SF35 initial profile

77 files changed, 544 insertions, 296 deletions

diff --git a/alterations/end.gcode b/alterations/end.gcode
new file mode 100644
index 0000000..3c6fdce
--- /dev/null
+++ b/alterations/end.gcode
@@ -0,0 +1,4 @@
+(end of the file, cooldown routines)
+M104 S0
+G91
+G1 Z10
diff --git a/alterations/replace.csv b/alterations/replace.csv
new file mode 100644
index 0000000..79137d9
--- /dev/null
+++ b/alterations/replace.csv
@@ -0,0 +1 @@
+M113	;M113
diff --git a/alterations/start.gcode b/alterations/start.gcode
new file mode 100644
index 0000000..ba7bdda
--- /dev/null
+++ b/alterations/start.gcode
@@ -0,0 +1,18 @@
+(Cupcake ABS default skeinforge profile)
+(homing routing)
+M104 S220 T0 (Temperature to 220 celsius)
+M109 S120 T0 (set heated-build-platform temperature)
+G21 (Metric FTW)
+G90 (Absolute Positioning)
+G92 X0 Y0 Z0 (You are now at 0,0,0)
+(You have failed me for the last time, MakerBot)
+G0 Z15 (Move up for test extrusion)
+M108 S255 (Extruder speed = max)
+M6 T0 (Wait for tool to heat up)
+G04 P5000 (Wait 5 seconds)
+M101 (Extruder on, forward)
+G04 P5000 (Wait 5 seconds)
+M103 (Extruder off)
+M01 (The heater is warming up and will do a test extrusion.  Click yes after you have cleared the nozzle of the extrusion.)
+G0 Z0	(Go back to zero.)
+(end of start.)
diff --git a/analyze.csv b/analyze.csv
deleted file mode 100644
index 3d6b1a7..0000000
--- a/analyze.csv
+++ /dev/null
@@ -1,3 +0,0 @@
-Format is tab separated preferences.
-Open File to be Analyzed	
-windowPositionBehold Preferences	0+0
diff --git a/behold.csv b/behold.csv
deleted file mode 100644
index 84de7f8..0000000
--- a/behold.csv
+++ /dev/null
@@ -1,32 +0,0 @@
-Format is tab separated preferences.
-Activate Behold	False
-Band Height (layers):	5
-Bottom Band Brightness (ratio):	0.7
-Bottom Layer Brightness (ratio):	1.0
-From the Bottom	False
-From the Top	True
-Draw Arrows	True
-Open File to Behold	
-Go Around Extruder Off Travel	False
-Layers From (index):	0
-Layers To (index):	999999
-Number of Fill Bottom Layers (integer):	1
-Number of Fill Top Layers (integer):	1
-Pixels over Extrusion Width (ratio):	10.0
-Screen Horizontal Inset (pixels):	100
-Screen Vertical Inset (pixels):	50
-Viewpoint Latitude (degrees):	45.0
-Viewpoint Longitude (degrees):	210.0
-Width of Extrusion Thread (pixels):	1
-Width of Fill Bottom Thread (pixels):	3
-Width of Fill Top Thread (pixels):	3
-Width of Loop Thread (pixels):	3
-Width of Perimeter Inside Thread (pixels):	4
-Width of Perimeter Outside Thread (pixels):	4
-Width of Raft Thread (pixels):	1
-Width of Travel Thread (pixels):	0
-Width of X Axis (pixels):	5
-Width of Y Axis (pixels):	5
-Width of Z Axis (pixels):	5
-windowPositionBehold Dynamic Preferences	0+0
-windowPositionBehold Preferences	0+0
diff --git a/carve.csv b/carve.csv
deleted file mode 100644
index f198a7f..0000000
--- a/carve.csv
+++ /dev/null
@@ -1,12 +0,0 @@
-Format is tab separated preferences.
-Extrusion Width over Thickness (ratio):	1.8
-Open File to be Carved	
-Import Coarseness (ratio):	1.0
-Correct Mesh	True
-Unproven Mesh	False
-Infill Bridge Thickness over Layer Thickness (ratio):	1.0
-Infill Bridge Width over Extrusion Width (ratio):	1.0
-Infill in Direction of Bridges	True
-Layer Thickness (mm):	0.37
-Layer Thickness over Precision (ratio):	10.0
-windowPositionBehold Preferences	0+0
diff --git a/clip.csv b/clip.csv
deleted file mode 100644
index 8019832..0000000
--- a/clip.csv
+++ /dev/null
@@ -1,5 +0,0 @@
-Format is tab separated preferences.
-Activate Clip	True
-Clip Over Extrusion Width (ratio):	0.18
-Open File to be Clipped	
-windowPositionBehold Preferences	0+0
diff --git a/comb.csv b/comb.csv
deleted file mode 100644
index b4d3214..0000000
--- a/comb.csv
+++ /dev/null
@@ -1,7 +0,0 @@
-Format is tab separated preferences.
-Activate Comb	True
-Arrival Inset Follow Distance over Extrusion Width (ratio):	3.0
-Jitter Over Extrusion Width (ratio):	10.0
-Minimum Perimeter Departure Distance over Extrusion Width (ratio):	5.0
-Open File to be Combed	
-windowPositionBehold Preferences	0+0
diff --git a/comment.csv b/comment.csv
deleted file mode 100644
index 0a2b5d2..0000000
--- a/comment.csv
+++ /dev/null
@@ -1,4 +0,0 @@
-Format is tab separated preferences.
-Activate Comment	False
-Open File to Write Comments for	
-windowPositionBehold Preferences	0+0
diff --git a/cool.csv b/cool.csv
deleted file mode 100644
index 3e4b33e..0000000
--- a/cool.csv
+++ /dev/null
@@ -1,7 +0,0 @@
-Format is tab separated preferences.
-Activate Cool	False
-Open File to be Cooled	
-Minimum Layer Time (seconds):	60.0
-Turn Fan On at Beginning	True
-Turn Fan Off at Ending	True
-windowPositionBehold Preferences	0+0
diff --git a/export.csv b/export.csv
deleted file mode 100644
index 0abbe57..0000000
--- a/export.csv
+++ /dev/null
@@ -1,12 +0,0 @@
-Format is tab separated preferences.
