Skeinforg Settings Imported

29 files changed, 304 insertions, 0 deletions

diff --git a/README b/README
index e69de29..43d117c 100644
--- a/README
+++ b/README
@@ -0,0 +1,8 @@
+Fubar Lab's Matt Hagan's MK5 Heated Platform Skein Forge Settings
+http://fubarlabs.com
+
+Heated Platfor is raised to 120 Celsius.
+
+Below will be the diff between official version and this version.
+
+
diff --git a/analyze.csv b/analyze.csv
new file mode 100755
index 0000000..3d6b1a7
--- /dev/null
+++ b/analyze.csv
@@ -0,0 +1,3 @@
+Format is tab separated preferences.
+Open File to be Analyzed	
+windowPositionBehold Preferences	0+0
diff --git a/behold.csv b/behold.csv
new file mode 100755
index 0000000..84de7f8
--- /dev/null
+++ b/behold.csv
@@ -0,0 +1,32 @@
+Format is tab separated preferences.
+Activate Behold	False
+Band Height (layers):	5
+Bottom Band Brightness (ratio):	0.7
+Bottom Layer Brightness (ratio):	1.0
+From the Bottom	False
+From the Top	True
+Draw Arrows	True
+Open File to Behold	
+Go Around Extruder Off Travel	False
+Layers From (index):	0
+Layers To (index):	999999
+Number of Fill Bottom Layers (integer):	1
+Number of Fill Top Layers (integer):	1
+Pixels over Extrusion Width (ratio):	10.0
+Screen Horizontal Inset (pixels):	100
+Screen Vertical Inset (pixels):	50
+Viewpoint Latitude (degrees):	45.0
+Viewpoint Longitude (degrees):	210.0
+Width of Extrusion Thread (pixels):	1
+Width of Fill Bottom Thread (pixels):	3
+Width of Fill Top Thread (pixels):	3
+Width of Loop Thread (pixels):	3
+Width of Perimeter Inside Thread (pixels):	4
+Width of Perimeter Outside Thread (pixels):	4
+Width of Raft Thread (pixels):	1
+Width of Travel Thread (pixels):	0
+Width of X Axis (pixels):	5
+Width of Y Axis (pixels):	5
+Width of Z Axis (pixels):	5
+windowPositionBehold Dynamic Preferences	0+0
+windowPositionBehold Preferences	0+0
diff --git a/carve.csv b/carve.csv
new file mode 100755
index 0000000..f198a7f
--- /dev/null
+++ b/carve.csv
@@ -0,0 +1,12 @@
+Format is tab separated preferences.
+Extrusion Width over Thickness (ratio):	1.8
+Open File to be Carved	
+Import Coarseness (ratio):	1.0
+Correct Mesh	True
+Unproven Mesh	False
+Infill Bridge Thickness over Layer Thickness (ratio):	1.0
+Infill Bridge Width over Extrusion Width (ratio):	1.0
+Infill in Direction of Bridges	True
+Layer Thickness (mm):	0.37
+Layer Thickness over Precision (ratio):	10.0
+windowPositionBehold Preferences	0+0
diff --git a/clip.csv b/clip.csv
new file mode 100755
index 0000000..8019832
--- /dev/null
+++ b/clip.csv
@@ -0,0 +1,5 @@
+Format is tab separated preferences.
+Activate Clip	True
+Clip Over Extrusion Width (ratio):	0.18
+Open File to be Clipped	
+windowPositionBehold Preferences	0+0
diff --git a/comb.csv b/comb.csv
new file mode 100755
index 0000000..b4d3214
--- /dev/null
+++ b/comb.csv
@@ -0,0 +1,7 @@
+Format is tab separated preferences.
+Activate Comb	True
+Arrival Inset Follow Distance over Extrusion Width (ratio):	3.0
+Jitter Over Extrusion Width (ratio):	10.0
+Minimum Perimeter Departure Distance over Extrusion Width (ratio):	5.0
+Open File to be Combed	
+windowPositionBehold Preferences	0+0
diff --git a/comment.csv b/comment.csv
new file mode 100755
index 0000000..0a2b5d2
--- /dev/null
+++ b/comment.csv
@@ -0,0 +1,4 @@
+Format is tab separated preferences.
+Activate Comment	False
+Open File to Write Comments for	
+windowPositionBehold Preferences	0+0
diff --git a/cool.csv b/cool.csv
new file mode 100755
index 0000000..3e4b33e
--- /dev/null
+++ b/cool.csv
@@ -0,0 +1,7 @@
+Format is tab separated preferences.
+Activate Cool	False
+Open File to be Cooled	
+Minimum Layer Time (seconds):	60.0
+Turn Fan On at Beginning	True
+Turn Fan Off at Ending	True
+windowPositionBehold Preferences	0+0
diff --git a/export.csv b/export.csv
new file mode 100755
index 0000000..0abbe57
--- /dev/null
+++ b/export.csv
@@ -0,0 +1,12 @@
+Format is tab separated preferences.
