1 files changed, 43 insertions, 14 deletions
diff --git a/trasmitter/sender-chip.pl b/trasmitter/sender-chip.pl
index 27ae20e..f6d3dd3 100644
--- a/trasmitter/sender-chip.pl
+++ b/trasmitter/sender-chip.pl
@@ -3,12 +3,12 @@ use strict;
 use warnings;
 use Time::HiRes qw(usleep sleep gettimeofday tv_interval);
 
-my $base = do {
-    open my $fh,'<','/sys/class/gpio/gpiochip405/base' or die "can't get base: $!";
-    my $line = <$fh>;
-    chomp($line);
-    $line;
-};
+# my $base = do {
+#     open my $fh,'<','/sys/class/gpio/gpiochip405/base' or die "can't get base: $!";
+#     my $line = <$fh>;
+#     chomp($line);
+#     $line;
+# };
 
 sub gpio_enable {
     my ($pin,$state) = @_;
@@ -49,14 +49,43 @@ gpio_write($pin,0);
 $SIG{INT} = sub {warn"disabling";gpio_enable($pin,0) };
 END { warn"disabling";gpio_enable($pin,0) }
 
-my $width = 400; # this seems to provide pulse widths close enough to
+my $width = 370; # this seems to provide pulse widths close enough to
                  # what we need, it's 106 samples at 192kHz
-while (1) {
-    for (0..50) {
-        gpio_write($pin,1);
-        usleep($width);
-        gpio_write($pin,0);
-        usleep($width);
+
+sub send_array {
+    my $state = 1;
+    for (@_) {
+        gpio_write($pin,$state);
+        usleep($width*$_);
+        $state = $state ? 0 : 1;
     }
-    sleep(0.5);
 }
+
+my @prologue = (
+    1,1, 1,1, 1,1, 1,1, 1,1, 1,1,
+    2,3, 1,1, 2,2, 1,1, 1,1, 2,1,
+    1,1, 1,1, 1,2, 1,1, 1,1, 1,1,
+    1,1, 1,1,
+);
+my @epilogue = (
+  1,2, 2,2, 1,3, # the last value doesn't much matter
+);
+
+my @on_signal = (
+    2,2, 1,1, 1,1, 1,1, 1,1, 2,1, 1,1,
+);
+my @off_signal = (
+    1,1, 1,1, 1,1, 1,1, 1,1, 2,2, 2,1,
+);
+
+my @train = (
+    @prologue,
+    ( $ARGV[0] ? @on_signal : @off_signal ),
+    @epilogue,
+);
+
+send_array(@train);
+sleep(1);
+send_array(@train);
+sleep(2);
+send_array(@train);