-Activate Export	True
-Also Send Output To:	
-Delete Comments	False
-Delete M110 Gcode Line	True
-binary_16_byte	False
-Do Not Change Output	True
-gcode_small	False
-gcode_step	False
-File Extension:	gcode
-Open File to be Exported	
-windowPositionBehold Preferences	0+0
diff --git a/fill.csv b/fill.csv
deleted file mode 100644
index 2235468..0000000
--- a/fill.csv
+++ /dev/null
@@ -1,22 +0,0 @@
-Format is tab separated preferences.
-Diaphragm Period (layers):	999999
-Diaphragm Thickness (layers):	0
-Extra Shells on Alternating Solid Layer (layers):	1
-Extra Shells on Base (layers):	2
-Extra Shells on Sparse Layer (layers):	1
-Grid Extra Overlap (ratio):	0.005
-Grid Junction Separation Band Height (layers):	10
-Grid Junction Separation over Octogon Radius At End (ratio):	0.0
-Grid Junction Separation over Octogon Radius At Middle (ratio):	0.0
-Open File to be Filled	
-Infill Begin Rotation (degrees):	45.0
-Infill Begin Rotation Repeat (layers):	1
-Infill Solidity (ratio):	0.23
-Infill Odd Layer Extra Rotation (degrees):	90.0
-Grid Hexagonal	True
-Grid Rectangular	False
-Line	False
-Interior Infill Density over Exterior Density (ratio):	0.1
-Outside Extruded First	True
-Solid Surface Thickness (layers):	2
-windowPositionBehold Preferences	0+0
diff --git a/fillet.csv b/fillet.csv
deleted file mode 100644
index eadb68e..0000000
--- a/fillet.csv
+++ /dev/null
@@ -1,12 +0,0 @@
-Format is tab separated preferences.
-Activate Fillet	True
-Arc Point	False
-Arc Radius	False
-Arc Segment	False
-Bevel	True
-Corner Feedrate over Operating Feedrate (ratio):	1.0
-Fillet Radius over Extrusion Width (ratio):	0.35
-Open File to be Filleted	
-Reversal Slowdown Distance over Extrusion Width (ratio):	0.5
-Use Intermediate Feedrate in Corners	False
-windowPositionBehold Preferences	0+0
diff --git a/gcode_scripts/end.txt b/gcode_scripts/end.txt
deleted file mode 100644
index c1c26a7..0000000
--- a/gcode_scripts/end.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-(end of the file, cooldown routines)
-M104 S0 T0 (temp zero)
-M109 S0 T0 (platform off)
-M106 (fan on)
-G92 Z0 (zero our z axis - hack b/c skeinforge mangles gcodes in end.txt)
-G1 Z10 (go up 10 b/c it was zeroed earlier.)
-G1 X0 Y0 Z10 (go to 0,0,z)
-M18 (turn off steppers.)
-
diff --git a/gcode_scripts/start.txt b/gcode_scripts/start.txt
deleted file mode 100644
index 3ca7561..0000000
--- a/gcode_scripts/start.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-(Cupcake ABS with heated build platform skeinforge profile)
-(beginning of start.txt)
-M104 S220 T0 (Extruder Temperature to 220 Celsius)
-M109 S110 T0 (Heated Platform Temperature to 110 Celsius)
-M107 (fan off)
-G21 (Metric FTW)
-G90 (Absolute Positioning)
-G92 X0 Y0 Z0 (You are now at 0,0,0)
-(You have failed me for the last time, MakerBot)
-G0 Z15 (Move up for warmup)
-M108 S255 (Extruder speed = max)
-M6 T0 (Wait for tool to heat up)
-G04 P5000 (Wait 5 seconds)
-M101 (Extruder on, forward)
-G04 P5000 (Wait 5 seconds)
-M103 (Extruder off)
-M01 (The heated build platform is heating up. Wait until after the lights have turned off for the first time, clear the test extrusion, and click yes.)
-G0 Z0    (Go back to zero.)
-(end of start.txt)
-
diff --git a/hop.csv b/hop.csv
deleted file mode 100644
index 914f48b..0000000
--- a/hop.csv
+++ /dev/null
@@ -1,6 +0,0 @@
-Format is tab separated preferences.
-Activate Hop	False
-Open File to be Hopped	
-Hop Over Layer Thickness (ratio):	1.0
-Minimum Hop Angle (degrees):	20.0
-windowPositionBehold Preferences	0+0
diff --git a/inset.csv b/inset.csv
deleted file mode 100644
index bd56288..0000000
--- a/inset.csv
+++ /dev/null
@@ -1,8 +0,0 @@
-Format is tab separated preferences.
-Extrusion Perimeter Width over Thickness (ratio):	1.583
-Open File to be Insetted	
-Infill Perimeter Overlap (ratio):	0.15
-Calculate Overlap from Perimeter and Infill	True
-Calculate Overlap from Perimeter Only	False
-Start at Home	True
-windowPositionBehold Preferences	0+0
diff --git a/material.csv b/material.csv
deleted file mode 100644
index 2153ca3..0000000
--- a/material.csv
+++ /dev/null
@@ -1,4 +0,0 @@
-Format is tab separated preferences.
-Material List:	ABS	HDPE	PCL	PLA
-Material Selection:	ABS
-windowPositionBehold Preferences	0+0
diff --git a/multiply.csv b/multiply.csv
deleted file mode 100644
index b8ae9d8..0000000
--- a/multiply.csv
+++ /dev/null
@@ -1,9 +0,0 @@
-Format is tab separated preferences.
-Activate Multiply:	True
-Center X (millimeters):	0.0
-Center Y (millimeters):	0.0
-Open File to be Multiplied	
-Number of Columns (integer):	1
-Number of Rows (integer):	1
-Separation over Extrusion Width (ratio):	10.0
-windowPositionBehold Preferences	0+0
diff --git a/oozebane.csv b/oozebane.csv
deleted file mode 100644
index 58e8702..0000000
--- a/oozebane.csv
+++ /dev/null
@@ -1,12 +0,0 @@
-Format is tab separated preferences.