+Activate Export	True
+Also Send Output To:	
+Delete Comments	False
+Delete M110 Gcode Line	True
+binary_16_byte	False
+Do Not Change Output	True
+gcode_small	False
+gcode_step	False
+File Extension:	gcode
+Open File to be Exported	
+windowPositionBehold Preferences	0+0
diff --git a/fill.csv b/fill.csv
new file mode 100755
index 0000000..2235468
--- /dev/null
+++ b/fill.csv
@@ -0,0 +1,22 @@
+Format is tab separated preferences.
+Diaphragm Period (layers):	999999
+Diaphragm Thickness (layers):	0
+Extra Shells on Alternating Solid Layer (layers):	1
+Extra Shells on Base (layers):	2
+Extra Shells on Sparse Layer (layers):	1
+Grid Extra Overlap (ratio):	0.005
+Grid Junction Separation Band Height (layers):	10
+Grid Junction Separation over Octogon Radius At End (ratio):	0.0
+Grid Junction Separation over Octogon Radius At Middle (ratio):	0.0
+Open File to be Filled	
+Infill Begin Rotation (degrees):	45.0
+Infill Begin Rotation Repeat (layers):	1
+Infill Solidity (ratio):	0.23
+Infill Odd Layer Extra Rotation (degrees):	90.0
+Grid Hexagonal	True
+Grid Rectangular	False
+Line	False
+Interior Infill Density over Exterior Density (ratio):	0.1
+Outside Extruded First	True
+Solid Surface Thickness (layers):	2
+windowPositionBehold Preferences	0+0
diff --git a/fillet.csv b/fillet.csv
new file mode 100755
index 0000000..eadb68e
--- /dev/null
+++ b/fillet.csv
@@ -0,0 +1,12 @@
+Format is tab separated preferences.
+Activate Fillet	True
+Arc Point	False
+Arc Radius	False
+Arc Segment	False
+Bevel	True
+Corner Feedrate over Operating Feedrate (ratio):	1.0
+Fillet Radius over Extrusion Width (ratio):	0.35
+Open File to be Filleted	
+Reversal Slowdown Distance over Extrusion Width (ratio):	0.5
+Use Intermediate Feedrate in Corners	False
+windowPositionBehold Preferences	0+0
diff --git a/gcode_scripts/end.txt b/gcode_scripts/end.txt
new file mode 100755
index 0000000..c1c26a7
--- /dev/null
+++ b/gcode_scripts/end.txt
@@ -0,0 +1,9 @@
+(end of the file, cooldown routines)
+M104 S0 T0 (temp zero)
+M109 S0 T0 (platform off)
+M106 (fan on)
+G92 Z0 (zero our z axis - hack b/c skeinforge mangles gcodes in end.txt)
+G1 Z10 (go up 10 b/c it was zeroed earlier.)
+G1 X0 Y0 Z10 (go to 0,0,z)
+M18 (turn off steppers.)
+
diff --git a/gcode_scripts/start.txt b/gcode_scripts/start.txt
new file mode 100755
index 0000000..1d32925
--- /dev/null
+++ b/gcode_scripts/start.txt
@@ -0,0 +1,20 @@
+(Cupcake ABS with heated build platform skeinforge profile)
+(beginning of start.txt)
+M104 S220 T0 (Extruder Temperature to 220 Celsius)
+M109 S120 T0 (Heated Platform Temperature to 110 Celsius)
+M107 (fan off)
+G21 (Metric FTW)
+G90 (Absolute Positioning)
+G92 X0 Y0 Z0 (You are now at 0,0,0)
+(You have failed me for the last time, MakerBot)
+G0 Z15 (Move up for warmup)
+M108 S255 (Extruder speed = max)
+M6 T0 (Wait for tool to heat up)
+G04 P5000 (Wait 5 seconds)
+M101 (Extruder on, forward)
+G04 P5000 (Wait 5 seconds)
+M103 (Extruder off)
+M01 (The heated build platform is heating up. Wait until after the lights have turned off for the first time, clear the test extrusion, and click yes.)
+G0 Z0    (Go back to zero.)
+(end of start.txt)
+
diff --git a/hop.csv b/hop.csv
new file mode 100755
index 0000000..914f48b
--- /dev/null
+++ b/hop.csv
@@ -0,0 +1,6 @@
+Format is tab separated preferences.
+Activate Hop	False
+Open File to be Hopped	
+Hop Over Layer Thickness (ratio):	1.0
+Minimum Hop Angle (degrees):	20.0
+windowPositionBehold Preferences	0+0
diff --git a/inset.csv b/inset.csv
new file mode 100755
index 0000000..bd56288
--- /dev/null
+++ b/inset.csv
@@ -0,0 +1,8 @@
+Format is tab separated preferences.
