diff options
Diffstat (limited to 'raft_ABS.csv')
| -rw-r--r-- | raft_ABS.csv | 33 |
1 files changed, 33 insertions, 0 deletions
diff --git a/raft_ABS.csv b/raft_ABS.csv new file mode 100644 index 0000000..04cecd0 --- /dev/null +++ b/raft_ABS.csv @@ -0,0 +1,33 @@ +Format is tab separated preferences. +Activate Raft: True +Add Raft, Elevate Nozzle, Orbit and Set Altitude: True +Base Infill Density (ratio): 0.28 +Base Layer Thickness over Layer Thickness: 1.8 +Base Layers (integer): 1 +Base Nozzle Lift over Half Base Layer Thickness (ratio): 0.4 +Bottom Altitude: 0.1 +Open File to be Rafted +Infill Overhang (ratio): 0.1 +Interface Infill Density (ratio): 0.4 +Interface Layer Thickness over Layer Thickness: 1.0 +Interface Layers (integer): 1 +Interface Nozzle Lift over Half Interface Layer Thickness (ratio): 0.5 +Operating Nozzle Lift over Half Layer Thickness (ratio): 1.0 +Raft Outset Radius over Extrusion Width (ratio): 7.5 +Support Inset over Perimeter Extrusion Width (ratio): 0.0 +No Support Material True +Support Material Everywhere False +Support Material on Exterior Only False +Support Minimum Angle (degrees): 60.0 +Temperature Change Time Before Raft (seconds): 0.0 +Temperature Change Time Before First Layer Outline (seconds): 0.0 +Temperature Change Time Before Next Threads (seconds): 0.0 +Temperature Change Time Before Support Layers (seconds): 0.0 +Temperature Change Time Before Supported Layers (seconds): 0.0 +Temperature of Raft (Celcius): 230.0 +Temperature of Shape First Layer Outline (Celcius): 215.0 +Temperature of Shape First Layer Within (Celcius): 215.0 +Temperature of Shape Next Layers (Celcius): 220.0 +Temperature of Support Layers (Celcius): 220.0 +Temperature of Supported Layers (Celcius): 220.0 +windowPositionRaft Preferences 6+23 |