-Activate Oozebane	True
-After Startup Distance (millimeters):	0.275
-Early Shutdown Distance (millimeters):	0.3
-Early Startup Distance Constant (millimeters):	20.0
-Early Startup Maximum Distance (millimeters):	5.25
-First Early Startup Distance (millimeters):	20.0
-Open File to be Oozebaned	
-Minimum Distance for Early Startup (millimeters):	0.01
-Minimum Distance for Early Shutdown (millimeters):	1.0
-Slowdown Startup Steps (positive integer):	1
-windowPositionBehold Preferences	0+0
diff --git a/polyfile.csv b/polyfile.csv
deleted file mode 100644
index ecb5dcc..0000000
--- a/polyfile.csv
+++ /dev/null
@@ -1,4 +0,0 @@
-Format is tab separated preferences.
-Execute All Unmodified Files in a Directory	False
-Execute File	True
-windowPositionBehold Preferences	0+0
diff --git a/profiles/comment.csv b/profiles/comment.csv
new file mode 100644
index 0000000..df35361
--- /dev/null
+++ b/profiles/comment.csv
@@ -0,0 +1,5 @@
+Format is tab separated comment settings.
+Name                          	Value
+WindowPosition	0+0
+Activate Comment	False
+Open File to Write Comments for	
diff --git a/profiles/cutting.csv b/profiles/cutting.csv
new file mode 100644
index 0000000..343333d
--- /dev/null
+++ b/profiles/cutting.csv
@@ -0,0 +1,4 @@
+Format is tab separated cutting settings.
+Name                          	Value
+WindowPosition	0+400
+Profile Selection:	end_mill
diff --git a/profiles/description.csv b/profiles/description.csv
new file mode 100644
index 0000000..6eec4a6
--- /dev/null
+++ b/profiles/description.csv
@@ -0,0 +1,4 @@
+Format is tab separated description settings.
+Name                          	Value
+WindowPosition	0+0
+Description Text:	Write your description of the profile here.___replaced___newline___replaced___newlineSuggested format is a description, followed by a link to the profile post or web page.
diff --git a/profiles/extrusion.csv b/profiles/extrusion.csv
new file mode 100644
index 0000000..3db7596
--- /dev/null
+++ b/profiles/extrusion.csv
@@ -0,0 +1,4 @@
+Format is tab separated extrusion settings.
+Name                          	Value
+WindowPosition	0+400
+Profile Selection:	ABS
diff --git a/profiles/extrusion/ABS/bottom.csv b/profiles/extrusion/ABS/bottom.csv
new file mode 100644
index 0000000..f7ced9a
--- /dev/null
+++ b/profiles/extrusion/ABS/bottom.csv
@@ -0,0 +1,7 @@
+Format is tab separated bottom settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Bottom	
+Activate Bottom:	True
+Altitude (mm):	0.3
+SVG Viewer:	webbrowser
diff --git a/profiles/extrusion/ABS/carve.csv b/profiles/extrusion/ABS/carve.csv
new file mode 100644
index 0000000..f3a0517
--- /dev/null
+++ b/profiles/extrusion/ABS/carve.csv
@@ -0,0 +1,16 @@
+Format is tab separated carve settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Carve	
+Add Layer Template to SVG	True
+Bridge Thickness Multiplier (ratio):	1.0
+Extra Decimal Places (float):	1.0
+Import Coarseness (ratio):	1.0
+Infill in Direction of Bridges	True
+Layer Thickness (mm):	0.4
+Layers From (index):	0
+Layers To (index):	912345678
+Correct Mesh	True
+Unproven Mesh	False
+Perimeter Width over Thickness (ratio):	1.45
+SVG Viewer:	webbrowser
diff --git a/profiles/extrusion/ABS/chamber.csv b/profiles/extrusion/ABS/chamber.csv
new file mode 100644
index 0000000..ce8dd85
--- /dev/null
+++ b/profiles/extrusion/ABS/chamber.csv
@@ -0,0 +1,8 @@
+Format is tab separated chamber settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Chamber	
+Activate Chamber:	False
+Bed Temperature (Celcius):	60.0
+Chamber Temperature (Celcius):	30.0
+Holding Force (bar):	0.0
diff --git a/profiles/extrusion/ABS/clip.csv b/profiles/extrusion/ABS/clip.csv
new file mode 100644
index 0000000..e14c474
--- /dev/null
+++ b/profiles/extrusion/ABS/clip.csv
@@ -0,0 +1,7 @@
+Format is tab separated clip settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Clip	
+Activate Clip	False
+Clip Over Perimeter Width (ratio):	0.5
+Maximum Connection Distance Over Perimeter Width (ratio):	10.0
diff --git a/profiles/extrusion/ABS/comb.csv b/profiles/extrusion/ABS/comb.csv
new file mode 100644
index 0000000..dc68f7d
--- /dev/null
+++ b/profiles/extrusion/ABS/comb.csv
@@ -0,0 +1,5 @@
+Format is tab separated comb settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Comb	
+Activate Comb	True
diff --git a/profiles/extrusion/ABS/cool.csv b/profiles/extrusion/ABS/cool.csv
new file mode 100644
index 0000000..9c76d7d
--- /dev/null
+++ b/profiles/extrusion/ABS/cool.csv
@@ -0,0 +1,12 @@
+Format is tab separated cool settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Cool	
+Activate Cool	False
+Orbit	True
+Slow Down	False
+Maximum Cool (Celcius):	2.0
+Minimum Layer Time (seconds):	5.0
+Minimum Orbital Radius (millimeters):	10.0
+Turn Fan On at Beginning	False
+Turn Fan Off at Ending	False
diff --git a/profiles/extrusion/ABS/dimension.csv b/profiles/extrusion/ABS/dimension.csv
new file mode 100644
index 0000000..e31ca32
--- /dev/null
+++ b/profiles/extrusion/ABS/dimension.csv
@@ -0,0 +1,10 @@