+Extrusion Perimeter Width over Thickness (ratio):	1.583
+Open File to be Insetted	
+Infill Perimeter Overlap (ratio):	0.15
+Calculate Overlap from Perimeter and Infill	True
+Calculate Overlap from Perimeter Only	False
+Start at Home	True
+windowPositionBehold Preferences	0+0
diff --git a/material.csv b/material.csv
new file mode 100755
index 0000000..2153ca3
--- /dev/null
+++ b/material.csv
@@ -0,0 +1,4 @@
+Format is tab separated preferences.
+Material List:	ABS	HDPE	PCL	PLA
+Material Selection:	ABS
+windowPositionBehold Preferences	0+0
diff --git a/multiply.csv b/multiply.csv
new file mode 100755
index 0000000..b8ae9d8
--- /dev/null
+++ b/multiply.csv
@@ -0,0 +1,9 @@
+Format is tab separated preferences.
+Activate Multiply:	True
+Center X (millimeters):	0.0
+Center Y (millimeters):	0.0
+Open File to be Multiplied	
+Number of Columns (integer):	1
+Number of Rows (integer):	1
+Separation over Extrusion Width (ratio):	10.0
+windowPositionBehold Preferences	0+0
diff --git a/oozebane.csv b/oozebane.csv
new file mode 100755
index 0000000..58e8702
--- /dev/null
+++ b/oozebane.csv
@@ -0,0 +1,12 @@
+Format is tab separated preferences.
+Activate Oozebane	True
+After Startup Distance (millimeters):	0.275
+Early Shutdown Distance (millimeters):	0.3
+Early Startup Distance Constant (millimeters):	20.0
+Early Startup Maximum Distance (millimeters):	5.25
+First Early Startup Distance (millimeters):	20.0
+Open File to be Oozebaned	
+Minimum Distance for Early Startup (millimeters):	0.01
+Minimum Distance for Early Shutdown (millimeters):	1.0
+Slowdown Startup Steps (positive integer):	1
+windowPositionBehold Preferences	0+0
diff --git a/polyfile.csv b/polyfile.csv
new file mode 100755
index 0000000..ecb5dcc
--- /dev/null
+++ b/polyfile.csv
@@ -0,0 +1,4 @@
+Format is tab separated preferences.
+Execute All Unmodified Files in a Directory	False
+Execute File	True
+windowPositionBehold Preferences	0+0
diff --git a/raft_ABS.csv b/raft_ABS.csv
new file mode 100755
index 0000000..9a608f0
--- /dev/null
+++ b/raft_ABS.csv
@@ -0,0 +1,33 @@
+Format is tab separated preferences.
+Activate Raft:	False
+Add Raft, Elevate Nozzle, Orbit and Set Altitude:	True
+Base Infill Density (ratio):	0.28
+Base Layer Thickness over Layer Thickness:	1.8
+Base Layers (integer):	1
+Base Nozzle Lift over Half Base Layer Thickness (ratio):	0.4
+Bottom Altitude:	0.1
+Open File to be Rafted	
+Infill Overhang (ratio):	0.1
+Interface Infill Density (ratio):	0.4
+Interface Layer Thickness over Layer Thickness:	1.0
+Interface Layers (integer):	1
+Interface Nozzle Lift over Half Interface Layer Thickness (ratio):	0.5
+Operating Nozzle Lift over Half Layer Thickness (ratio):	1.0
+Raft Outset Radius over Extrusion Width (ratio):	7.5
+Support Inset over Perimeter Extrusion Width (ratio):	0.0
+No Support Material	True
+Support Material Everywhere	False
+Support Material on Exterior Only	False
+Support Minimum Angle (degrees):	60.0
+Temperature Change Time Before Raft (seconds):	0.0
+Temperature Change Time Before First Layer Outline (seconds):	0.0
+Temperature Change Time Before Next Threads (seconds):	0.0
+Temperature Change Time Before Support Layers (seconds):	0.0
+Temperature Change Time Before Supported Layers (seconds):	0.0
+Temperature of Raft (Celcius):	230.0
+Temperature of Shape First Layer Outline (Celcius):	215.0
+Temperature of Shape First Layer Within (Celcius):	215.0
+Temperature of Shape Next Layers (Celcius):	220.0
+Temperature of Support Layers (Celcius):	220.0
+Temperature of Supported Layers (Celcius):	220.0
+windowPositionRaft Preferences	7+51
diff --git a/skeinforge.csv b/skeinforge.csv
new file mode 100755
index 0000000..980129b
--- /dev/null
+++ b/skeinforge.csv
@@ -0,0 +1,3 @@
+Format is tab separated preferences.
