirc_device_count} -eq 2 ]] ; then
ewarn
ewarn "LIRC_DEVICES has more than one entry."
ewarn "When selecting multiple devices for lirc to be supported,"
ewarn "it can not be guaranteed that the drivers play nice together."
ewarn "If this is not intended, then please adjust LIRC_DEVICES"
ewarn "and re-emerge."
ewarn
fi
MY_OPTS="${MY_OPTS} --with-driver=${dev}"
}
pkg_pretend() {
if [[ -n "${LIRC_OPTS}" ]] ; then
ewarn
ewarn "LIRC_OPTS is deprecated from lirc-0.8.0-r1 on."
ewarn
ewarn "Please use LIRC_DEVICES from now on."
ewarn "e.g. LIRC_DEVICES=\"serial sir\""
ewarn
ewarn "Flags are now set per use-flags."
ewarn "e.g. transmitter, hardware-carrier"
local opt
local unsupported_opts=""
# test for allowed options for LIRC_OPTS
for opt in ${LIRC_OPTS}; do
case ${opt} in
--with-port=*|--with-irq=*|--with-timer=*|--with-tty=*)
MY_OPTS="${MY_OPTS} ${opt}"
;;
*)
unsupported_opts="${unsupported_opts} ${opt}"
;;
esac
done
if [[ -n ${unsupported_opts} ]]; then
eerror "These options are no longer allowed to be set"
eerror "with LIRC_OPTS: ${unsupported_opts}"
die "LIRC_OPTS is no longer supported, use LIRC_DEVICES."
fi
fi
}
pkg_setup() {
linux-mod_pkg_setup
# set default configure options
MY_OPTS=""
LIRC_DRIVER_DEVICE="/dev/lirc0"
if use lirc_devices_all; then
# compile in drivers for a lot of devices
add_device all "a lot of devices"
else
# compile in only requested drivers
local dev
for dev in ${IUSE_LIRC_DEVICES_DIRECT}; do
if use lirc_devices_${dev}; then
add_device ${dev}
fi
done
if use lirc_devices_remote_wonder_plus; then
add_device atiusb "device Remote Wonder Plus (atiusb-based)"
fi
if use lirc_devices_serial_igor_cesko; then
add_device serial "serial with Igor Cesko design"
MY_OPTS="${MY_OPTS} --with-igor"
fi
if use lirc_devices_imon_pad; then
ewarn "The imon_pad driver has incorporated the previous pad2keys patch"
ewarn "and removed the pad2keys_active option for the lirc_imon module"
ewarn "because it is always active."
ewarn "If you have an older imon VFD device, you may need to add the module"
ewarn "option display_type=1 to override autodetection and force VFD mode."
fi
if use lirc_devices_xboxusb; then
add_device atiusb "device xboxusb"
fi
if use lirc_devices_usbirboy; then
add_device userspace "device usbirboy"
LIRC_DRIVER_DEVICE="/dev/usbirboy"
fi
if [[ "${MY_OPTS}" == "" ]]; then
if [[ "${PROFILE_ARCH}" == "xbox" ]]; then
# on xbox: use special driver
add_device atiusb "device xboxusb"
else
# no driver requested
elog
elog "Compiling only the lirc-applications, but no drivers."
elog "Enable drivers with LIRC_DEVICES if you need them."
MY_OPTS="--with-driver=none"
fi
fi
fi
use hardware-carrier && MY_OPTS="${MY_OPTS} --without-soft-carrier"
use transmitter && MY_OPTS="${MY_OPTS} --with-transmitter"
einfo
einfo "lirc-configure-opts: ${MY_OPTS}"
elog "Setting default lirc-device to ${LIRC_DRIVER_DEVICE}"
filter-flags -Wl,-O1
}
src_prepare() {
# Rip out dos CRLF
edos2unix contrib/lirc.rules
# Apply patches needed for some special device-types
use lirc_devices_audio || epatch "${FILESDIR}"/lirc-0.8.4-portaudio_check.patch
use lirc_devices_remote_wonder_plus && epatch "${FILESDIR}"/lirc-0.8.3_pre1-remotewonderplus.patch
use lirc_devices_usb_irtoy && epatch "${FILESDIR}"/lirc-0.9.0-usb_irtoy.patch
# Apply fixes for kernel-2.6.39 and above
epatch "${FILESDIR}"/${P}-kernel-2.6.39-fixes.patch
# Slightly massaged upstream patch to fix kfifo issues >=2.6.38
# for bug 377033
epatch "${FILESDIR}"/${P}-atiusb_kfifo.patch
# Apply fixes for kernel-3.3 and above (bug 439538)
epatch "${FILESDIR}"/${P}-kernel-3.3.0-fixes.patch
# Apply fix for missing err() in usb.h for kernel 3.5+ (bug 444736)
epatch "${FILESDIR}"/${P}-kernel-3.5-err-fix.patch