+Format is tab separated dimension settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Dimension	
+Activate Dimension	False
+Absolute Extrusion Distance	True
+Relative Extrusion Distance	False
+Extruder Retraction Speed (mm/s):	13.3
+Retraction Distance (millimeters):	0.0
+Restart Extra Distance (millimeters):	0.0
diff --git a/profiles/extrusion/ABS/export.csv b/profiles/extrusion/ABS/export.csv
new file mode 100644
index 0000000..4ec0003
--- /dev/null
+++ b/profiles/extrusion/ABS/export.csv
@@ -0,0 +1,14 @@
+Format is tab separated export settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Export	
+Activate Export	True
+Also Send Output To:	
+Delete Comments	False
+Do Not Change Output	True
+binary_16_byte	False
+gcode_step	False
+gcode_time_segment	False
+gcode_small	False
+File Extension:	gcode
+Save Penultimate Gcode	False
diff --git a/profiles/extrusion/ABS/fill.csv b/profiles/extrusion/ABS/fill.csv
new file mode 100644
index 0000000..d873ea5
--- /dev/null
+++ b/profiles/extrusion/ABS/fill.csv
@@ -0,0 +1,33 @@
+Format is tab separated fill settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Fill	
+Activate Fill:	True
+Diaphragm Period (layers):	100
+Diaphragm Thickness (layers):	0
+Extra Shells on Alternating Solid Layer (layers):	2
+Extra Shells on Base (layers):	2
+Extra Shells on Sparse Layer (layers):	2
+Grid Circle Separation over Perimeter Width (ratio):	0.2
+Grid Extra Overlap (ratio):	0.1
+Grid Junction Separation Band Height (layers):	10
+Grid Junction Separation over Octogon Radius At End (ratio):	0.0
+Grid Junction Separation over Octogon Radius At Middle (ratio):	0.0
+Infill Begin Rotation (degrees):	90.0
+Infill Begin Rotation Repeat (layers):	1
+Infill Interior Density over Exterior Density (ratio):	0.9
+Infill Odd Layer Extra Rotation (degrees):	90.0
+Grid Circular	False
+Grid Hexagonal	True
+Grid Rectangular	False
+Line	False
+Infill Perimeter Overlap (ratio):	0.35
+Infill Solidity (ratio):	0.25
+Infill Width over Thickness (ratio):	1.5
+Solid Surface Thickness (layers):	2
+Infill > Loops > Perimeter	False
+Infill > Perimeter > Loops	False
+Loops > Infill > Perimeter	False
+Loops > Perimeter > Infill	True
+Perimeter > Infill > Loops	False
+Perimeter > Loops > Infill	False
diff --git a/profiles/extrusion/ABS/fillet.csv b/profiles/extrusion/ABS/fillet.csv
new file mode 100644
index 0000000..61e1043
--- /dev/null
+++ b/profiles/extrusion/ABS/fillet.csv
@@ -0,0 +1,13 @@
+Format is tab separated fillet settings.
+Name                          	Value
+WindowPosition	700+0
+Open File to be Filleted	
+Activate Fillet	False
+Arc Point	False
+Arc Radius	False
+Arc Segment	False
+Bevel	True
+Corner Feed Rate over Operating Feed Rate (ratio):	1.0
+Fillet Radius over Perimeter Width (ratio):	0.35
+Reversal Slowdown Distance over Perimeter Width (ratio):	0.5
+Use Intermediate Feed Rate in Corners	True
diff --git a/profiles/extrusion/ABS/hop.csv b/profiles/extrusion/ABS/hop.csv
new file mode 100644
index 0000000..6d2853f
--- /dev/null
+++ b/profiles/extrusion/ABS/hop.csv
@@ -0,0 +1,7 @@
+Format is tab separated hop settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Hop	
+Activate Hop	False
+Hop Over Layer Thickness (ratio):	1.0
+Minimum Hop Angle (degrees):	30.0
diff --git a/profiles/extrusion/ABS/inset.csv b/profiles/extrusion/ABS/inset.csv
new file mode 100644
index 0000000..49199e6
--- /dev/null
+++ b/profiles/extrusion/ABS/inset.csv
@@ -0,0 +1,10 @@
+Format is tab separated inset settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Inset	
+Add Custom Code for Temperature Reading	True
+Bridge Width Multiplier (ratio):	1.0
+Ascending Area	True
+Descending Area	False
+Overlap Removal Width over Perimeter Width (ratio):	0.8
+Turn Extruder Heater Off at Shut Down	True
diff --git a/profiles/extrusion/ABS/jitter.csv b/profiles/extrusion/ABS/jitter.csv
new file mode 100644
index 0000000..09edfb6
--- /dev/null
+++ b/profiles/extrusion/ABS/jitter.csv
@@ -0,0 +1,6 @@
+Format is tab separated jitter settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Jitter	
+Activate Jitter	False
+Jitter Over Perimeter Width (ratio):	2.0
diff --git a/profiles/extrusion/ABS/limit.csv b/profiles/extrusion/ABS/limit.csv
new file mode 100644
index 0000000..353e5c1
--- /dev/null
+++ b/profiles/extrusion/ABS/limit.csv
@@ -0,0 +1,7 @@
+Format is tab separated limit settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Limit	
+Activate Limit	False
+Maximum Initial Feed Rate (mm/s):	1.0
+Maximum Z Feed Rate (mm/s):	8.0
diff --git a/profiles/extrusion/ABS/multiply.csv b/profiles/extrusion/ABS/multiply.csv
new file mode 100644
index 0000000..7f9d9db
--- /dev/null
+++ b/profiles/extrusion/ABS/multiply.csv
@@ -0,0 +1,10 @@
+Format is tab separated multiply settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Multiply	
+Activate Multiply:	False
+Center X (mm):	0.0
+Center Y (mm):	0.0
+Number of Columns (integer):	1
+Number of Rows (integer):	1
+Separation over Perimeter Width (ratio):	15.0
diff --git a/profiles/extrusion/ABS/oozebane.csv b/profiles/extrusion/ABS/oozebane.csv
