diff options
Diffstat (limited to 'profiles/extrusion/ABS/raft.csv')
| -rw-r--r-- | profiles/extrusion/ABS/raft.csv | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/profiles/extrusion/ABS/raft.csv b/profiles/extrusion/ABS/raft.csv index ab0a273..4591866 100644 --- a/profiles/extrusion/ABS/raft.csv +++ b/profiles/extrusion/ABS/raft.csv @@ -7,21 +7,21 @@ Add Raft, Elevate Nozzle, Orbit and Set Altitude: True Base Feed Rate Multiplier (ratio): 0.6 Base Flow Rate Multiplier (ratio): 1.0 Base Infill Density (ratio): 0.5 -Base Layer Thickness over Layer Thickness: 2.0 +Base Layer Thickness over Layer Thickness: 2.2 Base Layers (integer): 1 -Base Nozzle Lift over Base Layer Thickness (ratio): 0.8 +Base Nozzle Lift over Base Layer Thickness (ratio): 0.4 Initial Circling: False Infill Overhang over Extrusion Width (ratio): 0.05 Interface Feed Rate Multiplier (ratio): 1.4 Interface Flow Rate Multiplier (ratio): 1.0 -Interface Infill Density (ratio): 0.65 -Interface Layer Thickness over Layer Thickness: 1.2 -Interface Layers (integer): 1 -Interface Nozzle Lift over Interface Layer Thickness (ratio): 0.2 +Interface Infill Density (ratio): 0.4 +Interface Layer Thickness over Layer Thickness: 1.4 +Interface Layers (integer): 2 +Interface Nozzle Lift over Interface Layer Thickness (ratio): 0.5 Object First Layer Feed Rate Infill Multiplier (ratio): 0.65 Object First Layer Feed Rate Perimeter Multiplier (ratio): 0.75 Object First Layer Flow Rate Multiplier (ratio): 1.0 -Operating Nozzle Lift over Layer Thickness (ratio): 1.2 +Operating Nozzle Lift over Layer Thickness (ratio): 1.0 Raft Additional Margin over Length (%): 1.3 Raft Margin (mm): 5.0 Support Cross Hatch False |