diff options
-rw-r--r-- | README | 8 | ||||
-rwxr-xr-x | analyze.csv | 3 | ||||
-rwxr-xr-x | behold.csv | 32 | ||||
-rwxr-xr-x | carve.csv | 12 | ||||
-rwxr-xr-x | clip.csv | 5 | ||||
-rwxr-xr-x | comb.csv | 7 | ||||
-rwxr-xr-x | comment.csv | 4 | ||||
-rwxr-xr-x | cool.csv | 7 | ||||
-rwxr-xr-x | export.csv | 12 | ||||
-rwxr-xr-x | fill.csv | 22 | ||||
-rwxr-xr-x | fillet.csv | 12 | ||||
-rwxr-xr-x | gcode_scripts/end.txt | 9 | ||||
-rwxr-xr-x | gcode_scripts/start.txt | 20 | ||||
-rwxr-xr-x | hop.csv | 6 | ||||
-rwxr-xr-x | inset.csv | 8 | ||||
-rwxr-xr-x | material.csv | 4 | ||||
-rwxr-xr-x | multiply.csv | 9 | ||||
-rwxr-xr-x | oozebane.csv | 12 | ||||
-rwxr-xr-x | polyfile.csv | 4 | ||||
-rwxr-xr-x | raft_ABS.csv | 33 | ||||
-rwxr-xr-x | skeinforge.csv | 3 | ||||
-rwxr-xr-x | skeinview.csv | 9 | ||||
-rwxr-xr-x | speed.csv | 16 | ||||
-rwxr-xr-x | statistic.csv | 6 | ||||
-rwxr-xr-x | stretch.csv | 8 | ||||
-rwxr-xr-x | tower.csv | 7 | ||||
-rwxr-xr-x | unpause.csv | 6 | ||||
-rwxr-xr-x | vectorwrite.csv | 6 | ||||
-rwxr-xr-x | wipe.csv | 14 |
29 files changed, 304 insertions, 0 deletions
@@ -0,0 +1,8 @@ +Fubar Lab's Matt Hagan's MK5 Heated Platform Skein Forge Settings +http://fubarlabs.com + +Heated Platfor is raised to 120 Celsius. + +Below will be the diff between official version and this version. + + diff --git a/analyze.csv b/analyze.csv new file mode 100755 index 0000000..3d6b1a7 --- /dev/null +++ b/analyze.csv @@ -0,0 +1,3 @@ +Format is tab separated preferences. +Open File to be Analyzed +windowPositionBehold Preferences 0+0 diff --git a/behold.csv b/behold.csv new file mode 100755 index 0000000..84de7f8 --- /dev/null +++ b/behold.csv @@ -0,0 +1,32 @@ +Format is tab separated preferences. +Activate Behold False +Band Height (layers): 5 +Bottom Band Brightness (ratio): 0.7 +Bottom Layer Brightness (ratio): 1.0 +From the Bottom False +From the Top True +Draw Arrows True +Open File to Behold +Go Around Extruder Off Travel False +Layers From (index): 0 +Layers To (index): 999999 +Number of Fill Bottom Layers (integer): 1 +Number of Fill Top Layers (integer): 1 +Pixels over Extrusion Width (ratio): 10.0 +Screen Horizontal Inset (pixels): 100 +Screen Vertical Inset (pixels): 50 +Viewpoint Latitude (degrees): 45.0 +Viewpoint Longitude (degrees): 210.0 +Width of Extrusion Thread (pixels): 1 +Width of Fill Bottom Thread (pixels): 3 +Width of Fill Top Thread (pixels): 3 +Width of Loop Thread (pixels): 3 +Width of Perimeter Inside Thread (pixels): 4 +Width of Perimeter Outside Thread (pixels): 4 +Width of Raft Thread (pixels): 1 +Width of Travel Thread (pixels): 0 +Width of X Axis (pixels): 5 +Width of Y Axis (pixels): 5 +Width of Z Axis (pixels): 5 +windowPositionBehold Dynamic Preferences 0+0 +windowPositionBehold Preferences 0+0 diff --git a/carve.csv b/carve.csv new file mode 100755 index 0000000..f198a7f --- /dev/null +++ b/carve.csv @@ -0,0 +1,12 @@ +Format is tab separated preferences. +Extrusion Width over Thickness (ratio): 1.8 +Open File to be Carved +Import Coarseness (ratio): 1.0 +Correct Mesh True +Unproven Mesh False +Infill Bridge Thickness over Layer Thickness (ratio): 1.0 +Infill Bridge Width over Extrusion Width (ratio): 1.0 +Infill in Direction of Bridges True +Layer Thickness (mm): 0.37 +Layer Thickness over Precision (ratio): 10.0 +windowPositionBehold Preferences 0+0 diff --git a/clip.csv b/clip.csv new file mode 100755 index 0000000..8019832 --- /dev/null +++ b/clip.csv @@ -0,0 +1,5 @@ +Format is tab separated preferences. +Activate Clip True +Clip Over Extrusion Width (ratio): 0.18 +Open File to be Clipped +windowPositionBehold Preferences 0+0 diff --git a/comb.csv b/comb.csv new file mode 100755 index 0000000..b4d3214 --- /dev/null +++ b/comb.csv @@ -0,0 +1,7 @@ +Format is tab separated preferences. +Activate Comb True +Arrival Inset Follow Distance over Extrusion Width (ratio): 3.0 +Jitter Over Extrusion Width (ratio): 10.0 +Minimum Perimeter Departure Distance over Extrusion Width (ratio): 5.0 +Open File to be Combed +windowPositionBehold Preferences 0+0 diff --git a/comment.csv b/comment.csv new file mode 100755 index 0000000..0a2b5d2 --- /dev/null +++ b/comment.csv @@ -0,0 +1,4 @@ +Format is tab separated preferences. +Activate Comment False +Open File to Write Comments for +windowPositionBehold Preferences 0+0 diff --git a/cool.csv b/cool.csv new file mode 100755 index 0000000..3e4b33e --- /dev/null +++ b/cool.csv @@ -0,0 +1,7 @@ +Format is tab separated preferences. +Activate Cool False +Open File to be Cooled +Minimum Layer Time (seconds): 60.0 +Turn Fan On at Beginning True +Turn Fan Off at Ending True +windowPositionBehold Preferences 0+0 diff --git a/export.csv b/export.csv new file mode 100755 index 0000000..0abbe57 --- /dev/null +++ b/export.csv @@ -0,0 +1,12 @@ +Format is tab separated preferences. +Activate Export True +Also Send Output To: +Delete Comments False +Delete M110 Gcode Line True +binary_16_byte False +Do Not Change Output True +gcode_small False +gcode_step False +File Extension: gcode +Open File to be Exported +windowPositionBehold Preferences 0+0 diff --git a/fill.csv b/fill.csv new file mode 100755 index 0000000..2235468 --- /dev/null +++ b/fill.csv @@ -0,0 +1,22 @@ +Format is tab separated preferences. +Diaphragm Period (layers): 999999 +Diaphragm Thickness (layers): 0 +Extra Shells on Alternating Solid Layer (layers): 1 +Extra Shells on Base (layers): 2 +Extra Shells on Sparse Layer (layers): 1 +Grid Extra Overlap (ratio): 0.005 +Grid Junction Separation Band Height (layers): 10 +Grid Junction Separation over Octogon Radius At End (ratio): 0.0 +Grid Junction Separation over Octogon Radius At Middle (ratio): 0.0 +Open File to be Filled +Infill Begin Rotation (degrees): 45.0 +Infill Begin Rotation Repeat (layers): 1 +Infill Solidity (ratio): 0.23 +Infill Odd Layer Extra Rotation (degrees): 90.0 +Grid Hexagonal True +Grid Rectangular False +Line False +Interior Infill Density over Exterior Density (ratio): 0.1 +Outside Extruded First True +Solid Surface Thickness (layers): 2 +windowPositionBehold Preferences 0+0 diff --git a/fillet.csv b/fillet.csv new file mode 100755 index 0000000..eadb68e --- /dev/null +++ b/fillet.csv @@ -0,0 +1,12 @@ +Format is tab separated preferences. +Activate Fillet True +Arc Point False +Arc Radius