new file mode 100644
index 0000000..c3fddfa
--- /dev/null
+++ b/profiles/extrusion/ABS/oozebane.csv
@@ -0,0 +1,13 @@
+Format is tab separated oozebane settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Oozebane	
+Activate Oozebane	False
+After Startup Distance (millimeters):	1.2
+Early Shutdown Distance (millimeters):	1.2
+Early Startup Distance Constant (millimeters):	20.0
+Early Startup Maximum Distance (millimeters):	1.2
+First Early Startup Distance (millimeters):	25.0
+Minimum Distance for Early Startup (millimeters):	0.0
+Minimum Distance for Early Shutdown (millimeters):	0.0
+Slowdown Startup Steps (positive integer):	3
diff --git a/profiles/extrusion/ABS/preface.csv b/profiles/extrusion/ABS/preface.csv
new file mode 100644
index 0000000..2d89dd0
--- /dev/null
+++ b/profiles/extrusion/ABS/preface.csv
@@ -0,0 +1,12 @@
+Format is tab separated preface settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Preface	
+Meta:	
+Name of End File:	end.gcode
+Name of Start File:	start.gcode
+Set Positioning to Absolute	False
+Set Units to Millimeters	False
+Start at Home	False
+Turn Extruder Off at Shut Down	False
+Turn Extruder Off at Start Up	False
diff --git a/profiles/extrusion/ABS/raft.csv b/profiles/extrusion/ABS/raft.csv
new file mode 100644
index 0000000..ab0a273
--- /dev/null
+++ b/profiles/extrusion/ABS/raft.csv
@@ -0,0 +1,34 @@
+Format is tab separated raft settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Raft	
+Activate Raft	True
+Add Raft, Elevate Nozzle, Orbit and Set Altitude:	True
+Base Feed Rate Multiplier (ratio):	0.6
+Base Flow Rate Multiplier (ratio):	1.0
+Base Infill Density (ratio):	0.5
+Base Layer Thickness over Layer Thickness:	2.0
+Base Layers (integer):	1
+Base Nozzle Lift over Base Layer Thickness (ratio):	0.8
+Initial Circling:	False
+Infill Overhang over Extrusion Width (ratio):	0.05
+Interface Feed Rate Multiplier (ratio):	1.4
+Interface Flow Rate Multiplier (ratio):	1.0
+Interface Infill Density (ratio):	0.65
+Interface Layer Thickness over Layer Thickness:	1.2
+Interface Layers (integer):	1
+Interface Nozzle Lift over Interface Layer Thickness (ratio):	0.2
+Object First Layer Feed Rate Infill Multiplier (ratio):	0.65
+Object First Layer Feed Rate Perimeter Multiplier (ratio):	0.75
+Object First Layer Flow Rate Multiplier (ratio):	1.0
+Operating Nozzle Lift over Layer Thickness (ratio):	1.2
+Raft Additional Margin over Length (%):	1.3
+Raft Margin (mm):	5.0
+Support Cross Hatch	False
+Support Flow Rate over Operating Flow Rate (ratio):	1.0
+Support Gap over Perimeter Extrusion Width (ratio):	6.0
+None	False
+Empty Layers Only	False
+Everywhere	False
+Exterior Only	True
+Support Minimum Angle (degrees):	46.0
diff --git a/profiles/extrusion/ABS/speed.csv b/profiles/extrusion/ABS/speed.csv
new file mode 100644
index 0000000..bb1535b
--- /dev/null
+++ b/profiles/extrusion/ABS/speed.csv
@@ -0,0 +1,16 @@
+Format is tab separated speed settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Speed	
+Activate Speed:	True
+Add Flow Rate:	True
+Bridge Feed Rate Multiplier (ratio):	1.0
+Bridge Flow Rate Multiplier (ratio):	1.0
+Duty Cyle at Beginning (portion):	1.0
+Duty Cyle at Ending (portion):	0.0
+Feed Rate (mm/s):	32.0
+Flow Rate Setting (float):	255.0
+Orbital Feed Rate over Operating Feed Rate (ratio):	0.5
+Perimeter Feed Rate over Operating Feed Rate (ratio):	1.0
+Perimeter Flow Rate over Operating Flow Rate (ratio):	1.0
+Travel Feed Rate (mm/s):	32.0
diff --git a/profiles/extrusion/ABS/splodge.csv b/profiles/extrusion/ABS/splodge.csv
new file mode 100644
index 0000000..b02dc16
--- /dev/null
+++ b/profiles/extrusion/ABS/splodge.csv
@@ -0,0 +1,11 @@
+Format is tab separated splodge settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Splodge	
+Activate Splodge	False
+Initial Lift over Extra Thickness (ratio):	1.0
+Initial Splodge Feed Rate (mm/s):	1.0
+Initial Splodge Quantity Length (millimeters):	30.0
+Operating Lift over Extra Thickness (ratio):	1.0
+Operating Splodge Feed Rate (mm/s):	1.0
+Operating Splodge Quantity Length (millimeters):	1.0
diff --git a/profiles/extrusion/ABS/stretch.csv b/profiles/extrusion/ABS/stretch.csv
new file mode 100644
index 0000000..594daae
--- /dev/null
+++ b/profiles/extrusion/ABS/stretch.csv
@@ -0,0 +1,11 @@
+Format is tab separated stretch settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Stretch	
+Activate Stretch	False
+Cross Limit Distance Over Perimeter Width (ratio):	5.0
+Loop Stretch Over Perimeter Width (ratio):	0.11
+Path Stretch Over Perimeter Width (ratio):	0.0
+Perimeter Inside Stretch Over Perimeter Width (ratio):	0.32
+Perimeter Outside Stretch Over Perimeter Width (ratio):	0.1
+Stretch From Distance Over Perimeter Width (ratio):	2.0
diff --git a/profiles/extrusion/ABS/temperature.csv b/profiles/extrusion/ABS/temperature.csv
new file mode 100644
index 0000000..14f8006
--- /dev/null
+++ b/profiles/extrusion/ABS/temperature.csv
@@ -0,0 +1,14 @@
+Format is tab separated temperature settings.