+Open File to be Skeinforged	
+windowPositionBehold Preferences	0+0
diff --git a/skeinview.csv b/skeinview.csv
new file mode 100755
index 0000000..df4ac6e
--- /dev/null
+++ b/skeinview.csv
@@ -0,0 +1,9 @@
+Format is tab separated preferences.
+Activate Skeinview	False
+Draw Arrows	True
+Open File to Skeinview	
+Go Around Extruder Off Travel	False
+Pixels over Extrusion Width (ratio):	10.0
+Screen Horizontal Inset (pixels):	100
+Screen Vertical Inset (pixels):	100
+windowPositionBehold Preferences	0+0
diff --git a/speed.csv b/speed.csv
new file mode 100755
index 0000000..d3a7505
--- /dev/null
+++ b/speed.csv
@@ -0,0 +1,16 @@
+Format is tab separated preferences.
+Activate Speed:	True
+Bridge Feedrate Multiplier (ratio):	1.0
+Extrusion Diameter over Thickness (ratio):	1.583
+Feedrate (mm/s):	30.0
+Open File to be Speeded	
+Do Not Add Flowrate	False
+Metric	False
+PWM Setting	True
+Flowrate PWM Setting (if PWM Setting is Chosen):	230.0
+Orbital Feedrate over Operating Feedrate (ratio):	1.0
+Perimeter Feedrate over Operating Feedrate (ratio):	1.0
+Perimeter Flowrate over Operating Flowrate (ratio):	1.0
+Support Flowrate over Operating Flowrate (ratio):	1.0
+Travel Feedrate (mm/s):	30.0
+windowPositionBehold Preferences	0+0
diff --git a/statistic.csv b/statistic.csv
new file mode 100755
index 0000000..95eded8
--- /dev/null
+++ b/statistic.csv
@@ -0,0 +1,6 @@
+Format is tab separated preferences.
+Activate Statistic	True
+Open File to Generate Statistics for	
+Print Statistics	True
+Save Statistics	False
+windowPositionBehold Preferences	0+0
diff --git a/stretch.csv b/stretch.csv
new file mode 100755
index 0000000..e6afe28
--- /dev/null
+++ b/stretch.csv
@@ -0,0 +1,8 @@
+Format is tab separated preferences.
+Activate Stretch	False
+Loop Stretch Over Extrusion Width (ratio):	0.15
+Path Stretch Over Extrusion Width (ratio):	0.0
+Open File to be Stretched	
+Stretch From Distance Over Extrusion Width (ratio):	2.0
+Perimeter Maximum Stretch Over Extrusion Width (ratio):	0.3
+windowPositionBehold Preferences	0+0
diff --git a/tower.csv b/tower.csv
new file mode 100755
index 0000000..5f5c2d2
--- /dev/null
+++ b/tower.csv
@@ -0,0 +1,7 @@
+Format is tab separated preferences.
+Activate Tower	False
+Extruder Possible Collision Cone Angle (degrees):	60.0
+Open File to be Towered	
+Maximum Tower Height (layers):	10
+Tower Start Layer (integer):	2
+windowPositionBehold Preferences	0+0
diff --git a/unpause.csv b/unpause.csv
new file mode 100755
index 0000000..b77ef20
--- /dev/null
+++ b/unpause.csv
@@ -0,0 +1,6 @@
+Format is tab separated preferences.
+Activate Unpause	False
+Delay (milliseconds):	28.0
+Open File to be Unpaused	
+Maximum Speed (ratio):	1.5
+windowPositionBehold Preferences	0+0
diff --git a/vectorwrite.csv b/vectorwrite.csv
new file mode 100755
index 0000000..2349e84
--- /dev/null
+++ b/vectorwrite.csv
@@ -0,0 +1,6 @@
+Format is tab separated preferences.
+Activate Vectorwrite	False
+Open File to Write Vector Graphics for	
+Minimum Number of Layers for Multiple Files (integer):	10
+Pixels over Extrusion Width (ratio):	5.0
+windowPositionBehold Preferences	0+0
diff --git a/wipe.csv b/wipe.csv
new file mode 100755
index 0000000..ef41004
--- /dev/null
+++ b/wipe.csv
@@ -0,0 +1,14 @@
+Format is tab separated preferences.
+Activate Wipe	False
+Open File to be Wiped	
+Location Arrival X (mm):	-70.0
+Location Arrival Y (mm):	-50.0
+Location Arrival Z (mm):	50.0
+Location Departure X (mm):	-70.0
+Location Departure Y (mm):	-40.0
+Location Departure Z (mm):	50.0
+Location Wipe X (mm):	-70.0
+Location Wipe Y (mm):	-70.0
+Location Wipe Z (mm):	50.0
+Wipe Period (layers):	3
+windowPositionBehold Preferences	0+0