False +Arc Segment False +Bevel True +Corner Feedrate over Operating Feedrate (ratio): 1.0 +Fillet Radius over Extrusion Width (ratio): 0.35 +Open File to be Filleted +Reversal Slowdown Distance over Extrusion Width (ratio): 0.5 +Use Intermediate Feedrate in Corners False +windowPositionBehold Preferences 0+0 diff --git a/gcode_scripts/end.txt b/gcode_scripts/end.txt new file mode 100755 index 0000000..c1c26a7 --- /dev/null +++ b/gcode_scripts/end.txt @@ -0,0 +1,9 @@ +(end of the file, cooldown routines) +M104 S0 T0 (temp zero) +M109 S0 T0 (platform off) +M106 (fan on) +G92 Z0 (zero our z axis - hack b/c skeinforge mangles gcodes in end.txt) +G1 Z10 (go up 10 b/c it was zeroed earlier.) +G1 X0 Y0 Z10 (go to 0,0,z) +M18 (turn off steppers.) + diff --git a/gcode_scripts/start.txt b/gcode_scripts/start.txt new file mode 100755 index 0000000..1d32925 --- /dev/null +++ b/gcode_scripts/start.txt @@ -0,0 +1,20 @@ +(Cupcake ABS with heated build platform skeinforge profile) +(beginning of start.txt) +M104 S220 T0 (Extruder Temperature to 220 Celsius) +M109 S120 T0 (Heated Platform Temperature to 110 Celsius) +M107 (fan off) +G21 (Metric FTW) +G90 (Absolute Positioning) +G92 X0 Y0 Z0 (You are now at 0,0,0) +(You have failed me for the last time, MakerBot) +G0 Z15 (Move up for warmup) +M108 S255 (Extruder speed = max) +M6 T0 (Wait for tool to heat up) +G04 P5000 (Wait 5 seconds) +M101 (Extruder on, forward) +G04 P5000 (Wait 5 seconds) +M103 (Extruder off) +M01 (The heated build platform is heating up. Wait until after the lights have turned off for the first time, clear the test extrusion, and click yes.) +G0 Z0 (Go back to zero.) +(end of start.txt) + @@ -0,0 +1,6 @@ +Format is tab separated preferences. +Activate Hop False +Open File to be Hopped +Hop Over Layer Thickness (ratio): 1.0 +Minimum Hop Angle (degrees): 20.0 +windowPositionBehold Preferences 0+0 diff --git a/inset.csv b/inset.csv new file mode 100755 index 0000000..bd56288 --- /dev/null +++ b/inset.csv @@ -0,0 +1,8 @@ +Format is tab separated preferences. +Extrusion Perimeter Width over Thickness (ratio): 1.583 +Open File to be Insetted +Infill Perimeter Overlap (ratio): 0.15 +Calculate Overlap from Perimeter and Infill True +Calculate Overlap from Perimeter Only False +Start at Home True +windowPositionBehold Preferences 0+0 diff --git a/material.csv b/material.csv new file mode 100755 index 0000000..2153ca3 --- /dev/null +++ b/material.csv @@ -0,0 +1,4 @@ +Format is tab separated preferences. +Material List: ABS HDPE PCL PLA +Material Selection: ABS +windowPositionBehold Preferences 0+0 diff --git a/multiply.csv b/multiply.csv new file mode 100755 index 0000000..b8ae9d8 --- /dev/null +++ b/multiply.csv @@ -0,0 +1,9 @@ +Format is tab separated preferences. +Activate Multiply: True +Center X (millimeters): 0.0 +Center Y (millimeters): 0.0 +Open File to be Multiplied +Number of Columns (integer): 1 +Number of Rows (integer): 1 +Separation over Extrusion Width (ratio): 10.0 +windowPositionBehold Preferences 0+0 diff --git a/oozebane.csv b/oozebane.csv new file mode 100755 index 0000000..58e8702 --- /dev/null +++ b/oozebane.csv @@ -0,0 +1,12 @@ +Format is tab separated preferences. +Activate Oozebane True +After Startup Distance (millimeters): 0.275 +Early Shutdown Distance (millimeters): 0.3 +Early Startup Distance Constant (millimeters): 20.0 +Early Startup Maximum Distance (millimeters): 5.25 +First Early Startup Distance (millimeters): 20.0 +Open File to be Oozebaned +Minimum Distance for Early Startup (millimeters): 0.01 +Minimum Distance for Early Shutdown (millimeters): 1.0 +Slowdown Startup Steps (positive integer): 1 +windowPositionBehold Preferences 0+0 diff --git a/polyfile.csv b/polyfile.csv new file mode 100755 index 0000000..ecb5dcc --- /dev/null +++ b/polyfile.csv @@ -0,0 +1,4 @@ +Format is tab separated preferences. +Execute All Unmodified Files in a Directory False +Execute File True +windowPositionBehold Preferences 0+0 diff --git a/raft_ABS.csv b/raft_ABS.csv new file mode 100755 index 0000000..9a608f0 --- /dev/null +++ b/raft_ABS.csv @@ -0,0 +1,33 @@ +Format is tab separated preferences. +Activate Raft: False +Add Raft, Elevate Nozzle, Orbit and Set Altitude: True +Base Infill Density (ratio): 0.28 +Base Layer Thickness over Layer Thickness: 1.8 +Base Layers (integer): 1 +Base Nozzle Lift over Half Base Layer Thickness (ratio): 0.4 +Bottom Altitude: 0.1 +Open File to be Rafted +Infill Overhang (ratio): 0.1 +Interface Infill Density (ratio): 0.4 +Interface Layer Thickness over Layer Thickness: 1.0 +Interface Layers (integer): 1 +Interface Nozzle Lift over Half Interface Layer Thickness (ratio): 0.5 +Operating Nozzle Lift over Half Layer Thickness (ratio): 1.0 +Raft Outset Radius over Extrusion Width (ratio): 7.5 +Support Inset over Perimeter Extrusion Width (ratio): 0.0 +No Support Material True +Support Material Everywhere False +Support Material on Exterior Only False +Support Minimum Angle (degrees): 60.0 +Temperature Change Time Before Raft (seconds): 0.0 +Temperature Change Time Before First Layer Outline (seconds): 0.0 +Temperature Change Time Before Next Threads (seconds): 0.0 +Temperature Change Time Before Support Layers (seconds): 0.0 +Temperature Change Time Before Supported Layers (seconds): 0.0 +Temperature of Raft (Celcius): 230.0 +Temperature of Shape First Layer Outline (Celcius): 215.0 +Temperature of Shape First Layer Within (Celcius): 215.0 +Temperature of Shape Next Layers (Celcius): 220.0 +Temperature of Support Layers (Celcius): 220.0 +Temperature of Supported Layers (Celcius): 220.0 +windowPositionRaft Preferences 7+51 diff --git a/skeinforge.csv b/skeinforge.csv new file mode 100755 index 0000000..980129b --- /dev/null +++ b/skeinforge.csv @@ -0,0 +1,3 @@ +Format is tab separated preferences. +Open File to be Skeinforged +windowPositionBehold Preferences 0+0 diff --git a/skeinview.csv b/skeinview.csv new file mode 100755 index 0000000..df4ac6e --- /dev/null +++ b/skeinview.csv @@ -0,0 +1,9 @@ +Format is tab separated preferences. +Activate Skeinview False +Draw Arrows True +Open File to Skeinview +Go Around Extruder Off Travel False +Pixels over Extrusion Width (ratio): 10.0 +Screen Horizontal Inset (pixels): 100 +Screen Vertical Inset (pixels): 100 +windowPositionBehold Preferences 0+0 