+Name                          	Value
+WindowPosition	600+0
+Open File for Temperature	
+Activate Temperature:	True
+Cooling Rate (Celcius/second):	3.0
+Heating Rate (Celcius/second):	10.0
+Base Temperature (Celcius):	225.0
+Interface Temperature (Celcius):	225.0
+Object First Layer Infill Temperature (Celcius):	225.0
+Object First Layer Perimeter Temperature (Celcius):	225.0
+Object Next Layers Temperature (Celcius):	225.0
+Support Layers Temperature (Celcius):	225.0
+Supported Layers Temperature (Celcius):	225.0
diff --git a/profiles/extrusion/ABS/tower.csv b/profiles/extrusion/ABS/tower.csv
new file mode 100644
index 0000000..307f220
--- /dev/null
+++ b/profiles/extrusion/ABS/tower.csv
@@ -0,0 +1,8 @@
+Format is tab separated tower settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Tower	
+Activate Tower	False
+Extruder Possible Collision Cone Angle (degrees):	60.0
+Maximum Tower Height (layers):	5
+Tower Start Layer (integer):	5
diff --git a/profiles/extrusion/ABS/vectorwrite.csv b/profiles/extrusion/ABS/vectorwrite.csv
new file mode 100644
index 0000000..ac6e12f
--- /dev/null
+++ b/profiles/extrusion/ABS/vectorwrite.csv
@@ -0,0 +1,8 @@
+Format is tab separated vectorwrite settings.
+Name                          	Value
+WindowPosition	700+0
+Activate Vectorwrite	False
+Open File to Write Vector Graphics for	
+Layers From (index):	0
+Layers To (index):	912345678
+SVG Viewer:	webbrowser
diff --git a/profiles/extrusion/ABS/widen.csv b/profiles/extrusion/ABS/widen.csv
new file mode 100644
index 0000000..2acc295
--- /dev/null
+++ b/profiles/extrusion/ABS/widen.csv
@@ -0,0 +1,5 @@
+Format is tab separated widen settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Widen	
+Activate Widen:	False
diff --git a/profiles/extrusion/ABS/wipe.csv b/profiles/extrusion/ABS/wipe.csv
new file mode 100644
index 0000000..64a86d4
--- /dev/null
+++ b/profiles/extrusion/ABS/wipe.csv
@@ -0,0 +1,15 @@
+Format is tab separated wipe settings.
+Name                          	Value
+WindowPosition	700+0
+Open File for Wipe	
+Activate Wipe	True
+Location Arrival X (mm):	52.0
+Location Arrival Y (mm):	-57.0
+Location Arrival Z (mm):	10.0
+Location Departure X (mm):	52.0
+Location Departure Y (mm):	-30.0
+Location Departure Z (mm):	10.0
+Location Wipe X (mm):	52.0
+Location Wipe Y (mm):	-55.0
+Location Wipe Z (mm):	10.0
+Wipe Period (layers):	99999999
diff --git a/profiles/home.csv b/profiles/home.csv
new file mode 100644
index 0000000..0b37e04
--- /dev/null
+++ b/profiles/home.csv
@@ -0,0 +1,6 @@
+Format is tab separated home settings.
+Name                          	Value
+WindowPosition	0+0
+Open File for Home	
+Activate Home	False
+Name of Homing File:	homing.gcode
diff --git a/profiles/interpret.csv b/profiles/interpret.csv
new file mode 100644
index 0000000..4fe641d
--- /dev/null
+++ b/profiles/interpret.csv
@@ -0,0 +1,7 @@
+Format is tab separated interpret settings.
+Name                          	Value
+WindowPosition	0+0
+Open File for Interpret	
+Activate Interpret	False
+Print Interpretion	False
+Text Program:	webbrowser
diff --git a/profiles/lash.csv b/profiles/lash.csv
new file mode 100644
index 0000000..cc36337
--- /dev/null
+++ b/profiles/lash.csv
@@ -0,0 +1,7 @@
+Format is tab separated lash settings.
+Name                          	Value
+WindowPosition	0+0
+Open File for Lash	
+Activate Lash	False
+X Backlash (mm):	0.2
+Y Backlash (mm):	0.3
diff --git a/profiles/milling.csv b/profiles/milling.csv
new file mode 100644
index 0000000..051a168
--- /dev/null
+++ b/profiles/milling.csv
@@ -0,0 +1,4 @@
+Format is tab separated milling settings.
+Name                          	Value
+WindowPosition	0+400
+Profile Selection:	end_mill
diff --git a/profiles/polyfile.csv b/profiles/polyfile.csv
new file mode 100644
index 0000000..d0ee17c
--- /dev/null
+++ b/profiles/polyfile.csv
@@ -0,0 +1,5 @@
+Format is tab separated polyfile settings.
+Name                          	Value
+WindowPosition	0+0
+Execute All Unmodified Files in a Directory	False
+Execute File	True
diff --git a/profiles/skeinforge.csv b/profiles/skeinforge.csv
new file mode 100644
index 0000000..7126aa9
--- /dev/null
+++ b/profiles/skeinforge.csv
@@ -0,0 +1,9 @@
+Format is tab separated skeinforge settings.
+Name                          	Value
+WindowPosition	698+25
+Open File for Skeinforge	
+analyze	False
+craft	True
+help	False
+meta	False
+profile	False
diff --git a/profiles/skeinforge_analyze.csv b/profiles/skeinforge_analyze.csv
new file mode 100644
index 0000000..23fecbc
--- /dev/null
+++ b/profiles/skeinforge_analyze.csv
@@ -0,0 +1,10 @@
+Format is tab separated skeinforge analyze settings.
+Name                          	Value
+WindowPosition	0+0
+Open File for Analyze	
+comment	False
+interpret	True
+skeiniso	False
+skeinlayer	False
+statistic	False
+vectorwrite	False
diff --git a/profiles/skeinforge_craft.csv b/profiles/skeinforge_craft.csv
new file mode 100644
index 0000000..a262589
--- /dev/null
+++ b/profiles/skeinforge_craft.csv
@@ -0,0 +1,44 @@
+Format is tab separated skeinforge craft settings.
+Name                          	Value
+WindowPosition	0+0
+Open File for Craft	
+bottom	False
+carve	True
+chamber	False
+chop	False
+cleave	False
+clip	False
+coil	False
+comb	False
+cool	False
+dimension	False
+drill	False
+export	False
+feed	False
+fill	False
+fillet	False
+flow	False
+home	False
+hop	False
+inset	False
+jitter	False
+lash	False
+lift	False
+limit	False
+mill	False
+multiply	False
+oozebane	False
+outline	False
+outset	False
+preface	False
+raft	False
+raftless	False
+speed	False
+splodge	False
+stretch	False
+temperature	False
+tower	False
+unpause	False
+whittle	False
+widen	False
+wipe	False
diff --git a/profiles/skeinforge_help.csv b/profiles/skeinforge_help.csv
new file mode 100644
index 0000000..445ef97
--- /dev/null
+++ b/profiles/skeinforge_help.csv
@@ -0,0 +1,4 @@
+Format is tab separated skeinforge help settings.