# Apply fix for missing __devinit __devexit defines in kernel 3.8+ (bug 461532)
epatch "${FILESDIR}"/${P}-kernel-3.8-fixes.patch
# Add support for zotac remote, bug 342848
use lirc_devices_zotac && epatch "${FILESDIR}"/${P}-add-zotac-support.patch
# Use fixed font
epatch "${FILESDIR}"/${P}-fixed-font.patch
# Do not build drivers from the top-level Makefile
sed -i -e 's:\(SUBDIRS =\) drivers\(.*\):\1\2:' Makefile.am
# remove parallel driver on SMP systems
if linux_chkconfig_present SMP ; then
sed -i -e "s:lirc_parallel\.o::" drivers/lirc_parallel/Makefile.am
fi
# Bug #187418 - only need this part for lirc_devices_all as others die in pkg_setup
if use lirc_devices_all && kernel_is ge 2 6 22 ; then
ewarn "Disabling lirc_gpio driver as it does no longer work Kernel 2.6.22+"
sed -i -e "s:lirc_gpio\.o::" drivers/lirc_gpio/Makefile.am
fi
# respect CFLAGS
sed -i -e 's:CFLAGS="-O2:CFLAGS=""\n#CFLAGS="-O2:' configure.ac
# setting default device-node
local f
for f in configure.ac acconfig.h; do
[[ -f "$f" ]] && sed -i -e '/#define LIRC_DRIVER_DEVICE/d' "$f"
done
echo "#define LIRC_DRIVER_DEVICE \"${LIRC_DRIVER_DEVICE}\"" >> acconfig.h
sed -e "s/AM_CONFIG_HEADER/AC_CONFIG_HEADERS/" -i configure.ac || die # automake 1.13
eautoreconf
}
src_configure() {
econf \
--localstatedir=/var \
--with-syslog=LOG_DAEMON \
--enable-sandboxed \
--with-kerneldir="${KV_DIR}" \
--with-moduledir="/lib/modules/${KV_FULL}/misc" \
$(use_enable debug) \
$(use_enable static-libs static) \
$(use_with X x) \
${MY_OPTS} \
ABI="${KERNEL_ABI}" \
ARCH="$(tc-arch-kernel)"
}
src_compile() {
# force non-parallel make, Bug 196134 (confirmed valid for 0.9.0-r2)
emake -j1
MODULE_NAMES="lirc(misc:${S}/drivers)"
BUILD_TARGETS="all"
linux-mod_src_compile
}
src_install() {
emake DESTDIR="${D}" install
emake -C drivers DESTDIR="${D}" install
newinitd "${FILESDIR}"/lircd-0.8.6-r2 lircd
newinitd "${FILESDIR}"/lircmd lircmd
newconfd "${FILESDIR}"/lircd.conf.4 lircd
insinto /etc/modprobe.d/
newins "${FILESDIR}"/modprobed.lirc lirc.conf
newinitd "${FILESDIR}"/irexec-initd-0.8.6-r2 irexec
newconfd "${FILESDIR}"/irexec-confd irexec
systemd_dounit "${FILESDIR}"/irexec.service
systemd_dounit "${FILESDIR}"/lirc.service
systemd_dounit "${FILESDIR}"/lircm.service
if use doc ; then
dohtml doc/html/*.html
insinto /usr/share/doc/${PF}/images
doins doc/images/*
fi
insinto /usr/share/lirc/remotes
doins -r remotes/*
keepdir /etc/lirc
if [[ -e "${D}"/etc/lirc/lircd.conf ]]; then
newdoc "${D}"/etc/lirc/lircd.conf lircd.conf.example
fi
use static-libs || rm "${D}/usr/$(get_libdir)/liblirc_client.la"
}
pkg_preinst() {
linux-mod_pkg_preinst
local dir="${EROOT}/etc/modprobe.d"
if [[ -a "${dir}"/lirc && ! -a "${dir}"/lirc.conf ]]; then
elog "Renaming ${dir}/lirc to lirc.conf"
mv -f "${dir}/lirc" "${dir}/lirc.conf"
fi
# copy the first file that can be found
if [[ -f "${EROOT}"/etc/lirc/lircd.conf ]]; then
cp "${EROOT}"/etc/lirc/lircd.conf "${T}"/lircd.conf
elif [[ -f "${EROOT}"/etc/lircd.conf ]]; then
cp "${EROOT}"/etc/lircd.conf "${T}"/lircd.conf
MOVE_OLD_LIRCD_CONF=1
elif [[ -f "${D}"/etc/lirc/lircd.conf ]]; then
cp "${D}"/etc/lirc/lircd.conf "${T}"/lircd.conf
fi
# stop portage from touching the config file
if [[ -e "${D}"/etc/lirc/lircd.conf ]]; then
rm -f "${D}"/etc/lirc/lircd.conf
fi
}
pkg_postinst() {
linux-mod_pkg_postinst
# copy config file to new location
# without portage knowing about it
# so it will not delete it on unmerge or ever touch it again
if [[ -e "${T}"/lircd.conf ]]; then
cp "${T}"/lircd.conf "${EROOT}"/etc/lirc/lircd.conf
if [[ "$MOVE_OLD_LIRCD_CONF" = "1" ]]; then
elog "Moved /etc/lircd.conf to /etc/lirc/lircd.conf"
rm -f "${EROOT}"/etc/lircd.conf
fi
fi
einfo "The new default location for lircd.conf is inside of"
einfo "/etc/lirc/ directory"
}