diff --git a/speed.csv b/speed.csv new file mode 100755 index 0000000..d3a7505 --- /dev/null +++ b/speed.csv @@ -0,0 +1,16 @@ +Format is tab separated preferences. +Activate Speed: True +Bridge Feedrate Multiplier (ratio): 1.0 +Extrusion Diameter over Thickness (ratio): 1.583 +Feedrate (mm/s): 30.0 +Open File to be Speeded +Do Not Add Flowrate False +Metric False +PWM Setting True +Flowrate PWM Setting (if PWM Setting is Chosen): 230.0 +Orbital Feedrate over Operating Feedrate (ratio): 1.0 +Perimeter Feedrate over Operating Feedrate (ratio): 1.0 +Perimeter Flowrate over Operating Flowrate (ratio): 1.0 +Support Flowrate over Operating Flowrate (ratio): 1.0 +Travel Feedrate (mm/s): 30.0 +windowPositionBehold Preferences 0+0 diff --git a/statistic.csv b/statistic.csv new file mode 100755 index 0000000..95eded8 --- /dev/null +++ b/statistic.csv @@ -0,0 +1,6 @@ +Format is tab separated preferences. +Activate Statistic True +Open File to Generate Statistics for +Print Statistics True +Save Statistics False +windowPositionBehold Preferences 0+0 diff --git a/stretch.csv b/stretch.csv new file mode 100755 index 0000000..e6afe28 --- /dev/null +++ b/stretch.csv @@ -0,0 +1,8 @@ +Format is tab separated preferences. +Activate Stretch False +Loop Stretch Over Extrusion Width (ratio): 0.15 +Path Stretch Over Extrusion Width (ratio): 0.0 +Open File to be Stretched +Stretch From Distance Over Extrusion Width (ratio): 2.0 +Perimeter Maximum Stretch Over Extrusion Width (ratio): 0.3 +windowPositionBehold Preferences 0+0 diff --git a/tower.csv b/tower.csv new file mode 100755 index 0000000..5f5c2d2 --- /dev/null +++ b/tower.csv @@ -0,0 +1,7 @@ +Format is tab separated preferences. +Activate Tower False +Extruder Possible Collision Cone Angle (degrees): 60.0 +Open File to be Towered +Maximum Tower Height (layers): 10 +Tower Start Layer (integer): 2 +windowPositionBehold Preferences 0+0 diff --git a/unpause.csv b/unpause.csv new file mode 100755 index 0000000..b77ef20 --- /dev/null +++ b/unpause.csv @@ -0,0 +1,6 @@ +Format is tab separated preferences. +Activate Unpause False +Delay (milliseconds): 28.0 +Open File to be Unpaused +Maximum Speed (ratio): 1.5 +windowPositionBehold Preferences 0+0 diff --git a/vectorwrite.csv b/vectorwrite.csv new file mode 100755 index 0000000..2349e84 --- /dev/null +++ b/vectorwrite.csv @@ -0,0 +1,6 @@ +Format is tab separated preferences. +Activate Vectorwrite False +Open File to Write Vector Graphics for +Minimum Number of Layers for Multiple Files (integer): 10 +Pixels over Extrusion Width (ratio): 5.0 +windowPositionBehold Preferences 0+0 diff --git a/wipe.csv b/wipe.csv new file mode 100755 index 0000000..ef41004 --- /dev/null +++ b/wipe.csv @@ -0,0 +1,14 @@ +Format is tab separated preferences. +Activate Wipe False +Open File to be Wiped +Location Arrival X (mm): -70.0 +Location Arrival Y (mm): -50.0 +Location Arrival Z (mm): 50.0 +Location Departure X (mm): -70.0 +Location Departure Y (mm): -40.0 +Location Departure Z (mm): 50.0 +Location Wipe X (mm): -70.0 +Location Wipe Y (mm): -70.0 +Location Wipe Z (mm): 50.0 +Wipe Period (layers): 3 +windowPositionBehold Preferences 0+0 |