+Name                          	Value
+WindowPosition	0+0
+Wiki Manual Primary	True
diff --git a/profiles/skeinforge_meta.csv b/profiles/skeinforge_meta.csv
new file mode 100644
index 0000000..72e048b
--- /dev/null
+++ b/profiles/skeinforge_meta.csv
@@ -0,0 +1,5 @@
+Format is tab separated skeinforge meta settings.
+Name                          	Value
+WindowPosition	0+0
+description	False
+polyfile	True
diff --git a/profiles/skeinforge_profile.csv b/profiles/skeinforge_profile.csv
new file mode 100644
index 0000000..1d60c1b
--- /dev/null
+++ b/profiles/skeinforge_profile.csv
@@ -0,0 +1,7 @@
+Format is tab separated skeinforge profile settings.
+Name                          	Value
+WindowPosition	0+200
+cutting	False
+extrusion	True
+milling	False
+winding	False
diff --git a/profiles/skeiniso.csv b/profiles/skeiniso.csv
new file mode 100644
index 0000000..8cc481d
--- /dev/null
+++ b/profiles/skeiniso.csv
@@ -0,0 +1,40 @@
+Format is tab separated skeiniso settings.
+Name                          	Value
+WindowPosition	0+0
+Open File for Skeiniso	
+Activate Skeiniso	False
+Frame List
+Animation Line Quickening (ratio):	1.0
+Animation Slide Show Rate (layers/second):	2.0
+Axis Rulings	True
+Band Height (layers):	5
+Bottom Band Brightness (ratio):	0.7
+Bottom Layer Brightness (ratio):	1.0
+From the Bottom	False
+From the Top	True
+Draw Arrows	False
+Go Around Extruder Off Travel	False
+Layer (index):	0
+Layer Extra Span (integer):	912345678
+Line (index):	0
+Display Line	True
+View Move	False
+View Rotate	False
+Number of Fill Bottom Layers (integer):	1
+Number of Fill Top Layers (integer):	1
+Scale (pixels per millimeter):	15.0
+Screen Horizontal Inset (pixels):	100
+Screen Vertical Inset (pixels):	220
+Viewpoint Latitude (degrees):	15.0
+Viewpoint Longitude (degrees):	210.0
+Width of Axis Negative Side (pixels):	2
+Width of Axis Positive Side (pixels):	6
+Width of Fill Bottom Thread (pixels):	2
+Width of Fill Top Thread (pixels):	2
+Width of Infill Thread (pixels):	1
+Width of Loop Thread (pixels):	2
+Width of Perimeter Inside Thread (pixels):	8
+Width of Perimeter Outside Thread (pixels):	8
+Width of Raft Thread (pixels):	1
+Width of Selection Thread (pixels):	6
+Width of Travel Thread (pixels):	0
diff --git a/profiles/skeinlayer.csv b/profiles/skeinlayer.csv
new file mode 100644
index 0000000..fbe43c9
--- /dev/null
+++ b/profiles/skeinlayer.csv
@@ -0,0 +1,22 @@
+Format is tab separated skeinlayer settings.
+Name                          	Value
+WindowPosition	0+0
+Open File for Skeinlayer	
+Activate Skeinlayer	False
+Frame List
+Animation Line Quickening (ratio):	1.0
+Animation Slide Show Rate (layers/second):	2.0
+Draw Arrows	True
+Go Around Extruder Off Travel	False
+Layer (index):	15
+Layer Extra Span (integer):	0
+Line (index):	0
+Display Line	True
+View Move	False
+Numeric Pointer	True
+Scale (pixels per millimeter):	15.0
+Screen Horizontal Inset (pixels):	100
+Screen Vertical Inset (pixels):	220
+Width of Extrusion Thread (pixels):	3
+Width of Selection Thread (pixels):	6
+Width of Travel Thread (pixels):	1
diff --git a/profiles/statistic.csv b/profiles/statistic.csv
new file mode 100644
index 0000000..871b987
--- /dev/null
+++ b/profiles/statistic.csv
@@ -0,0 +1,11 @@
+Format is tab separated statistic settings.
+Name                          	Value
+WindowPosition	0+0
+Activate Statistic	True
+Machine Time ($/hour):	1.0
+Material ($/kg):	10.0
+Density (kg/m3):	930.0
+Extrusion Diameter over Thickness (ratio):	1.25
+Open File to Generate Statistics for	
+Print Statistics	True
+Save Statistics	False
diff --git a/profiles/unpause.csv b/profiles/unpause.csv
new file mode 100644
index 0000000..5ab9392
--- /dev/null
+++ b/profiles/unpause.csv
@@ -0,0 +1,7 @@
+Format is tab separated unpause settings.
+Name                          	Value
+WindowPosition	0+0
+Open File for Unpause	
+Activate Unpause	False
+Delay (milliseconds):	28.0
+Maximum Speed (ratio):	1.3
diff --git a/profiles/winding.csv b/profiles/winding.csv
new file mode 100644
index 0000000..0b65a9f
--- /dev/null
+++ b/profiles/winding.csv
@@ -0,0 +1,4 @@
+Format is tab separated winding settings.
+Name                          	Value
+WindowPosition	0+400
+Profile Selection:	free_wire
diff --git a/raft_ABS.csv b/raft_ABS.csv
deleted file mode 100644
index 7527b72..0000000
--- a/raft_ABS.csv
+++ /dev/null
@@ -1,33 +0,0 @@
-Format is tab separated preferences.
-Activate Raft:	True
-Add Raft, Elevate Nozzle, Orbit and Set Altitude:	True
-Base Infill Density (ratio):	0.5
-Base Layer Thickness over Layer Thickness:	2.2
-Base Layers (integer):	1
-Base Nozzle Lift over Half Base Layer Thickness (ratio):	0.4
-Bottom Altitude:	0.1
-Open File to be Rafted	
-Infill Overhang (ratio):	0.1
-Interface Infill Density (ratio):	0.4
-Interface Layer Thickness over Layer Thickness:	1.4
-Interface Layers (integer):	3
-Interface Nozzle Lift over Half Interface Layer Thickness (ratio):	0.5
-Operating Nozzle Lift over Half Layer Thickness (ratio):	1.0
-Raft Outset Radius over Extrusion Width (ratio):	7.5
-Support Inset over Perimeter Extrusion Width (ratio):	0.0
-No Support Material	True
-Support Material Everywhere	False
-Support Material on Exterior Only	False
-Support Minimum Angle (degrees):	60.0
-Temperature Change Time Before Raft (seconds):	0.0
-Temperature Change Time Before First Layer Outline (seconds):	0.0
-Temperature Change Time Before Next Threads (seconds):	0.0
-Temperature Change Time Before Support Layers (seconds):	0.0
-Temperature Change Time Before Supported Layers (seconds):	0.0
-Temperature of Raft (Celcius):	230.0
-Temperature of Shape First Layer Outline (Celcius):	215.0
-Temperature of Shape First Layer Within (Celcius):	215.0
-Temperature of Shape Next Layers (Celcius):	220.0
-Temperature of Support Layers (Celcius):	220.0
-Temperature of Supported Layers (Celcius):	220.0
-windowPositionRaft Preferences	6+23
diff --git a/skeinforge.csv b/skeinforge.csv
deleted file mode 100644
index 980129b..0000000
--- a/skeinforge.csv
+++ /dev/null
@@ -1,3 +0,0 @@
-Format is tab separated preferences.
-Open File to be Skeinforged	
-windowPositionBehold Preferences	0+0
diff --git a/skeinview.csv b/skeinview.csv
deleted file mode 100644
index df4ac6e..0000000
--- a/skeinview.csv
+++ /dev/null
@@ -1,9 +0,0 @@
-Format is tab separated preferences.
-Activate Skeinview	False
-Draw Arrows	True
-Open File to Skeinview	
-Go Around Extruder Off Travel	False
-Pixels over Extrusion Width (ratio):	10.0
-Screen Horizontal Inset (pixels):	100
-Screen Vertical Inset (pixels):	100
-windowPositionBehold Preferences	0+0
diff --git a/speed.csv b/speed.csv
deleted file mode 100644
index d675614..0000000
--- a/speed.csv
+++ /dev/null
@@ -1,16 +0,0 @@
-Format is tab separated preferences.
-Activate Speed:	True
-Bridge Feedrate Multiplier (ratio):	1.0
-Extrusion Diameter over Thickness (ratio):	1.583
-Feedrate (mm/s):	34.1
-Open File to be Speeded	
-Do Not Add Flowrate	False
-Metric	False
-PWM Setting	True
-Flowrate PWM Setting (if PWM Setting is Chosen):	255.0
-Orbital Feedrate over Operating Feedrate (ratio):	1.0
-Perimeter Feedrate over Operating Feedrate (ratio):	1.0
-Perimeter Flowrate over Operating Flowrate (ratio):	1.0
-Support Flowrate over Operating Flowrate (ratio):	1.0
-Travel Feedrate (mm/s):	55.0
-windowPositionBehold Preferences	0+0
diff --git a/statistic.csv b/statistic.csv
deleted file mode 100644
index 95eded8..0000000
--- a/statistic.csv
+++ /dev/null
@@ -1,6 +0,0 @@
-Format is tab separated preferences.
-Activate Statistic	True
-Open File to Generate Statistics for	
-Print Statistics	True
-Save Statistics	False
-windowPositionBehold Preferences	0+0
diff --git a/stretch.csv b/stretch.csv
deleted file mode 100644
index e6afe28..0000000
--- a/stretch.csv
+++ /dev/null
@@ -1,8 +0,0 @@
-Format is tab separated preferences.
-Activate Stretch	False
-Loop Stretch Over Extrusion Width (ratio):	0.15
-Path Stretch Over Extrusion Width (ratio):	0.0
-Open File to be Stretched	
-Stretch From Distance Over Extrusion Width (ratio):	2.0
-Perimeter Maximum Stretch Over Extrusion Width (ratio):	0.3
-windowPositionBehold Preferences	0+0
diff --git a/tower.csv b/tower.csv
deleted file mode 100644
index 5f5c2d2..0000000
--- a/tower.csv
+++ /dev/null
@@ -1,7 +0,0 @@
-Format is tab separated preferences.
-Activate Tower	False
-Extruder Possible Collision Cone Angle (degrees):	60.0
-Open File to be Towered	
-Maximum Tower Height (layers):	10
-Tower Start Layer (integer):	2
-windowPositionBehold Preferences	0+0
diff --git a/unpause.csv b/unpause.csv
deleted file mode 100644
index b77ef20..0000000
--- a/unpause.csv
+++ /dev/null
@@ -1,6 +0,0 @@
-Format is tab separated preferences.
-Activate Unpause	False
-Delay (milliseconds):	28.0
-Open File to be Unpaused	
-Maximum Speed (ratio):	1.5
-windowPositionBehold Preferences	0+0
diff --git a/vectorwrite.csv b/vectorwrite.csv
deleted file mode 100644
index 2349e84..0000000
--- a/vectorwrite.csv
+++ /dev/null
@@ -1,6 +0,0 @@
-Format is tab separated preferences.
-Activate Vectorwrite	False
-Open File to Write Vector Graphics for	
-Minimum Number of Layers for Multiple Files (integer):	10
-Pixels over Extrusion Width (ratio):	5.0
-windowPositionBehold Preferences	0+0
diff --git a/wipe.csv b/wipe.csv
deleted file mode 100644
index ef41004..0000000
--- a/wipe.csv
+++ /dev/null
@@ -1,14 +0,0 @@
-Format is tab separated preferences.
-Activate Wipe	False
-Open File to be Wiped	
-Location Arrival X (mm):	-70.0
-Location Arrival Y (mm):	-50.0
-Location Arrival Z (mm):	50.0
-Location Departure X (mm):	-70.0
-Location Departure Y (mm):	-40.0
-Location Departure Z (mm):	50.0
-Location Wipe X (mm):	-70.0
-Location Wipe Y (mm):	-70.0
-Location Wipe Z (mm):	50.0
-Wipe Period (layers):	3
-windowPositionBehold Preferences	0+0